ASUS PRIME H310M-C R2.0 Motherboard User Guide

: June 9, 2024
: Asus

ASUS PRIME H310M-C R2.0 Motherboard

Safety information

Electrical safety

To prevent electrical shock hazards, disconnect the power cable from the electrical outlet before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Operation safety

Before installing the motherboard and adding components, carefully read all the manuals that came with the package.
Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may be exposed to moisture.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service technician or your retailer.

About this guide

This user guide contains the information you need when installing and configuring the motherboard.

How this guide is organized

This guide contains the following parts:

Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new technology it supports. It includes descriptions of the switches, jumpers, and connectors on the motherboard.

Chapter 2: BIOS information

This chapter discusses changing system settings through the BIOS Setup menus. Detailed descriptions for the BIOS parameters are also provided.

Where to find more information

Refer to the following sources for additional information and for product and software updates.

ASUS websites
- The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.
Optional documentation
- Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when completing a task.
CAUTION : Information to prevent damage to the components when completing a task.
IMPORTANT : Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.

Typography

Bold text Indicates a menu or an item to select.
Italics Used to emphasize a word or a phrase.
- Keys enclosed in the less-than and greater-than sign means that you must press the enclosed key.
Example:
means that you must press the Enter or Return key.
- \+ \+ If you must press two or more keys simultaneously, the key names are linked with a plus sign (+).

Package contents

Check your motherboard package for the following items.
Motherboard ASUS PRIME H310M-C R2.0 motherboard
Cables 2 x Serial ATA 6.0 Gb/s cables
Accessories: 1 x ASUS I/O Shield
- 1 x M.2 Screw
Application DVD Support DVD
Documentation User Guide
If any of the above items are damaged or missing, contact your retailer.

PRIME H310M-C R2.0 specifications summary

Chipset	Intel® H310 Chipset

Memory

| 2 x DIMMs, max. 32GB, DDR4 2666 / 2400 / 2133 MHz, non-ECC, un-buffered

memory

Dual-channel memory architecture

Supports Intel® Extreme Memory Profile (XMP)

* The maximum memory frequency supported varies by processor.

** Hyper DIMM support is subject to the physical characteristics of individual CPUs. Please refer to Memory QVL for details.

*** DDR4 2666MHz and higher memory modules will run at max. 2666MHz on Intel ® 8th Gen.

6-core or higher processors.

** Refer to[ www.asus.com](http://www.asus.com/) for the Memory QVL (Qualified Vendors List).**

Expansion slots

| 1 x PCI Express 3.0 / 2.0 x16 slot (at x16 mode) 2 x PCI Express 2.0 x1 slots

1 x PCI slot

CPU

| LGA1151 socket for Intel® 8th Generation Core™ i7 / i5 / i3, Pentium®, and Celeron® processors

Supports Intel® 14nm CPU

Supports Intel® Turbo Boost Technology 2.0*

* The Intel ® Turbo Boost Technology 2.0 support depends on the CPU types.

** Refer to www.asus.com for Intel ® CPU support list.

Graphics

| Integrated graphics processor – Intel® HD Graphics support Multi-VGA out support: DVI-D / D-Sub ports

– Supports DVI-D with maximum resolution of 1920 x 1200 @60Hz

– Supports D-Sub with maximum resolution of 1920 x 1200 @60Hz

Supports Intel® InTru™ 3D/Quick Sync Video/Clear Video HD Technology/Insider™ Maximum shared memory of 1024MB

Storage

| Intel® H310 Chipset:

– 4 x SATA 6.0 Gb/s ports (gray)

– 1 x M.2 socket 3 with M key, type 2260/2280 storage devices support (both SATA* & PCIe x2 mode)

* When a SATA mode M.2 device is installed, the M.2 Socket shares bandwidth with the SATA6G_2 port.

PRIME H310M-C R2.0 specifications summary

LAN	Realtek® 8111H Gigabit LAN supports LANGuard

USB

| Intel® H310 Chipset:

– 4 x USB 3.1 Gen 1 (up to 5Gbps) ports (2 ports at mid-board; 2 ports at back

panel, blue, Type A)

– 6 x USB 2.0/1.1 ports (2 ports at mid-board; 4 ports at back panel)

Audio

| Realtek® ALC887 8-channel High Definition Audio CODEC*

– Supports jack-detection and front panel jack-retasking

* Choose the chassis with HD audio module in the front panel to support an 8-channel audio output.

ASUS

special features

| Bespoke Motherboard Design & Business Motherboard Focused Features :

– ASUS Self- Recovering BIOS: Automatically recovers BIOS update once crash happens

– ASUS Event Log: Records activities of system and provides information in BIOS

– ASUS Commercial BIOS kit: Speeds up BIOS update solution by partial BIOS design

– Anti-Moisture: Against moisture and corrosion — prolonging the life of your motherboard

– 24/7 Reliability: Tested under temperature up to 45°C and humidity up to 80% to ensure handle diverse environment

– Overcurrent Protection: Short circuit prevention, protects your system

Easy Assembly Design :

– Fixed-position&Color-coded Connectors: Enable easy identification and cable-

matching, speeding up the production line

– Box Headers: USB headers are box style, enabling fast connector installation and preventing pin damage

DIGI+VRM

Rear panel I/O ports

| 1 x PS/2 keyboard port (purple) 1 x PS/2 mouse port (green)

2 x USB 3.1 Gen 1 (up to 5Gbps) ports (Type-A, blue) 4 x USB 2.0/1.1 ports

1 x D-Sub port 1 x DVI-D port 1 x COM port

1 x LAN (RJ-45) port

3 x Audio jacks support 8-channel audio output

Internal connectors

| 1 x USB 3.1 Gen 1 (up to 5Gbps) connector supports additional 2 USB 3.1 Gen 1 ports (19-pin)

1 x USB 2.0/1.1 connector supports additional 2 USB 2.0/1.1 ports

1 x M.2 socket 3 with M key, type 2260/2280 storage devices supports (SATA* & PCIe x2 mode)

4 x SATA 6.0Gb/s connectors 1 x 4-pin CPU Fan connector

1 x 4-pin Chassis Fan connector for PWM and DC mode 1 x COM connector

1 x Chassis intrusion connector

1 x Front panel audio connector (AAFP)

PRIME H310M-C R2.0 specifications summary

Internal connectors

| 1 x Speaker connector

1 x 24-pin EATX Power connector 1 x 4-pin ATX 12V Power connector 1 x System panel connector

1 x Clear CMOS jumper (2-pin) 1 x 14-1 pin TPM connector

1 x Paralle connector 1 x LPC debug header

* When a SATA mode M.2 device is installed, the M.2 Socket shares bandwidth with the SATA6G_2 port.

---|---

BIOS features

| 128 Mb Flash ROM, UEFI AMI BIOS, PnP, SM BIOS 3.1, ACPI 6.1, Multi-

language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, Last Modified log, and

ASUS DRAM SPD (Serial Presence Detect) memory information

Manageability| WOL by PME, PXE

Support DVD

| Drivers

ASUS Commercial BIOS Kit ASUS Watchdog Timer

Anti-virus software (OEM version)

OS support| Windows® 10 (64-bit)
Form factor| Micro ATX form factor: 9.6 in. x 7.6 in. (24.4 cm x 19.3 cm)

Specifications are subject to change without notice.

Product introduction

Motherboard overview

Unplug the power cord from the wall socket before touching any component.
Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
Unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage to motherboard components.
Scan the QR code to get the detailed pin definitions.

ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

Correctly orient the ATX power supply plugs into these connectors and push down firmly until the connectors completely fit.
For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12V Specification 2.0 (or a later version) and provides a minimum power of 350 W. Ensure this PSU type has 24-pin and 4-pin power plugs.
We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices or when you intend to install additional devices. The system may become unstable or may not boot up if the power is inadequate.
DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system will not boot up.
If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at
http://support.asus.com/Power-Supply-Calculator/PS- Calculator.aspx?SLanguage=en-us for details.

CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan of maximum 0.5A (6 W) fan power.

Intel® LGA1151 CPU socket

Install Intel® LGA1151 CPU into this surface mount LGA1151 socket, which is designed for 8th Generation Intel® Core™ i7 / i5 / i3, Pentium®, and Celeron® processors.
For more details, refer to Central Processing Unit (CPU).

M.2 socket 3

This socket allows you to install M.2 (NGFF) SSD modules.
This M.2 socket supports M Key and 2260/2280 storage devices.
When a device in SATA mode is installed on the M.2 socket, the SATA_2 port cannot be used.
Due to the Chipset limitation, when an M.2 device is installed in PCIe mode, the socket is set to PCIe 2.0.

DDR4 DIMM slots

Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR4 DIMMs into these DIMM sockets.
For more details, refer to System memory.

USB 3.1 Gen 1 (up to 5Gb/s) connector (20-1 pin U31G1_12)

Connect a USB 3.1 Gen 1 module to this connector for additional USB 3.1 Gen 1 front or rear panel ports. This connector complies with USB 3.1 Gen 1 specifications and provides faster data transfer speeds of up to 5 Gbps, faster charging time for USB-chargeable devices, optimized power efficiency, and backward compatibility with USB 2.0.

Clear RTC RAM (2-pin CLRTC)

This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords.

To erase the RTC RAM:

Turn OFF the computer and unplug the power cord.
Use a metal object such as a screwdriver to short the two pins.
Plug the power cord and turn ON the computer.
Hold down the ~~key during the boot process and enter BIOS setup to re-enter data.~~

If the steps above do not help, remove the onboard battery and short the two pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.

Intel® H310 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4)

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables.

Speaker connector (4-pin SPEAKER)

The 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings.

System panel connector (10-1 pin F_PANEL)

This connector supports several chassis-mounted functions.

USB 2.0 connector (10-1 pin USB914)

Connect a USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This USB connector complies with USB 2.0 specifications and supports up to 480Mbps connection speed.

TPM connector (14-1 pin TPM)

This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity.

LPC Debug header

This header allows connection to a LPC debug card.
Scan the QR code to view the meaning of each debug code.
Debug codes are only available for ASUS LPC debug card.
Contact your region sales representative for LPC debug header ordering.

LPT connector (26-1 pin LPT)

The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT standardizes as IEEE 1284, which is the parallel port interface on IBM PC-compatible computers.

Chassis intrusion header (4-1 pin CHASSIS)

This header is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature.

Serial port connector (10-1 pin COM)

This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.
We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.
If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD Audio]. If you want to connect an AC’97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD Audio].

PCI slot
The PCI slot supports cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications.

PCI Express 2.0 x1 slots

This motherboard has two PCI Express 2.0 x1 slots that support PCI Express x1 network cards, SCSI cards, and other cards that comply with the PCI Express specifications.

PCI Express 3.0/2.0 x16 slot

This motherboard supports one PCI Express 3.0/2.0 x16 graphic card that complies with the PCI Express specifications.

Rear panel connectors

ASUS-PRIME-H310M-C-R2-0-Motherboard-
FIG-6

PS/2 Mouse port (green). This port is for a PS/2 mouse.
USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices. From the top to the bottom, the port numbering is Port7, Port8, Port5, and Port6.
Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices.
Serial port connector (COM). This port connects a modem, or other devices that conform with serial specification.
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.

LAN port LED indications

Activity/Link LED Speed LED

Line In port (light blue). This port connects to the tape, CD, DVD player, or other audio sources.
Line Out port (lime). This port connects to a headphone or a speaker. In the 4.1, 5.1and 7.1-channel configurations, the function of this port becomes Front Speaker Out.
Microphone port (pink). This port connects to a microphone.
Refer to the audio configuration table for the function of the audio ports in 2.1, 4.1, 5.1, or 7.1-channel configuration.

Audio 2.1, 4.1, 5.1, or 7.1-channel configuration

Port

| ****

Headset 2.1-channel

| ****

4.1-channel

| ****

5.1-channel

| ****

7.1-channel

---|---|---|---|---
Light Blue (Rear panel)| Line In| Rear Speaker Out| Rear Speaker Out| Rear Speaker Out
Lime (Rear panel)| Line Out| Front Speaker Out| Front Speaker Out| Front Speaker Out
Pink (Rear panel)| Mic In| Mic In| Bass/Center| Bass/Center
Lime (Front panel)| –| –| –| Side Speaker Out

To configure a 7.1-channel audio output:

Use a chassis with an HD audio module in the front panel to support a 7.1-channel audio output.
USB 3.1 Gen 1 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.1 Gen 1 devices.
USB 3.1 Gen 1 devices can only be used for data storage.
We strongly recommend that you connect USB 3.1 Gen 1 devices to USB 3.1 Gen 1 ports for faster and better performance from your USB 3.1 Gen 1 devices.
Due to the design of the Intel® 300 series chipset, all USB devices connected to the USB 2.0 and USB 3.1 Gen 1 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility.
DVI-D port. This port is for any DVI-D compatible device.
DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with DVI-I.
PS/2 Keyboard port (purple). This port is for a PS/2 keyboard.

Central Processing Unit (CPU)

This motherboard comes with a surface mount LGA1151 socket designed for the 8th Generation Intel® Core™ i7 / Core™ i5 / Core™ i3, Pentium®, and Celeron® processors.
Unplug all power cables before installing the CPU.
Ensure that you install the correct CPU designed for the LGA1151 socket only. DO NOT install a CPU designed for LGA1150, LGA1155 and LGA1156 sockets on the LGA1151 socket.
Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap
is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components.
Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1151 socket.
The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.

Installing the CPU

ASUS-PRIME-H310M-C-R2-0-Motherboard-
FIG-9

Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.

System memory Overview

This motherboard comes with two Double Data Rate 4 (DDR4) Dual Inline Memory Module (DIMM) sockets. The figure illustrates the location of the DDR4 DIMM sockets: ASUS-PRIME-H310M-C-R2-0-Motherboard-FIG-10

You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
Always install DIMMs with the same CAS latency. For optimal compatibility, we recommend that you install memory modules of the same version or date code (D/C) from the same vendor. Check with the retailer to get the correct memory modules.
DDR4 2666MHz and higher memory modules will run at max. 2666MHz on Intel® 8th Generation 6-core or higher processors.
Memory modules with memory frequency higher than 2133 MHz and its corresponding timing or the loaded X.M.P. Profile is not the JEDEC memory standard. The stability and compatibility of these memory modules depend on the CPU’s capabilities and other installed devices.
The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value.
For system stability, use a more efficient memory cooling system to support a full memory load (2 DIMMs).
Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).

Recommended memory configuration

ASUS-PRIME-H310M-C-R2-0-Motherboard-
FIG-11

Installing a DIMM

ASUS-PRIME-H310M-C-R2-0-Motherboard-
FIG-12

To remove a DIMM

BIOS information

Scan the QR code to view the BIOS update guide.

The system will automatically active ASUS Self-Recovering BIOS after reboot from the BIOS update failure.

ASUS Self-Recovering BIOS
ASUS-exclusive BIOS protection technology automatically recovers the system’s BIOS with a verified backup in the event of an update failure, preventing the need to replace or reinstall your hardware.

Ensures safe BIOS updates
Requires no additional software
Provides automatic update failure detection and recovery
Reduces maintenance frequency and costs

BIOS setup program

Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program.

Entering BIOS Setup at startup

To enter BIOS Setup at startup:

Press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines.

Entering BIOS Setup after POST

To enter BIOS Setup after POST:

Press ++ ~~simultaneously.~~
Press the reset button on the system chassis.
Press the power button to turn the system off then back on. Do this option only if you failed to enter BIOS Setup using the first two options.
Using the power button, reset button, or the ++ ~~keys to force reset from a running operating system can cause damage to your data or system. We recommend you always shut down the system properly from the operating system.~~
The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen.
Visit the ASUS website at www.asus.com to download the latest BIOS file for this motherboard.
If the system becomes unstable after changing any BIOS setting, load the default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey F5.
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. See section Motherboard overview for information on how to erase the RTC RAM.

ASUS-PRIME-H310M-C-R2-0-Motherboard-
FIG-14

Event Log

You can access Event Log from the Tool menu. ASUS-PRIME-H310M-C-R2-0
-Motherboard-FIG-15

A built-in event log enables easier troubleshooting by capturing useful system information, including:

Event Category	Description	Event Log
BIOS Updates	Update status, latest version and update time	BIOS updated from

xxxx to xxxx

BIOS update successful

AC Power loss

|

Abnormal power loss events

| AC Power Loss

4S Forced Shutdown

RTC reset| Real-time-clock (RTC) reset time| RTC time reset has occurred
Chassis instrusion| Record of when the chassis has been opened| A chassis intrusion has occurred

Hardware changes

|

Modifications to the CPU,

memory or HDDs

| New CPU Installed

HDD has been changed! Memory has been changed!

BIOS Updates

|

USB current*, CPU temperature, and CPU voltage events

| USB Over Current occurred

CPU Over Heating Error! CPU Over Voltage Error!

Record of when USB Over Current occurs
Record of when CPU temperature rises above 75°C
Record of when CPU Voltage reaches below 0 mV or above 1550mV

Exit menu

The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items.

Load Optimized Defaults

This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select OK to load the default values.

Save Changes & Reset

Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved. When you select this option or if you press , a confirmation window appears. Select OK to save changes and exit.

Discard Changes & Exit

This option allows you to exit the Setup program without saving your changes. When you select this option or if you press , a confirmation window appears. Select OK to discard changes and exit.

Launch EFI Shell from USB drives

This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available USB devices.

Appendix

Notices

FCC Compliance Information

Responsible Party: Asus Computer International
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Phone / Fax No: (510)739-3777 / (510)608-4555
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference,
this device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3(B)/NMB-3(B)

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

Regional notice for California

WARNING

Cancer and Reproductive Harm www.P65Warnings.ca.gov

Google™ License Terms

Copyright© 2018 Google Inc. All Rights Reserved.
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at: http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and limitations under the License
ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either

for free by downloading it from http://support.asus.com/download
or
for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however, you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com , stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).