Coplax PD-FW105 Series Graphene Boosted Electric Protable Heating Pad Instruction Manual

June 16, 2024
Coplax

FOOT SPACE HEATER

PD-FW105 Series Graphene Boosted Electric Protable Heating Pad

Coplax PD-FW105 Series Graphene Boosted Electric Protable Heating
Pad

Thank you for using the electric heater produced by our company. In order to ensure your convenience, please carefully read the manual before use and keep it properly for future reference,

Product Details

  1. Fouregear temperature regulation;
  2. Multiple temperature protection=Safer,
  3. High quality graphene heating film-Energy efficient;
  4. Indicator light display after power on,

Product structure diagram

Coplax PD-FW105 Series Graphene Boosted Electric Protable Heating Pad -
overview 1

  1. Upper Heating Film
  2. Upper Cover Handle
  3. Power Cable
  4. Heating Film
  5. Gear Control Key
  6. Power Switch

Note: if the product picture is slightly inconsistent with the real object, the real object shall prevail!

How to use the product

Heating function:

  1. Place the machine in a suitable place,

  2. Take the machine out of the package, check whether all parts are complete and intact before use, and select the appropriate use mode, Pull the handle of the upper cover and open the upper cover for better heating effect!
    Coplax PD-FW105 Series Graphene Boosted Electric Protable Heating Pad -
overview 2 (Warning: the product is a heater. Please use it correctly according to places stipulated in the manual. Improper use may lead to safety accidents. )

  3. Then insert the power plug into the standard socket with AC 110V and current above 10A. After the plug is inserted, turn on the side power switch, all the machine indicators flash once, and the machine is in  standby ( 1 0n 0 off)Coplax PD-FW105 Series Graphene Boosted Electric Protable Heating Pad - overview 3

  4. Gear operation: press the “power / function” button to enter the first gear working mode, press again to enter the second gear working mode, press 5 times to enter the standby mode, and so on.

Coplax PD-FW105 Series Graphene Boosted Electric Protable Heating Pad -
overview 4

Gear Rated Power Temperature Indicator display
first gear 160W 45±5°C Gear 1 indicator light on
second gear 160W 55±5°C Gear 1 and 2 indicator light on
third gear 160W 65±5°C Gear 1 and 2 and 3 indicator light on
fourth gear 160W 75+5°C Gear 1 and 2 and 3 and four indicator light on
  1. Working sequence of power supply / function: gear 1 gear 2 gear 3 gear 4 —* standby gear 1, cycle in turn.
  2. function will be cancelled. After continuous use for 4 hours, it will automatically enter the standby mode. It is necessary to press the “power / function” button again for use.
  3. The above temperature range is for reference only. It will deviate due to the influence of test environment and test methods. The actual temperature shall prevail.
  4. Protection alarm: when the temperature sensor is short circuited or disconnected, the indicator flashes once a second to prompt that the product stops working: When the sensor is normal, if it cannot be heated within 5min, the same alarm will be given.

Parameters

Model name: PD-FW105
Rated Power: 160W
Rated power supply: 220V-50Hz
Product size: 421x305x213mm
Executive standard: UL1278

Electric diagram

This drawing is for reference only and is subject to update without notice. The material object shall prevail, and the final interpretation right belongs to the Producer.Coplax PD-FW105 Series Graphene Boosted Electric Protable
Heating Pad - overview 5

Important Items

  1. Please read the product manual carefully before using the product.
  2. When the product is used, it must be placed on a horizontal plane stably,Tilting or dumping is strictly prohibited.
  3. When the product is used, the power supply voltage must be consistent with the rated power of the product.;:If the voltage is inconsistent, please contact the dealer and do not use the product.
  4. Do not use the machine anywhere within 30cm of the wall, otherwise it will affect the normal use and  cause the protector to disconnect and stop working.
  5. Please do not cover the machine with towels and other objects that are easy to cause spontaneous combustion, and use the machine away from objects that are easy to cause spontaneous combustion, otherwise it is easy to cause fire accidents.
  6. Please do not put the electric heater directly on the wooden floor to avoid the deformation and damage of the wooden floor.
  7. When the machine is working, do not move it at will to avoid electric shock.
  8. When the machine is not used for a long time, please cut off the power supply and unplug the power.
  9. If the electric heater needs to be moved and cleaned, it must first be turned off and unplugged.
  10. When the machine is working, do not touch the hot part of the body with your hand to avoid scalding.
  11. When the machine is working, do not extend hard objects from the grid into the machine to avoid failure or danger,
  12. Do not disassemble body components at will.

Safety cautions

  1. Please do not pull out the plug with wet hands to avoid electric shock.
  2. Do not touch the heating film with sharp objects to avoid damage to the machine.
  3. Non professional personnel shall not break down the machine at will to avoid electric shock accidents.
  4. The power cord shall not be scratched, damaged or knotted, nor shall it be pressed with heavy objects or clamped, processed, or put the product near the heat source body or on the hot surface, otherwise it may cause electric shock, short circuit and fire.
  5. If the power cord is damaged, it must be replaced by the manufacturer or its maintenance department or similar professional maintenance department or full-time personnel in order to avoid danger.
  6. This machine is only for indoor use. Do not use this appliance around bathtubs, sprinklers or swimming pools.
  7. Do not let children or people who do not take care of themselves operate the machine.
  8. Warning: to avoid overheating, do not cover the heater.
  9. The appliance shall not be used directly under the power socket; It shall be used at a distance of 50cm away from combustibles to avoid fire hazard.

Trouble shoot

Fault Cause analysis Trouble shooting
The indicator light does not work 1. The power cord plug is not connected

properly;
2.The power line is damaged;
3.The thermal protector is disconnected when heated;| 1.Check the power plug and connect it properly;
2.Send to the maintenance point for maintenance;
3.It can continue to be used after the thermal protector is cooled and reset;
The power indicator is not on and can
work normally| 4.The indicator light is broken;| Send to the maintenance point for maintenance
The power indicator is on without heating| 5.The heating film terminal is in poor contact,| Send to the maintenance point for maintenance

The above are common fault diagnosis and troubleshooting methods;For other faults, please contact our customer service or directly send them to our maintenance point for repair;Do not disassemble them by yourself.

Service Guarantee

  • Each electric heater can enjoy up to one year of quality problem replacement service.
  • If you encounter problems in use,please contact our after-sales service personnel.

Clean and maintenance

  1. Before cleaning, be sure to cut off the power supply and unplug.
  2. The machine body can be directly wiped with a clean soft wet cloth.
  3. It is not allowed to wash directly in any liquid.

Kind reminders

Thank you for using the electric heater produced by our company. In order to ensure your convenience, please carefully read the manual before use and keep it properly for future reference.

  1. There will be slight peculiar smell when the new product is first used, which will be eliminated after three or four times of normal use.
  2. In order to ensure the normal use and prolong the service life of the product, please operate and use it correctly in strict accordance with the instructions.
  3. In case of any change in technical parameters, the reall object shall prevail, and the final interpretation right belongs to the Producer.
  4. The warranty period shall be in accordance with the national standard(China).
  5. Temperature protection: the electric heater operates normally. If the temperature suddenly rises abnormally, the thermal protector installed in the machine will cut off the power supply of the heating film and the machine stops working. At this time, press the key, the indicator light flashes and enter the standby state. When the temperature drops below the reset temperature, the whole machine will resume heating.
  6. Please cut off the power supply and pull out the power plug when the product is not in use or when people go out and leave.

Authorized by: Coplax AG
Manufacturer: Foshan Panda Electronic Technology Co., Ltd.
Address: No.1, Chuangye Road, Taffodil Design Technology Joint Acceleration Base,
Beijiao Town, Shunde District, Foshan city,Guangdong, China
Place of Origin: Foshan, China
www.coplax.ch

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals