SecuFirst CWL401W Surveillance System 7 Touchscreen Monitor Camera User Guide
- June 17, 2024
- SecuFIRST
Table of Contents
Surveillance System
With 7″Touchscreen Monitor
and Camera
Let’s Get Started
INTHE BOX
What You Will Need:
Philips Screwdriver, access to electric outlets for cameras, 2.4GHz Wi-Fi
netwoNetwork name and password.
IMPORTANT! MONITOR MUST BE SETUP FIRST
7″TOUCH SCREEN MONITOR
-
MONITOR Firstly setup the system in your livingroom, to make sure everything is working. Secondly install the monitor and camera on it’s right location.Note, one time setup. The memory will stay in the products, even if the power adapters are disconnect.
(A) Connect the AC/DC adapter to the power input on the side of the Monitor and plug into an electrical outlet.
(B) Screw the Antenna clockwise into the rear side of the monitor. -
MONITOR SETUP
Turn on the screen by pressing and holding the power button for 3 seconds. When the screen is turned on, it will show you firstly the welcome page and the quad view.During first time setup, the language page and wifi settings will pop up automatically.
(A) Select yor language
Select your language by tap on “Language”
When the right language is selected, tap “Next”
(B) Choose your internet connection
No internet: Do not select a Wf network Just tab “Net”
Wired internet:Do not select a Wfi network. Just tab “Next’.
You can insert a wired internet cable in the back of the screen.
Wi-Fi:Tab on yourwifi network, then insert yourwifi password.
Note, it’s our helpdesk problem number 1,that people insert this
(C) Setup time zone
Select your timezone and tap “Done” (D) Live view of the camera.
For the screen, it’s possible to connect 4 cameras.
2x Tap quickly on the small image, to change to full screen for 1 camera
-
CAMERA
(A) Connect the AC/DC adapter to the power input on the wire of the camera and plug into the electrical outlet.
(B) Screw the Antenna clockwise into the rear side of the camera.
(C) The Camera is already paired to the screen in our Factory.
Indoor and Outdoor use
-
CAMERA SET UP
BEFORE MOUNTING THE CAMERAS in their final location, plug them into a power source near the monitor to verify pairing and live viewing is successful.
The power LED will illuminate RED to indicate they are already paired and a live view from each will AUTOMATICALLY APPEAR on the monitor.
(A) Plan where camera will be positioned.
Make sure there is an electric outlet near by in order to connect power cable (up to 3.6M including extension cord) from the camera.
(B) Screw the antennas clockwise into the back of each camera and put into the upright position.
(C) Secure the camera to a stable surface, ceiling or wall using the screws included. See screw hole template provided.
HELPFUL HINTS
• Avoid installing in a location which requires the wireless signal to pass through cement, concrete and metal structures. This will reduce the transmission range.
• Once you position your camera to its desired location, camera must still be within Wi-Fi range of the monitor.
• Optimal motion detection range is 1.8-5.4M
• Avoid direct light source in the view of the camera, including street lights, ceiling or floor lamps.
• Observer HD+ cameras are pre-paired, so they work out of the box with your Observer HD+ Monitor.
• Periodically, clean the lens glass with a soft cloth to clean dust, grime and cobwebs.
(D) Losen all 3 screws on the bracket, (Not total out, just screw lose) then you can adjust the camera angle to you prefferences
Adjust the camera angle, for example :
Downloads available on our website
www.secufirst.eu
- Big manual
- How to install movies
PAIRING ADDITIONAL CAMERAS TO MONITOR
The Wireless Surveillance System supports up to four (4) wireless surveillance cameras. Use the following steps to pair each additional camera.
(A) When pairing add-on cameras, plug into power close to the monitor
before installing to your desired location.
(B) Tap the Monitor touchscreen and select the HOME icon to get to the
Main Menu
(C) Select the CAMERA INFO icon to get to the Camera Pairing Screen with MATCH CODE
(D) Tap PAIR NEW CAMERA and the system will search for the new camera’s Wi-Fi signal and will automatically pair it with the monitor.
(E) The status will change on the next available Camera position from “Not Paired” to “Paired” and a code will appear next to the camera added.
(F) Tap
STOP ADD to complete the process.
(G) Select the BACK button (<) twice to return to the main menu. After
successful pairing, install your new add-on camera to its desired location.
TIPS
When adding cameras, it is recommended to pair camera near your Observer HD+
monitor.
Once paired position your camera to its desired location. Camera must still be
within Wi-Fi range of the monitor.
EXPANDABLE up to 4 cameras
Ask your retailer for accessory cameras compatible with this system.
|
---|---
https://apps.apple.com/ca/app/observer-hd/id1580885189|
https://play.google.com/store/apps/details?id=com.alc.observerhdplus.gcm
SETTING UP REMOTE ACCESS
To view LE, or RECORDED videos, from an Phone, Pad or Android Phone,you must
first connect the system to the Internet through W-Fi or Ethernet
Look to your cameras anywere in the world,by using your lphone or Android
phone or tablet
-
Download the observer Ho+ Free app to your phone or tablet
| https://play.google.com/store/apps/details?id=com.alc.observerhdplus.gcm| https://apps.apple.com/ca/app/observer-hd/id1580885189
---|---|--- -
In proximity of the Observer HD+ Monitor screen, open the app on your phone, or tablet, and select “Add New System” then choose “New System”
-
Choose and enter any name you want for System Name
-
Tap the QR code symbol Scan the QR code label located on the back side of Monitor
-
The system own appear automateay, tap CONFIRM when complete
NOTE: PUSH NOTIFICATIONS are turned on for each installed camera by default When an EVENT occurs that triggers a camera, the system will automatically send a Notification to your mobile device through the App
To turn NOTIFICATIONS ON or Off for any individual camera, go to the Settings Menu in the App, or on the Observer HD-+ Monitor -
Create and input a NEW SECURITY Go to replace the system detaut password for your security and privacy
Select a password you will remember, or write it down and store in a safe place away from your system
-
Tap play icon to go to Live Video
Tap any camera view of the quad view twice quickly, then you will get one big screen
View LNE VIDEO
from anywhere in the world, when connected to Internet
ADDITIONAL SETTINGS
For PLAYBACK of recorded EVENTS, select the Red Line from the timeline in the
middle of 2 yellow arrows framing the play area’ of the recorded EVENT.
Slide the timeline left or right to get to the EVENT you want to play and tap
the PLAYBACK Button You can search for EVENTS on the Calendar view to find
recordings on days where indicated.
When any of your indoor/outdoor HD cameras are tniggered by PIRR
sensor, or SW motion detection, the camera will automatically record an EVENT
to the MicroSD card, which can then be accessed through the mobile APP or the
Observe HD+ Monitor Each recorded EVENT automatically overwrites the oldest
file when the MicroSD card is full (up to 12868)
2-WAY AUDIO
In the APP,Press and hold to talk through the camera speaker
Press to mute or unmute.
Audio wil be unmuted when you press and hold the take icon.
2-WAY AUDIO
On the Observer HD+ Monitor, Tap any camera view of the quad view twice
quickly,and go full screen. Tap one time to find the MICROPHONE icon at the
bottom right comer of the screen.
Press and hold to talk through the speaker on the camera.
If you have questions or need help,
please call Customer Support at:
0031 (0)85 00 80 888
info@secufirst.eu
ALC Electronics B.V.
Ericssonstraat 2
5121 ML Rijen I The Netherlands
Tel: 00318500 80 888
Email: info@secufirst.eu
www.secufirst.eu |
www.alcelectronics.eu
MADE IN CHINA
02023 Distributed by ALC Electronics B.M All nights reserved
Network conditions and environmental factors can aversely altect wireless
signal range. Actual night vision range and image clarity depends on
installation /ocation, viewing area and light reflection / absorption.
Photography and illustration may differ slighty from actual product
NOTE: Do not submerge in water or use monitor near water STRANGULATION
HAZARD: Infants have STRANGLED in power cords.
Keep power cords more than 3 feet away from cribs. When using your equipment,
always follow basic safety precautions to reduce the risk of fire, electric
shock and injury to persons. Illustrations are for reference only. Actual
product specifications may vary
For additional precautions and product information, please see owner’s manual
at www.secufirst.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>