YUER YF-31 British Sound Marshall Guitar User Manual
- May 15, 2024
- YUER
Table of Contents
YUER YF-31 British Sound Marshall Guitar
Thank you for purchasing this product. Please read the user manual carefully before using
Precautions
- Do not disassemble, repair, or refit the device to avoid damage.
- Do not use or put this device under high temperature, high humidity, or in any place with dirt or violent shaking.
- Do not drop this device or hit it on the hard surface to avoid damage.
- Do not clean this device with any detergent or alcohol to avoid damage.
- Please remove the power cable if this device is not used for a long time.
- Please connect DC9 to this device.
- Please turn off the power and other devices before connecting or disconnecting with this device.
Performance Description
- By adjusting three tone controls and the VOICE and DRIVE controls, you can simulate the sound of different amplifiers:
- ATLANTIS simulates Marshall Amplifier from Blues-style overdrive to Plexi tones.
- SOUTHSIDE simulates Mesa boogie MKII amps to get a natural and focused rock tone.
- ILLUSION simulates the VOX AC30 amp with a classic British rock sound.
- SOULMIND simulates the Fender 57 deluxe amp, from acoustic to overdrive rock tone.
- Low power consumption current supply.
- All aluminum metal shell, lightweight and compact.
- True Bypass switching Design.
Use Description
- OUTPUT: 1/4″ mono output interface, connect other pedals, amps, and other equipment.
- INPUT: 1/4″ mono input interface, connect other pedals, guitars, and other devices.
Knob Description
- LED indicator, the light is on when the device starts to work.
- OUTPUT output interface, 1/4″ mono audio interface, connect other pedals, amplifiers, and other equipment.
- LEVEL knob, adjust the output level.
- LOW knob, adjust the low frequency
- MID knob, adjust the mid-range frequency.
- Power interface: DC9V (external positive and internal negative ).
- VOICE knob, adjust the frequency response, and distortion, with DRIVE adjustment, you can simulate the sound of different amps.
- DRIVE knob, adjust the gain effect.
- INPUT input interface, 1/4″ mono interface, connect other pedals, guitar, and other pieces of equipment.
- Pedal switch, press the stomp switch to start working.
Technical Parameters
- Interface: 1/4″ Mono audio interface
- Attachment: User manual
- Input Impedance: 1MO
- Output Impedance: 1K0
- Power Interface: DC9
- Working current: 5mA
- Size: 108mm (D)x69mm(W)x51 mm(H)
- Weight: 262g
Read User Manual Online (PDF format)
Loading......