HALCYON EX370 1SWBL LED Spot Light User Manual
- June 10, 2024
- HALCYON
Table of Contents
HALCYON EX370 1SWBL LED Spot Light User Manual
- Front cover
- Temperd glass
- Reflector
- Housing
- Back cover
- Bracket
- Colour Temperature: 2700k
- Input Voltage: 24V DC Constant Voltage (wire in parallel)
- Ingress Protection Rating: IP65
- To prevent voltage drop over a circuit total luminaire wattage plus voltage drop over the length of a cable run and cable gauge must be taken into account.
- Always try to use a Constant Voltage Driver double the luminaire circuit wattage.
- Multistrand UV protected flex should be utilised for all exterior 24V DC CV circuits.
- All cable joints must be a resin or IP68 type – NOTE: standard crimps, terminal blocks and PVC tape are not suitable cable joining methods.
- Applicable environment temperature: -20°C …. +40°C
- All installation work must be carried out by a registered electrician.
WIRING DIAGRAM
SPECIFICATIONS
Material Specifications
Housing: 12* Die-casting dark grey powder coated aluminum.
Bracket: T=60 -80um.Adhesion of ISO class 1/ATM class AB
Glass: Powder coated aluminum
LED: Tempered glass.T =Amm
Gasket: COB LED 5W
Power cable : Tooling shaped seal HO5RN-F2)<1.0mm2L=2m(low voltage)
Cable gland: IP-68 PG-9 PVC
Electrical parameters
Item NO| Light source| Reflector| The manufacturer selected lens degree(°)|
Input voltage(v)| Typical oprating current(mA)| Typical consumption(W)|
Typical luminance(lm)| IK rate
---|---|---|---|---|---|---|---|---
EX370 1SWBL| 3×5W COB LED| R5| 40| 24VDC| 82| 18.5| 1516| 08
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>