SQUATZ SQAPBENCH Chair Flat Weigh Bench User Manual
- May 15, 2024
- SQUATZ
Table of Contents
SQUATZ SQAPBENCH Chair Flat Weigh Bench
Features
- Endure High-Strength Stretching Exercises and Prevent Injury
- Wide Range of Applications
- Easy to use and Ergonomic Design
- Stable, Reliable and Not Wobble
- Non-Slip Foot Cap
- Heavy-Duty Steel Structure
- Extended & Thickened Cushion
- Great for Full Body Workout like Bench Press, Dumbbell Exercise, etc.
- Angle Adjustable from 94 to 180 Degrees with 5 Levels
- Some Assembly Needed
What’s in the Box:
- (1) Cushion
- (1) Back Cushion
- (1) Limit Group
- (1) Left Pipe
- (1) Right Pipe
- (1) Front Foot Tube
- (1) Rear Foot Tube
- (2) Plug Screw M8 x 4.8
- (4) Round head M8 x 15 Screw
- (8) Round head M8 x 45 Screw
- (1) L6 Allen Wrench
Technical Specs:
- Construction Material: Steel, Leather, Foam
- Weight Capacity: Up to 550lbs.
- Product Dimensions (L x W x H): 50.67’’ x 16.38’’ x 16.97’’ -inches
|
---|---
Installation
Packing List
| No. | Name | Volume |
|---|---|---|
| 1 | Cushion group | 1 |
| 2 | Back cushion group | 1 |
| 3 | Limit group | 1 |
| 4 | Left pipe group | 1 |
| 5 | Right pipe group | 1 |
| 6 | Front foot tube group | 1 |
| 7 | Rear foot tube group | 1 |
| 8 | Plug screw M8 * 4.8 | 2 |
| 9 | Round head M8 * 15 screw | 4 |
| 10 | Round head M8 * 45 screw | 8 |
| 11 | L6 Allen wrench | 1 |
Installation Diagram
Installation Steps
-
Take out the cardboard box, place it on the floor. Put the cushion group 1 and the back the cushion group 2 shall be placed flatly, and the parts package 8, 9, 10 screws and 11 wrenches shall be taken out.
-
Use two half round head screws 10 and a plug screw 8 to pass through the flexing plate of the right pipe group 5 respectively, and flx the right pipe group 5 on the cushion group 1 and the back cushion group 2 (pay attention not to lock the screws completely).
-
Use two round head screws 9 to pass through the flexing plate of the right pipe group 5 respectively, and flx the limit group 3 on the right pipe group 5 (note that the reverse tooth direction of the limit group 3 is consistent with the figure, and the screws shall not be locked completely).
-
Use two round head screws 10, one plug screw 8 and two round head screws 9 to pass through the flexing plate of the left pipe group 4 respectively, and flx the left pipe group 4 with the cushion group 1, back cushion group 2 and limit group 3 (pay attention not to lock the screws completely)
-
Fix the front foot tube group 6 and the rear foot tube group 7 on the left and right tube groups 4 and 5 respectively with four round head screws 10 (pay attention not to lock the screws completely).
-
Lock the above mounting screws 8, 9, 10 in turn with a hexagonal wrench 11 to complete the installation. If the four feet are uneven, the adjustable foot pad in the front foot tube group can be adjusted.
Customer Support
Questions? Comments?
We are here to help!
contact@squatz.com
