Ksports KSU1101 Home Spin Bike Instruction Manual
- May 15, 2024
- KSPORTS
Table of Contents
INSTRUCTION MANUAL
SPIN BIKE FOR HOME USE
Model No. KSU1101
KSU1101 Home Spin Bike
Note: Please read this instruction manual carefully before installing or using the product & retain it for future reference.
IMPORTANT SAFETY INFORMATION
Warning: to reduce the risk of injury, read the following safety
instructions before using the equipment.
Important: this unit is intended for home use only.
- It is important to read this entire manual before assembling and using the equipment. Safe and efficient use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.
- Before starting any exercise program, you should consult your doctor to determine if you have any physical or health conditions that could create a risk to your health and safety or prevent you from using the equipment properly. Your doctor’s advice is essential if you are taking medication that affects your heart rate, blood pressure or cholesterol level.
- Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.
- Stop exercising if you experience any of the following symptoms: Pain, tightness in your chest, irregular heartbeat, extreme shortness of breath, feeling lightheaded, dizzy, or nauseous. If you do experience any of these conditions, you should consult your doctor before continuing with your exercise program.
- Keep children and pets away from the equipment. The equipment is designed for adult use only.
- Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. For safety, the equipment should have at least 0.6 meter of free space all around it.
- Before using the equipment, check the nuts and bolts are securely tightened.
- The safety level of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
- Always use the equipment as indicated. If you find any defective components whilst assembling or checking the equipment, or if you hear any unusual noise coming from the equipment during use, stop. Do not use the equipment until the problem has been rectified.
- Wear suitable clothing whilst using the equipment. Avoid wearing loose clothing which may get caught in the equipment or that may restrict or prevent movement.
- The equipment has been tested and certified to EN ISO 20957-1;EN ISO 20957-5 under class H.C. Suitable for domestic, home use only. Maximum weight of user 265lb (120kg).
- This equipment is not suitable for high precision applications.
- Care must be taken when lifting or moving the equipment so as not to injure your back.
Always use proper lifting techniques and/or use assistance.
EXPLODED DRAWING OF PARTS LIST
EXPLODED DRAWING OF SPIN BIKE
PARTS LIST
NO.| NAME| SIZE| QTY.| | NO.| NAME| SIZE|
QTY.
---|---|---|---|---|---|---|---|---
1| Main Body| Assembly| 1| 15| Adjusting Knob| M10| 1
2| Front Stabilizer| Assembly| 1| 16| Carriage Bolts| M8X40| 4
3| Rear Stabilizer| Assembly| 1| 17| Flat Washer| 08.5| 4
4| Saddle Post| Assembly| 1| 18| Cover Nut| M8| 4
5| Handle Post| Assembly| 1| 19| Flat Washer| 010.5| 1
6| Handle Frame| Assembly| 1| 20| Button Head Bolt| M8X16| 4
7| Saddle Adjustment Frame| Assembly| 1| 21| Spring Washer| 08.5| 4
8| Saddle| Assembly| 1| 22| Signal Wire-2| Assembly| 1
9| Monitor| Oval| 1| 23| Open Spanner| M13 M15| 1
10| Monitor Holder| Assembly| 1| 24| Allen Wrench| 6mm| 1
11| Signal Wire-1| Assembly| 1| 25| iPad Rack| | 1
12| Right Pedal| R| 1| 26| Water Bo Cage the| | 1
13| Left Pedal| L| 1| | 27| Pulse Wire| Assembly| 1
14| Adjusting Knob| M16| 2| | *| Ab Mat Sit Ups Strap| | 1
For other assembly problems or missing items, please either call us at (985)
690-0828 or write to us at
customerservice@kathysuniverse.com
Please including your order id, model number of the spin bike and a picture &
video of the problem. We will respond to you within 12 hours.
Scan the QR code here for assembly video instructions.
ASSEMBLY INSTRUCTIONS
STEP 1
The Front Stabilizer (2) is fixed on the Main Body (1) with Carriage Bolts
(16), Flat Washers (17) and Cover Nuts (18) and fixed with Open Spanner (23).
Note: the caster wheels of the Front Stabilizer (2) are at the front, as
shown in the picture.
Similarly, the Rear Stabilizer (3) is fixed on the Main Body (1) with Carriage
Bolts (16), Flat Washers (17) and Cover Nuts (18) and fixed with Open Spanner
(23).
STEP 2
Install the right pedal (12) with R mark on The Main Body (1) and tighten with
Open Spanner (23).
Note: tighten it in a clockwise manner.
Similarly, Install the left pedal (13) with L mark on the Main Body (1) and
tighten with Open Spanner (23).
Note: tighten this in a COUNTERCLOCKWISE manner.
STEP 3
Screw on the Adjusting Knob (14) and insert the Saddle Post (4) into the Main
Body (1). When the Adjusting Knob (14) is pulled, you can adjust the height of
the saddle by inserting it into the corresponding hole of the Saddle Post (4).
Similarly, the Handle Post (5) is inserted into the Main Body (1), and when
the Adjusting Knob (14) is pulled, you can adjust the height of the handles by
inserting it into the corresponding hole of the Handle Post (5). The Adjusting
Knobs (14) are installed in front and back of the Main Body (1) respectively.
Note: no tightening is required at this time.
STEP 4
The Saddle Adjustment Frame (7) is installed on the Saddle Post (4) and is
fixed with a Flat Washer (19) and an Adjusting Knob (15).
Note: loosen the Adjusting Knob (15) to adjust the position of the Saddle
Adjustment Frame (7) back and forth to the optimum position. The Adjusting
Knob (15) needs to be tightened before using the bike.
STEP 5
The Handle Frame (6) is fixed on the Handle Post (5) with the Spring Washer (21) and the Button Head Bolt (20) and tightened with the Allen Wrench (24).
STEP 6
Install the Monitor Holder (10) on the Handle Frame (6) and then tighten the
screw on the lower part of the holder with the Allen wrench. Slide the monitor
(9) on in the direction of the upper opening of the holder. Finally, connect
the Signal Wire-1 (11) with the Signal Wire-2 (22) and Pulse Wire (27) to its
corresponding socket on the back of the monitor (9).
Install the iPad Rack (25) onto the middle of the Handle Frame (6) and simply
clip it on.
Caution: before using, please reconfirm that each part is tightened and
firm, and the machine is stable on the floor.
MONITOR FUNCTIONS
Battery installation
Insert two 1.5V, AAA batteries in the battery compartment on the back of the
monitor (after battery replacements, all values will default to “0”)
Functional description
-
SCAN automatic scanning: open the screen or press the button to enter the SCAN state, all the functions of the TIME – SPD – DIST – CAL – PULSE will be automatically displayed in turn on the main screen.
-
TIME in minutes: cumulative calculation of movement time from 00:00-99:59.
-
Speed (SPD) in mph: current speed of the user, the value of 0.0-999.9 mile / hour.
-
Distance (DIST) in miles: cumulative calculation of movement distance from 0.0-999.9.
-
Calories (CAL): cumulative consumption of calories from 0.0-9999.
-
Pulse (PUL in ppm): instant heart rate, 40-240 pulses / minute.
Note: CAL & PULSE data is only approximate and cannot be used for medical purposes. -
The user can press the MODE button to select each one of these functions individually without being on a rotational basis.
-
Reset: hold down the RESET button for about 3 seconds, all the values will be reset to “0”.
Attention
- If monitor is not working, check the polarity of the batteries, re install if necessary, noting battery “+” “-” signs.
- Battery specification: two 1.5V, AAA batteries.
- Please dispose used batteries responsibly.
BLUETOOTH & SIT UPS FUNCTIONS
Bluetooth Function
Use the Bluetooth function to connect your devices to sports apps such as
FitShow, Kinomap and Zwift. Download these apps from your respective app
stores for your devices. They are available from both Apple & Google Play
Stores.
Ensure the monitor is switched on. Turn on Bluetooth on your device and search
for “KSU1101” to connect with the app.
| FitShow
is an App developed for indoor and outdoor exercise enthusiasts.
Indoor fitness devices are connected via Bluetooth with treadmills, exercise
bikes, steppers, elliptical machines and other fitness equipment, to achieve
access to maps, programs, goals, etc.
---|---
| Kinomap
is an interactive training app for indoor running, cycling and rowing. It is
the world’s largest geolocated video sharing platform, with thousands of
videos from the best tracks around the world. You can use Kinomap for
creating, hosting, sharing user-generated videos such as those of GPS cameras
or common cameras coupled with GPS track from another device.
| Zwift is a massively popular multiplayer online running, cycling and
physical training app that enables users to interact, train, and compete in a
virtual world. All of your core running metrics – including speed, pace and
cadence are displayed in real-time with workouts saved to Zwift. There’re
events you can enter or choose to follow training plans or races nearing on
the horizon.
Sit Ups Function
This spin bike includes an added function to enable sit ups, for a total body
workout. Locate the sit ups strap and an AB (abdominal) mat amongst the Parts
List. Place the sit ups strap directly under the casters wheels as shown in
the picture and adjust the buckle for an optimum fit to accommodate your feet
when you are doing the sit ups. To provide a cushion for your tailbone, place
your buttocks at a suitable distance from the strap as shown in our video
instructions.
Scan the QR code here for video instructions.
For video assembly instructions –
- Please visit https://www.kathysuniverse.com/pages/exercise-bikes
- Or scan the QR code on this page
For joining our product testers community –
- Please visit our website at www.kathysuniverse.com
In case of any problems, please either call us at (985) 690-0828 or write to us at customerservice@kathysuniverse.com , including your order ID & spin bike model number and a photo or a video of the problem, we will respond to you within 12 hours.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>