coplax PD-CD105 Electric Portable Clothes Dryer User Manual

Dryer User Manual

PD-CD105 Electric Portable Clothes Dryer

This product is intended for household or similar use only.
To prevent misuse, please read this user manual carefully before using the product and keep it in a safe place.

Component Description

Product Specifications

Instructions for Use

Open the bottom cover and remove the internal power cord. Installing the cover:

1. Ensure that the zipper side of the cover is facing the same direction as the control panel of the dryer.
2. Place the coils on the cover into the large ring groove on the plastic component. Apply pressure at the four pressing points on the plastic piece to firmly secure the coils into the groove.

The minimum hanging height for the entire machine should be at least 140CM. Ensure a distance of at least 2cm from the wall.

1. Open and hang the hook, arrange the cover, then unzip it. Place the clothes hanger rod in a vertical position, hang the clothes on the hanger rod, zip up the cover, connect the power supply, and the dryer will enter the working mode.
2. Ensure a 2cm gap between the cover and the wall.

Storage Method

Lay the clothes hanger rod flat and neatly organize the cover and power cord. Place them into the storage space and close the bottom cover.

Operating Instructions

1. Power/Mode: Press the power button to turn on the device.
   The buzzer will sound, and the machine will default to the high mode. The fan and PTC will start working, and the upper right corner light on the display screen will turn red. Press the button again to switch to the low mode, and the middle light on the
   right side of the display screen will turn white. Press it a third time to turn off the machine.

2. Timer: Press the timer button to activate the timer function. The default display shows 1 hour, and you can adjust the set time. Once the time is set, the countdown will begin, for example, 9H-1H-59-58-57… until it reaches 00 and stops working (1H-2H
   3H-4H-5H-6H-7H-8H-9H-off). This cycle repeats. In the timed shutdown state, the machine will automatically turn off after 8 hours, which is the default setting.

Note:

1. In modes without timer settings, the machine will automatically shut down after 8 hours of operation.
2. When shutting down or after the timer countdown completes under normal working conditions, the fan will continue operating for an additional 10 seconds before stopping.

Precautions

1. The working environment of this product must be far away from water sources and hung on objects that are not easily dropped. The main unit must not be exposed to water. Before hanging clothes, ensure that the power plug of this product remains dry. Before connecting the product to the powersupply, ensure that your hands are dry to avoid electric shock accidents.

2. Before turning on the product, make sure there are no foreign objects covering or obstructing the air inlet. If the clothing is a shirt or T-shirt, make sure the collar does not obstruct the upper air inlet.
   Do not use the product in a wardrobe or in an environment with high clothing density to avoid affecting the product’s performance or causing overheating protection and shutdown. After hanging the clothes in a well-ventilated area, you can connect the power supply.
   The product will enter standby mode, and you can then follow the operating instructions.

3. Target garments for drying and care: jackets, shirts, T-shirts, shorts, vests, baby clothes, women’s underwear, panties, socks, and other clothing. (Large textile products such as bedding are not allowed to be hung.)

4. The product should not be exposed to direct sunlight for long periods, as it may accelerate material aging and affect the product’s lifespan.

5. If the power cord is damaged, to avoid danger, it must be replaced by a professional of the same type from the manufacturer, their repair department, or a similar department.

6. If the dryer malfunctions and cannot operate normally, please turn off the dryer immediately and have it inspected and repaired by a professional at the designated service center nearby. Do not disassemble or replace parts without authorization.

7. Cross-functional usage is prohibited. This product is designed for the purpose of fast drying and garment care. Therefore, it cannot replace heaters, hair dryers, purifiers, or other products to avoid causing machine failure.

8. Children (under 8 years old), elderly individuals or patients who have lost the ability to care for themselves should use this appliance under adult supervision to prevent accidents.

9. Warning:
   a)The appliance is only intended for drying laundered textiles.
   b)To avoid overheating, covering the heater is prohibited.
   c)The heater must not be placed directly below a power outlet.
   d)Do not use this heater near a bathtub, showerhead, or swimming pool.

Maintenance and Repair

1. When using this product for the first time, after a long period of non-use, or before drying clothes during the humid season, connect the power supply and activate the heating mode to let the machine operate for approximately 10 minutes to dry out the machine.
2. If water accidentally enters the main part of the machine, quickly unplug the power, gently shake the main unit to allow the water to drain as much as possible, then place the main unit in a well-ventilated and dry area for 24 hours to naturally dry the remaining water.
3. Before using this product, check if there are any blockages such as textiles, lint, dust, etc., at the air outlet and the upper and side air inlets of the main unit. If the air inlet of the main unit is blocked, promptly use a brush or other tool to remove it. If the air outlet is blocked, please remove the obstruction, connect the power supply, and activate the two-level heating mode for 3 minutes to blow out the blockage.
4. When cleaning the exterior stains of the product, use a soft and clean cloth to wipe it clean. If stubborn stains need to be removed, be sure to use a mild and neutral cleaning agent.

Installation Instructions for the Free Buckle

After inserting the front and rear ends of the Free Buckle into the designated position (e.g., on a wardrobe or door panel), twist the wrench to firmly secure it in the desired location. Once the Free Buckle is securely fastened, you can place the object on the end hook.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>