ZEOOTA 5011295296 2 Coils Qi Wireless Charger Stand with Cooling Fan User Manual
- June 5, 2024
- ZEOOTA
Table of Contents
ZEOOTA 5011295296 2 Coils Fast Wireless Charger User Manual
Thanks for choosing us!
This is a smart phone wireless charger that allows you enjoy the fun of
digital products easily.
Please kindly read the user manual before using and keep it for future
reference.
Connect to Power Adapter
- Connect the power adapter to socket.
- Connect adapter to the USB 2.0 interface, the other Micro USB to pad.
Note: Charging pad controlled by smart chips, long-term standby can be assured.
Connect to Laptop for Charging
- Connect the USB 2.0 interface into laptop USB port, the other Micro USB to pad.
- Standby LED light turn on Blue, The blue indicator light will turn off automatically after 5S, under standby status.
Connect to Desktop for Charging
- Connect the USB 2.0 interface into desktop motherboard USB port, the other Micro USB to pad.
- Standby LED light turn on Blue, The blue indicator light will turn off automatically after 5S, under standby status.
Charging Mode
- Put wireless charging mobile phone on the pad, the LED light will turn to green from blue and start charging. It shows that the charging position is improper when the LED light flashing. Please move the phone a little and LED light keeps green.
Specification
Input: DC5.0V, 2.0A/DC9.0V, 1.8A
Frequency : 110-205KHz
Conversion: ≥72%
Size: 1249770mm
Notes
- Do not squeeze or collisions.
- Do not disassemble or throw into fire or water, to avoid causing a short circuit leakage.
- Do not use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.
- Do not place too close with magnetic stripe or chip card (ID card, bank cards, etc.) to avoid magnetic failure.
- Please keep the distance at least 20cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
- To take care of the children, to ensure that they won’t play the wireless charger as a toy, to avoid unnecessary accidents.
The involved images are sketch maps, the final product as per the material subjects.
Includes: wireless charger, 100 cm power cable, user’s manual.
- No power adapter, if you need, please purchase separately.
FCC Statement
Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the equipment and any other radio device.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.