SecuFIRST ALM314S WiFi IP Camera Pan Tilt Zoom Met Alarm System User Guide

: October 27, 2023
: SecuFIRST

Table of Contents

Box Content
Inductions
Additional information
Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SecuFIRST ALM314S WiFi IP Camera Pan Tilt Zoom Met Alarm System User Guide

Box Content

Inductions

Screw on the Wi-Fi antenna to the IP camera.
Connect the power adaptor to the IP camera and a 230V socket. DO NOT connect an Ethernet cable during installation.
Download the Secufirst HD Professional Edition app from the Google Play Store (Android) or Apple Store (iOS).
Go to the Wi-Fi settings of your smartphone or tablet.
Connect to a Wi-Fi signal called “HD-0….….”.
The password of this Wi-Fi network is 12345678 (Note, this
connection has no internet available, this is correct).
Note, if this Wi-Fi signal is not being showed, remove the ethernet cable and adaptor and plugin the adaptor again, or reset the camera (See additional information below).
Open the app Secufirst HD Professional Edition and tap “Press to add new system”.
Tap “Wireless setup” and wait for 10 seconds.
Insert 2 new passwords.
Security password (To have live view).
Admin password (To change settings of the camera). Tab “OK” and insert the 2 passwords which contain:
A) Minimum of 12 characters.
B) At least one capital letter (Example: A).
C) At least one small letter (Example: a).
D) At least one digit (Example: 1).
E) At least one reading sign (Example: ! ). The new difficult passwords is for your own protection so other unwanted people cannot have access to your camera. Tab “Save” button.
Select your own Wi-Fi network.
There will be displayed 1 network but you can view all networks close to the camera by tab the small arrow on the right side of the displayed network.
After you have selected your Wi-Fi network insert your own Wi-Fi password (Note, this is your own Wi-Fi pasword, not the password you have entered in step 7 above). Tab “Save” button.
Note, The Wi-Fi network “HD-0……” will not be visable again. It’s only during the installation of the camera.
The IP camera will restart. Tab “live view” and wait about 100 seconds.
The screenshot will show “Connected” after 100 seconds and you can tab on “Play” to have the live view. In the live video you can swipe the image to move the camera.

A) Make a snapshot of the image you have on your phone.
B) Audio unmute / mute
C) Record the live video manually
D) Pre set options for the angle of the camera.
E) Talk back to the camera from the smartdevice.
You can speak while holding this button (Push to talk).
F) Armed / Disarmed.
Armed => Recordings and push notifications.
Disarmed => No recordings and push notifications.
G) Return to main menu.
When you leave the live view the first time, the app will ask you to save the home position. Press “Save”.

Settings in the main menu.

A) Add a new device. Only needed when you buy another SecuFirst branded item.
We have an all-in 1 app for the categories: IP camera, Door Entry, Alarm, Home automation and Lighting.
B) Edit settings. When you tab on this button then 3 buttons will appear in the screenshot.
Settings
Errase current camera from this app.
Events to look back at recordings (only if you have insert a micro SD card into the camera).
Tab the “Edit setting” button below to remove the 3 buttons in the screenshot.
C) Reconnect button. If the camera doesn’t show “Connected”, tab this button.
D) Info button.
Remove the plastic foil to activate the motion sensor, remote control and door window magnet.
If you want to expand the set with more motion sensors, please check our big manual because they need to set up first.
To go to the advanced setting tab “Edit settings” and then the “Settings” button in the screenshot.Please enter your Camera name, example : Garden camera, then tab “Save”. To go to the advanced setting tab “Edit setting” and then the “Setting” button in the screenshot. Below in the next screen tab on the button “Advanced”. Insert the second password of step 7 (Admin password). All the Advanced settings are explained in our big manual.
Downloads available on our website www.secufirst.eu
Big manual
How to install movies

Additional information

Video recording.
Insert a Mirco SD card, maximum 128GB, XC Class 10 / XC Class 10 UHS1 (Not included).
Please disconnect the power adaptor before you install the micro SD card. Put the Micro SD card in the Micro SD card slot and connect the power adaptor again.
Finally you need to format the SD card in the advanced settings of the app (FAT32).

Installation 2nd Smart device.
Download and install the “Secufirst HD Professional Edition” app on your smart device. Open the app and tap “Press to add new system”.Tap “Excisting System”. Enter camera name (Your own choice), DID code and password. Tab “Save” Button, then “Yes” to save the system.

Reset the camera to default.
The camera can be reset to default settings by holding a paperclip on the reset button for 15 seconds. The reset hole you can find on the back of the camera.
You notice the camera is reset when the LED starts flashing quickly.The camera will reboot and after 20 seconds the camera will turn.

The reset is completed.
Reset the device is needed in case of:

A) Installation cannot be completed
B) Forgot your password
C) Change to a new Wi-Fi network in another location.