SAMSUNG IW008J Simple Wall LED Cabinet User Guide

SAMSUNG IW008J Simple Wall LED Cabinet

Specifications

• Model Numbers: IW008J, IW012J, IW016J
• Power Input: 100-240V 50/60Hz 4.0A
• Service Ports: DATA IN, DATA OUT, POWER IN, POWER OUT
• Caution: Metal objects may adhere to the front surface of the cabinet due to magnetism
• Support: Contact vendor for missing components

Product Usage Instructions

Handling and Installation

1.  Remove the safety bracket before proceeding to installation.
2. Avoid exposing the product to external shocks or vibrations.
3. Do not place the product on the floor with the LED facing down.

Maintenance and Care

1. If any metal object adheres to the cabinet, use a magnet or airgun to remove it carefully.
2. Avoid holding magnetic stripe cards close to prevent interference from magnetism.

Power Requirements

1.  Connect a maximum of three cabinets for 110V power and four cabinets for 220V power to prevent overvoltage.
2. Do not exceed the recommended maximum number of devices connected to prevent damage.

FAQ

1. Q: What should I do if metal objects adhere to the cabinet?
   A: Use a magnet or airgun to carefully remove the metal object to avoid damaging the product.

2. Q: How many cabinets can be connected based on power input?
   A: Connect up to three cabinets for 110V power and four cabinets for 220V power to prevent overvoltage issues.

Simple User Guide
IW008J IW012J IW016J

• The color and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance.
• Download the user manual from the website for further details.
• http://www.samsung.com/displaysolutions

Open Source Announcement To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.request@samsung.com).

Checking the Components

Contact the vendor where you purchased the product if any components are missing. Components may differ in different locations.

• Simple User Guide
• Regulatory guide
• Power extension cable
• Screw (M4 x L6)
• Warranty card (Not available in some locations)
• Power cord
• OCM cable
• Cleaning cloth

Ports

1. Dedicated to service technicians.
2. Connects to the DATA OUT port on an interface gender or on the previous cabinet to receive video data.
3. Enters factory mode (press and hold for 5 seconds) or factory reset mode (press and hold for 10 seconds).
4. Specify the monitor mode:
   • MODE 1: Standby mode (STB: Stand-By)
   • MODE 2: Operating mode ( O: Operating)
5. Connects to the DATA IN port on the next cabinet.
6. Connects to an AC power.
7. Connects the power cable to the next cabinet to support AC power.

Precautions when handling the cabinets

• Metal objects may adhere to the front surface of the cabinet due to its magnetism.
• If any metal object adheres, use a magnet or airgun to remove it. Be careful when removing metal objects using a magnet, as the magnet may separate the module from the cabinet.
• Be careful when holding magnetic stripe cards close, as the magnetism may affect those cards. 1 [Caution to prevent external shock and dropping of the product] After removing the protective brackets, be careful not to expose the product to external shocks or vibrations.

Make sure that the product is not dropped from any height.

1. Caution to prevent damage to the LED
2. Be careful not to expose the product to vibrations or external shocks when it is lying flat on the floor. 3 [Caution to prevent damage to corners]
3. Take extra care to ensure that the corners of a cabinet do not get damaged.
4. Caution to prevent damage to the LED
   After removing the protective brackets, do not place the product on the floor with the LED facing down. 5 [Caution to prevent damage to the LED from static] Do not touch the product without anti-static gloves.
   Be sure to wear anti-static gloves when touching the product.

Installing the cabinets

• Make sure you entrust the installation to a professional installation service provider. For further information regarding installation, contact the dealer you purchased the product from.
• Install the cabinet using the frame kit provided by the manufacturer. For more information about how to install the frame kit, refer to the user manual that comes with it.
• Samsung Electronics shall not be liable for any damage to the product and any injury to the users or others that may be incurred while the users install the product by themselves.

Removing the protective brackets
Remove the safety bracket before proceeding to installation.

Connecting the Power Cable

• Connect the power cable after all cables are connected.
• Before connecting external devices, be sure to disconnect the power cable.

Precautions when connecting power

• If using 110V power, a maximum of three cabinets can be connected to the power source. If using 220V power, a maximum of four cabinets can be connected to the power source.
• Exceeding the recommended maximum number of devices may produce overvoltage, causing the circuit breaker to trip down or the product to be damaged. Make sure that the number of connected devices does not exceed the recommended maximum number.
• Samsung Electronics is not liable for any problems incurred by connecting devices that exceed the recommended maximum number.

Specifications

product as the standard voltage can vary in different countries.
Environmental considerations| Operating|

• Temperature: 32 °F – 104 °F (0 °C – 40 °C)
• Humidity: 10% – 80%, non-condensing

Storage|

• Temperature: -4 °F – 113 °F (-20 °C – 45 °C)

• Humidity: 5% – 95%, non-condensing

• This device is a Class B digital apparatus.

•  For detailed device specifications, visit the Samsung Electronics website.

Contact SAMSUNG WORLD WIDE

• Area
  • U.S.A
• Customer Care Center
  • 1-800-SAMSUNG (726-7864)

Warning! Important Safety Instructions

Please read the appropriate section that corresponds to the marking on your Samsung product before at-tempting to install the product.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

• This symbol indicates that high volt-age is present inside. It is dangerous to make any kind of contact with any internal part of this product.
• This symbol indicates that this product has included important literature concerning operation and maintenance.

ꞏ If your equipment uses an AC adapter:

• Only use the AC adapter with your product by Samsung.

• Do not use the power cord with other products.

  •  Do not install this equipment in a confined space such as a case or similar.

  • The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. The slots and openings must never be blocked or covered.

  • The product should be located away from heat sources such as radiators, heat registers, or other products that produce heat.

  • Do not place a water containing vessel (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.
    (Apparatus shall not be exposed to dripping or splashing)

  • The apparatus must be connected to an earthed MAINS socket-outlet (Class l Equipment only). Or Use only a properly grounded plug and receptacle (Class l Equipment only).

  • To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

  • As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by POWER.

  • [ USA ] State of California Proposition 65 Warning

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

References

• P65Warnings.ca.gov
• Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US
• US | Business Solutions, Services and Technology from Samsung

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>