Sol-Ark Pytes V5 Degree Luxpower Guide Installation Guide

Sol-Ark Pytes V5 Degree Luxpower Guide

Specifications

• Product Name : ROLV
• Compatibility: Works with ‘,3 6ZLWFK devices
• Features : Supports communication between devices and monitors

Product Usage Instructions

Connecting the Devices

Follow the steps to connect the devices:

1. Connect the ‘,3 6ZLWFK to the monitor using the provided cables.
2. Ensure a secure connection between the monitor and the device.

Powering On the Devices

To power on the devices

1. Use the provided power adapter for the monitor.
2. Turn on both the monitor and the device by pressing the power buttons.

Device Communication

To establish communication between devices:

1. Follow the instructions provided in the user manual for setting up communication.
2. Ensure that both devices are powered on and within range for communication.

FAQ

• Q: How to check the battery status?
  • A : Navigate to the battery information page on the monitor to view specific battery status, including SOC.
• Q: What to do if battery communication fails?
  • A : If battery communication fails, check the connections and try re-establishing communication by following the user manual instructions.

Connect the cables and set the DIP Switch

1. Connect the power cables between the inverter and battery or the Busbars.
   See the Figure 2.1.7.1 to check the position of Luxpower Battery Connectors.

2.  A standard ethernet cable can be used for the communication since
   The Luxpower inverter pin assignment is the same as the Pytes V Series battery.

   • Plug in the battery end into the CAN Port of the Pytes Series battery and plug in the inverter end into the Luxpower BAT COM Port as shown in the Figure  2.1.7.3.

3. Set the battery DIP switch as shown in the Figure 2.1.7.4

Set the inverter

After the battery power cable and communication cable connection, users need to enter Advanced settings and choose Battery type and brand on the inverter LCD. After you choose the right battery protocol, the communication will be built in 1-2 minutes.

STEP 1 : Touch the Setting icon of the screen.

STEP 2: Touch Advanced and turn down a page, then choose 2:Lithium in Battery type.

STEP 3 : Choose Lithium brand. The password is required to select the battery brand. The password is 00000. Pytes battery should choose Lithium_6.

STEP 4: If the battery communicates with the inverter successfully, the battery page will show the specific SOC of the battery. The home page battery icon will turn to green(if communication fails, the battery icon will turn to red).

Monitor System Setup

Users can use a WiFi/ WLAN /4G /2G dongle to monitor their inverter and view the monitoring data on a computer or smartphone remotely.

To view data on the smartphone, please download the APP from the Google Play or Apple APP store. then log in with their user account.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>