SecuFirst LCA230 LED Outdoor Light User Guide
- June 4, 2024
- SecuFIRST
Table of Contents
SecuFirst LCA230 LED Outdoor Light
Box Content
Note: To record video kindly use a Class 10 micro SD card of a Maximum of 128GB, not included.
Screw off the cover on the bottom of the light to connect the USB cable to the
camera and an adaptor (excl.) Note, the USB cable is only needed for
installation. Screw on the wifi antenna to the back of the light. DO NOT
Connect an Ethernet cable during installation.
Download app
Download the Secufirst HD Professional Edition app from the google playstore (Android) or Apple store (iOS).
Wi-Fi settings
Go to the Wi-Fi settings of your smartphone or tablet. Connect to a Wi-Fi signal called”HD-0. The password of this Wi-Fi network is 12345678 (Note, this connection has no internet available, this is correct). Note, if this Wi-Fi signal is not being shown, remove the ethernet cable and adaptor and plug in the adaptor again, or reset the camera (See additional information below).
Open the app “Secufirst HD Professional Edition” and tap “Press to add a new system.
Wireless setup
Tap”Wireless setup” and wait for 10 seconds.
Insert 2 new passwords
- Security password (To have a live view).
- Admin password (To change settings of the camera).
Tab “OK” and insert the 2 passwords which contain:
- A) Minimum of 12 characters
- B) At least one capital letter (Example: A).
- C)At least one small letter (Example: a).
- D) At least one digit (Example: 1).
- E) At least one reading sign (Example: ! ).
The new difficult passwords is for your own protection so other unwanted people cannot have access to your camera. Tab the “Save” button.
Select your own WI-Fi network. There will be a displayed 1 network but you can view all networks close to the camera by tab the small arrow on the right side of the displayed network. After you have selected your Wi-Fi network insert your own Wi-Fi password (Note, this is your own Wi-Fi password, not the password you have entered in step 7 above). Tab the “Save” button. Note, The Wi-Fi network “HD-0…” will not be visible again. It’s only during the installation of the camera.
Camera Restart
The IP camera will restart. Please wait about 100 seconds. The screenshot will show “Connected” and you can tap on “Play” to have the live view.
-
A) Make a snapshot of the image you have on your phone.
-
B) Audio unmute/ mute
-
C)Record the live video manually
-
D) Panic Alarm. Press to activate the sirene.
-
E) Talk back via the camera from the smart device. You can speak while holding this button (Push to talk)
-
F) Light always Off (Note, the light function only works when the adaptor is disconnected and light is connected to the 230V directly)
-
G) Light always On (Note, the light function only works when the adaptor is disconnected and light is connected to the 230V directly)
-
H) Light automatic On if there is movement when it’s dark outside.
(Note, the light function only works when the adaptor is disconnected and light is connected to the 230V directly) -
I) Dim function. Movie the circle with your fingers to adjust the light strength. (Note, the light function only works when the adaptor is disconnected and light is connected to the 230V directly)
-
J) Return to the main menu.
Settings in the main menu.
- A) Add a new device. Only needed when you buy another SecuFirst branded item. We have an all-in 1 app for the categories: IP camera, Door Entry, Alarm, Home automation and Lighting.
- B) Edit settings. When you tab on this button then 3 buttons will appear in the screenshot.
- Settings
- Erase the current camera from this app.
- Events to look back at recordings (only if you have inserted a micro SD card into the camera). Tab the “Edit setting”‘button below to remove the 3 buttons in the screenshot.
- C) Reconnect button. If the camera doesn’t show “Connected”, tap this button.
- D) Quad view.
- E) Info button,
Go to the advanced setting tab “Edit settings” and then the “Settings” button
in the screenshot. Please enter your Camera name, for example, Garden camera,
then tab “Save'”. Go to the advanced setting tab “Edit setting” and then the
“Setting” button in the screenshot. Below is the next screen tab on the
button, “Advanced” Insert the second password of step 7 (Admin password). All
the Advanced settings are explained in our big manual.
Your product is now installed
and ready to mount outside Remove the USB cable and screw on the cover. Kindly
follow the installation paper which is also included in the box.
Downloads are available on our website www.secufirst.eu.
- Big manual
- How to install movies
Additional information
Video recording
Insert a micro SD card, maximum 128GB, Class 10 preferably of the brand
SanDisk or Kingston (Not included). Please disconnect the power before you
install the micro SD card. Put the micro SD card in the micro SD card slot
which is located behind the cover at the bottom of the light. Finally, you
need to format the SD card in the advanced settings of the app (FAT32).
Installation 2nd Smart device
Download and install the “Secufirst HD Professional Edition app on your smart
device. Open the app and tap “Press to add new system. Tap “Existing System’.
Enter the camera name (Your own choice), DID code, and password. Tab the
“Save” button, then “Yes” to save the system.
Reset the camera to default.
Screw off the cover at the bottom of the lamp. The camera can be reset to
default settings by holding the paperclip on the reset button for 15 seconds.
You notice the camera is reset when the blue LED starts flashing quickly. The
camera will reboot and after 60 seconds you hear a peeping sound. The reset is
completed.
Reset the device is needed in case of:
- Installation cannot be completed
- Forgot your password
- Change to a new Wi-Fi network in another location.
ALC Electronics B.V.
Dr.Paul Janssenweg 151 5026 RH Tilburg | The Netherlands
www.secufirst.eu|
www.alcelectronics.eu.