VEVOR GT1504B Spreader User Manual
- May 15, 2024
- VEVOR
Table of Contents
Technical Support and E-Warranty
Certificatewww.vevor.com/support
SPREADER USER MANUAL
GT1504B Spreader
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major op brands and does not necessarily mean to cover
all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
SPREADER
Model: GT1504B
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
IMPORTANT NOTE:
Do not overload the hopper. Lightweight filters and potting mixers are
recommended.
SPECIFICATIONS
| Model | GT1504B |
|---|---|
| Product Size | 770×530×820mm |
| Color | Black |
COMPONENTS
Installation instructions:
USING YOUR SPREADER
HOW TO USE THE SPREADER TROLLEY
TO OPEN- Push the Control Level forward until it stops against button.
TO CLOSE- Pull the control Lever fully back toward Operator.
Follow the instructions provided by the manufacturer of the spreading
material.
NOTE: Make sure that the spreading material is evenly distributed. The
spreading material must be dry.
- Before feeding in the spreading material, set the dispensing lever to the 0FF position (dispensing flap closed).
- Fill the spreader trolley hopper.
- To adjust the volume of spread, set the dispensing lever to the desired position.
- In order to spread or scatter the material, drive the spreader trolley at an even speed (the higher the speed, the greater the scattering distance).
- Close the dispensing flap as soon as you stop the spreader trolley (dispensing lever in 0FF position).
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD.1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd.Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
SHUNSHUN GmbH
Remeracker 9 Z2021,76351
Linkenheim-Hochstetten, Germany
****Pooledas Group Ltd
Unit 5 Albert Edward House,
The Pavilions Preston, United Kingdom
Made In China
Technical Support and E-Warranty Certificate
www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>