Vuelogic VL-D230DL 18 In 1 USB C Docking Station User Guide

: May 15, 2024
: Vuelogic

Table of Contents

Warranty and Liability
What´s in the box
Product Details
Getting Started
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide

D230DL
QUAD SCREEN DOCK | 18-IN-1 DISPLAYLINK DOCKING STATION
Upgrade Your Workspace
Maximize Productivity

Warranty and Liability

If any fault or damage is detected on your product, please contact your dealer and provide your sales slip or invoice as evidence of the purchase, if necessary. Your dealer will repair the fault either on site, or send the device to PureLink. Please describe all faults
in detail especially intermittent faults which may not be obvious at first inspection. Only with complete information can we be sure to repair all faults in full!

Disclaimer of liability
PureLink GmbH will not be held liable, nor provide any warranty for damage resulting from improper installation, assembly and use of the product, or failure to observe the operating instructions and/or safety instructions.

CE Conformity
**** PureLink GmbH hereby declares that the VLD230DL complies with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the following internet address: http://www.purelink.de

Disposal of the Device
**** WEEE-Reg. No.: DE 93847290
According to the European WEEE directive, any electrical and electronic equipment must not be disposed with consumers waste. As a consumer, you are committed by law to reposit electrical and electronic devices to public collecting points or to the dealer for
free at the end of the device’s lifetime. Details are regulated in the respective national legislations. The garbage can symbol on the product, in the manual or on the packaging refers to these terms. With the return of your used devices you actively take part in protecting the environment.

Trademark
This product complies with the statutory national and European requirements. All company names and product names are trademarks of their respective owners.
All rights reserved.
We reserve our right for misprints and changes of the device, packing or user manual.
HDMI® is a registered trademark of HDMI Licensing Administrator, L.L.C

Learn more at www.purelink.de
Visit our website help.purelink.de for more information about the product and support.

What´s in the box

1x USB-C Multi-function Display Link Docking Station
1x USB-C to USB-C Cable
1x DC 150W power adapter
1x Quick Start Guide

Vuelogic 18-In-1 USB-C Docking Station

Quad Screen DisplayLink Dock
USB-C 3.2 Gen2 with 10Gbps
DisplayLink ready
4K Quad, Dual or Single Display support
Up to Seven Peripheral Devices
100W Power Delivery

Vuelogic VL-D230DL 18 In 1 USB C Docking Station - Fig
1

Product Details

Vuelogic VL-D230DL 18 In 1 USB C Docking Station - Fig
2

Getting Started

Connect the power supply
Use the power adapter supplied with the product and plug it into the DC power port.
Connect with computer
Insert the USB-C cable into the USB-C upstream port on the back of the product and connect to the full-featured USB-C port of the computer.
Press the power switch
Once the power button is pressed, please allow a short amount of time for the device to boot.
Install DisplayLink driver (if required)
Go to DisplayLink official website to download and install Displaylink driver: https://www.displaylink.com/downloads Windows 7~10 operating system :
Display Link software can be installed from Windows update, or download and install the software from Display- Link website, please refer to https://support.displaylink.com/knowledgebase
1. MAC operating systems:
Users must enable this kernel system extension in the Security and Privacy Preferences after installing the driver.
To set this up, please refer to: https://support.displaylink.com/knowledgebase
2. MacOS Catalina 10.15
MacOS 10.15 requires users to allow „screen recording“ in order for DisplayLink devices to work properly.
To set this up, please refer to: https://support.displaylink.com/knowledgebase
Restart the device After the driver installation is complete, restart the device, and you can start using it after a while.