VTA-370B.2 Vinyl Turntable System Instruction Manual

: May 15, 2024
: VTA

Table of Contents

Important Safety Instructions
ACCESSORIES INCLUDED
Product Overview
Setup / Basic Operation
Listening to the FM Radio
Listening to a CD
Listening to an External Audio Device (Bluetooth Mode)
Vinyl Stream (Bluetooth Out Mode)
Listening to an External Audio Device (AUX Mode)
Listening to a Vinyl Record
Listening to a Cassette Tape
Maintenance / Proper Handling
Specifications
Troubleshooting Guide
FCC Statement
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VTA-370B.2 Vinyl Turntable System Instruction Manual

The lightning flash with arrowhead within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION:
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

WARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to laser beam.

Important Safety Instructions

Read these instructions – All the safety and operating instructions should be read before this product is operated.
Keep these instructions–The safety and operating instructions should be retained for future reference.
Heed all warnings–All warnings on the appliance and in the operating instructions should be adhered to.
Follow all instructions – All operating and use instructions should be followed.
Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lighting storms or when unused for long periods of time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user serviceable parts inside. Refer servicing to qualified personnel.
- The exclamation point within and equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.
This equipment is a Class Ⅱ or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
The mains plug is used as disconnect device. The socket-outlet shall be installed near the equipment and shall be easily accessible.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus.
The use of the equipment in moderate climate.
The ventilation should not be impeded by covering the ventilation openings with items such as, newspapers, tablecloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
The symbol with Indicates AC voltage.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

ACCESSORIES INCLUDED

RCA LINE OUT CABLE
INSTRUCTION MANUAL
45 RPM ADAPTOR
TURNTABLE OPERATION SHEET

Product Overview

Front View

POWER: Toggle to turn the unit on or off.
3.5mm AUX IN JACK: Connect your external source to the AUX IN jack.
3.5mm HEADPHONE JACK
STEREO SPEAKERS
DISC TRAY
PLAY/PAUSE : Press to start playback, press again to pause.
( Note: This button only works in CD & Bluetooth mode.)
OPEN/CLOSE : In CD mode, use to open and close the disc tray. ( Note: CD door takes four (4) seconds to open when open/close ( ) is pressed in CD mode.)
STOP : In CD mode, press to stop playback or cancel the program setting.
PAIR/BT OUT: Press to Pair a new Bluetooth device to the unit. Once the device is connected successfully, you can press the PAIR button to disconnect from your external device. For Bluetooth Out, press and hold to connect or disconnect from an external Bluetooth speaker.
NEXT : In CD & Bluetooth mode, press once to skip the current track. In CD mode, press and hold to forward.
REPEAT: Press to select the repeat or shuffle mode.
PREVIOUS TRACK : In CD & Bluetooth mode, press once to return to the beginning of the current track, press again to return to the previous track. In CD mode, press and hold to rewind.
PROG: In stop mode, press to set the program playback.
RADIO TUNER KNOB: In FM mode, turn to tune in a station.
LED DISPLAY
VOLUME KNOB: Turn to adjust volume.
SELECTION KNOB (FM, CD, BT, AUX, PHONO, TAPE): Rotate to select your desire function.
Right side View
CASSETTE FF & EJECT:
Press halfway to fast forward, press all the way to end and eject the tape.
Rear View
LINE OUT jacks
For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA cable into the unit. Insert the opposite end into the amplifier device. Be sure to connect the white plug to the white jack and the red plug to the red jack.
FM Antenna
While tuned to a station in FM mode, extend the wire and reposition to adjust for best reception.
AC Power Cord
Connect the AC plugs into a wall outlet. It is strongly recommended that this product should be operated only from the type of power source indicated on the marking label.

Parts of the Turntable

A. Turntable.
B. Safety Screw (for transport) Before using the unit, turn the screw clockwise using a coin or screwdriver. Important: When you transport the unit, turn the screw counterclockwise to secure the turntable.
C. Speed Selector.
D. Tone Arm holder.
E. Tone Arm. Before use, completely loosen the twist tie on the tone arm and uplift tone arm.
F. Stylus.
G. 45 RPM adaptor.
H. Cue-lever. Use this lever to lift the tone arm.

Setup / Basic Operation

Setup

Remove white protective needle cover by gently pulling towards front of unit.
Remove any packaging materials from the unit.
Connect the AC power cord to a wall outlet.

Note:

You’re strongly recommended that this product should be operated only from the type of power source indicated on the marking label.
To prevent interference, avoid bundling audio signal cables together with the AC power cord.

Basic Operation

Move the POWER toggle to the ON position. The LED light around the radio dial will light up.
Select a play mode by rotating the function knob (FM/CD/BT/AUX/PHONO/TAPE).
Rotate the VOLUME knob to adjust the desired level of sound.

Listening through RCA LINE OUT

For amplifier device listening, first reduce the volume level to minimum. Insert the white and red plugs on the RCA cable into the back of the unit, then insert the opposite end into your amplifier device. Be sure to connect the white plug into the white jack and the red plug into the red jack.

Listening through Earphones/Headphones (not included)
For private listening, first reduce the volume level to minimum. Insert your headphones’ plug into the 3.5mm jack, then adjust the volume up by turning the VOLUME knob.

Note: The speakers will automatically be deactivated while headphones are plugged in.

CONDENSATION WARNING:
When the unit is moved from a cold or warm place, or is used following a sudden temperature change, there is the danger that water vapor in the air may condense on the unit, preventing proper operation. In such cases, leave the unit for 1-2 hours after plugging it into an AC outlet to allow it to stabilize at the temperature of its surroundings.

Listening to the FM Radio

Rotate the Function Knob to select “FM”. The LED Display will display “rad”.
Tune to the desired station using the Radio Tuner Knob.

Listening to a CD

Rotate the Function Knob to select CD. The LED Display will display “Cd–”.
( Note: When no disc is set, “no” will appear on the display.)
Press the OPEN/CLOSE button to open the tray.
Note: – This button only works in CD mode.
- CD door takes four ( ) seconds to open when open/close ( ) is pressed in CD mode.
Place a disc on the tray with the printed label face up.
Press the OPEN/CLOSE button to close the tray.
After that the number of tracks will show on the display and it will begin to playback from the first track automatically.
To temporarily pause playback, press the PLAY/PAUSE button ( ). Press again to resume.
To return to the previous or skip tracks, press the corresponding button ( or ). Pressing once will restart the current track. Pressing twice in succession will return to the beginning of the previous track.
To Fast Forward / Rewind within a track, press and hold down the corresponding skip button until the desired position is reached.
To stop playback, press the STOP button

Important:

Never place more than one disc on the tray.
The disc must be placed in the center of the disc tray. An incorrectly loaded disc can permanently damage the tray door mechanism.
Do not push the CD tray – always use the OPEN/CLOSE button.
It takes a moment for the unit to load a disc, during which all buttons will be temporarily deactivated.

Repeat Playback

Each time the REPEAT button is pressed, the repeat mode will cycle through the following options:

REPEAT ONE(Repeat one track)
The “REPEAT ONE” icon will appear on the display and the current track will be played repeatedly. If you press the ( or ) button to select another track, the track you select will be played repeatedly.

REPEAT ALL (Repeat the entire CD)
The “REPEAT ALL” icon will show on the display and the entire CD will be played repeatedly.

SHUFFLE
The “SHUFFLE” icon will appear on the display. Playing the tracks on a CD mode in a random sequence.

Notes:

Repeat playback works with CD discs only.
Pressing ( ) during shuffle playback will randomly select the next track.
A track cannot be repeated during shuffle playback.
Shuffle playback doesn’t work during programmed playback.

To cancel the REPEAT or SHUFFLE mode, press the REPEAT button repeatedly till the right side icon disappear from the display.

Programmed Playback
Up to 20 tracks can be programmed to play in the desired order.

Notes:

Programmed playback works with CD’s only.

Select “CD” mode, then load a CD.
While the CD is stopped, press the PROGRAM button.
“PROG” indicator lights up and “P01” blinks on the display.
Press ( or ) to select a track number.
Press the PROGRAM button again to set the next program track, “P02” appears and blinks. Repeat steps 4 through 5 to program the additional tracks.
When the selection of track numbers has been finished, press the PLAY button ( ) to start program playback.
(Note: when all 20 program tracks are finalized, press the PROGRAM button once and “FI” will appear on the display)
Press the STOP ( ) button twice to cancel the program mode and then the “PROG” will disappear from the display.

To check the programmed order
In the stop mode, press ( or ) repeatedly to show the track numbers that have been programmed

To add a track to the end of the programmed order: In the stop mode, press the PROGRAM button. Select a track number by pressing ( or ), then press the PROGRAM button. The current track will be added to the end of the program.

Listening to an External Audio Device (Bluetooth Mode)

In Bluetooth mode, this unit can play music from external devices which have a built-in Bluetooth feature.

GETTING CONNECTED USING BLUETOOTH

Rotate to select “BT” function. The LED Display will display “bt”.
The “BT” will be flashing on the display while searching for a device.
On your external device, turn ON the Bluetooth function.
NOTE: The effective distance between your external device and this apparatus is 10 meters (33ft).
Wait a moment for “Victrola Empire” to appear on the devices list. Press “Victrola Empire” to connect to the unit. Sometimes a window will ask you for a password. Fill in “0000” then press “OK” on your external device.
Once the Bluetooth connection is successful the “BT” Indicator will remain lit.
You can press BACK or NEXT button to skip the previous/next track or control on your device.

NOTE:

The PAIR Button allows you to disconnect from your external while remaining in Bluetooth mode. Simply press the PAIR button to disconnect and search for a new device. Follow the pairing directions above to connect to the new device.
Fast Forward / Rewind is only available on your external device.

Vinyl Stream (Bluetooth Out Mode)

In FM, PHONO, CD, AUX, TAPE mode, you can use Bluetooth Out function to play music from the device on an external Bluetooth speaker.

In FM, PHONO, CD, AUX, or TAPE mode, a Bluetooth signal will automatically emit from the unit. “BT” will be flashing on the display.
If you want use an external Bluetooth speaker to play your music, simply turn ON your external Bluetooth speaker, make sure it is in Bluetooth pairing mode, and let it connect to the unit.
NOTE: The effective distance between your external device and this device is 10 meters (33ft).
When the pairing is successful, the device’s internal speakers will turn off and the music will play from your external speaker. “BT” will remain lit on the display.

If you want to disconnect from the external Bluetooth speaker or you don’t want to use the Bluetooth Out mode, press and hold the PAIR / BT OUT button to disconnect from any speakers / turn off transmitter.
If you are having trouble pairing with an external speaker, move the speaker closer to this unit. If pairing is still not successful, please turn OFF both units and try again.

Listening to an External Audio Device (AUX Mode)

Rotate to select “AUX” function. The LED Display will display “AUX”. In AUX (auxiliary) mode, this unit can play audio from an external device (MP3 Player, Portable CD Player, etc.)

There is an AUX IN jack on the front of the unit. When connecting a device that has a headphone jack, use a 3.5mm cable on both ends to connect the external device with the apparatus.

Plug one end of the 3.5mm cable (not included) into the AUX IN jack.
Plug the other end of the cable into the headphone jack of the external device.

NOTE: All operations are only available on your external device.

Listening to a Vinyl Record

Rotate to select “PHONO” function. The LED Display will display “PHON”.
Gently open the top cover.
Note: Be careful not to pinch your finger when opening/closing the top cover.
Place a vinyl record on the turntable. When playing a 45 RPM record, use the included adaptor.
Select the appropriate speed.
Remove the tone arm rest holder to release the tone arm.
Gently raise the arm by using the tone arm lever. Move the tone arm to the edge of the record (or the starting point of a track) and lower the arm onto the record using the tone arm lever. The turntable will begin to turn.
When the record reaches its end, tone arm will stop at the center of the record and you must lift and return the tone arm to the tone arm rest manually. Lock the tone arm in the rest holder to protect the tone arm.

Important:

Closing the top cover will help prevent dust from settling on the turntable.
Always relock the tone arm clip before transporting the unit.
Do not place anything on top of the turntable cover, especially while playing a record.

Listening to a Cassette Tape

Rotate to select “TAPE” function. The LED Display will display “TAPE”. Load an audio cassette tape into the unit (located on the right side of the unit). Playback will automatically begin.
Press button halfway to Fast Forward the tape. Press button lightly and playback will resume.
Press button completely down to end playback and eject tape.

Maintenance / Proper Handling

Compact Disc Handling

Always place the disc on the disc tray with the label side facing upward (compact discs can be played/recorded only on one side)
To remove a disc from its storage case, press down on the center of the case and lift the disc upward, holding it carefully by its edges.
To clean a disc, wipe the surface from the center hole outward towards the outer edge with a soft, dry cloth.
Never use such chemicals as record spray, antistatic sprays or fluid, benzine or thinner to clean discs; they will irreparably damage the disc’s plastic surface.
Discs should be returned to their cases after use to protect from dust and scratches.
Do not expose discs to direct sunlight, high humidity, or high temperature for extended periods of time.
Printable CD-R and CD-RW discs are not recommended, as the label side may become sticky and damage the unit.
Use a soft oil-based felt-tipped pen to write information on the label side. Never use a ball-point or hard-tipped pen, as doing so may damage the recorded side.
Do not use irregularly-shaped CDs (octagonal, heart shaped, business card size, etc), as they will damage the unit.
Read all precautions supplied with any CD-R or CD-RW disc
Never handle a disc with dirty fingers.
Never insert a disc that has a crack on the surface.

Handling Vinyl Records

Do not touch the record’s grooves. Only handle records by the edges or the label with clean hands. Touching the record surface will cause your record’s quality to deteriorate.
To clean a record, use a soft anti-static cloth to gently wipe the record surface.
Keep records in their protective sleeves when not in use.
Always store records upright on their edges
Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.), or in a location subject to vibration, excessive dust, heat, cold or moisture.

General Care

When removing the power plug from the wall outlet, always pull directly on the plug. Never pull the cord.
To keep the laser pickup clean, do not touch it, and do not forget to close the disc tray.
Do not attempt to clean the unit with chemical solvents as this might damage the finish.
For cleaning, only use a clean, dry cloth.
In order to shut off the power to this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time.

How to Replace the Turntable Stylus(Replacement Needle # ITNP-LC1)

The stylus should last about 50 hours under normal use. However, it is recommended that the stylus be replaced as soon as you notice a change in sound quality. Prolonged use of a worn-out stylus may damage the record. The highest speed of 78 RPM records would wear out the stylus more quickly

Removing the old stylus:

Set a screwdriver at the tip of the stylus and push downward (A).
Remove the stylus by pulling it simultaneously downward and forward.

Installing a new stylus:

Hold the front tip of the stylus and insert its rear edge (B) first.
Push the stylus upwards (C) until the tip locks into place.

Caution:

Do not bend the stylus.
Do not touch the needle to avoid injury your hand.
Turn off the unit’s power before you replace the stylus.
Keep out of reach of children.

Specifications

GENERAL

Power Requirements: AC 100-240V~50/60Hz
Power Consumption: 40W
Dimensions (W x H x D): 18.9in x 15 in x 7.87 in (approx.) 480mm x 380mm x 200mm (approx.)
Weight: 17.64 lbs (approx.) 8.0 kg (approx.)

AMPLIFIER

Output Power: 5 W + 5 W
Frequency Response: 60 to 20,000 Hz

SPEAKER SYSTEM

Type: 2-way
Impedance: 3.6 ohms
Input Power: Max.8W

FM RADIO

Range: 88 to 108 MHz

CD PLAYER

Frequency Response: 60 to 20,000 Hz +/-4 dB
Signal-to-Noise Ratio: 55 dB (IEC-A)

CASSETTE PLAYER

Track System: 4 Track, 2 channel stereo
Tape Speed: 4.8 cm/sec
Wow and Flutter: 0.4% (WRMS)
Frequency Response: 125 to 6300Hz +/-6 dB

RECORD PLAYER

Motor: DC servo motor
Drive System: Belt Drive
Speeds: 33-1/3 rpm, 45 rpm and 78 rpm
S/N Ratio: More than 50dB
Cartridge Type: Ceramic Stereo Cartridge
Stylus: ITNP-LC1

BLUETOOTH

Bluetooth Version: Bluetooth V5.0
Bluetooth Profiles: A2DP, AVRCP
Bluetooth Frequency range: 2.402GHz-2.480GHz
Operating Distance: 10 meters

Troubleshooting Guide

GENERAL	Symptom	Possible Cause	Solution

Unit will not power on.

|

Unit is unplugged.

|

Connect the unit to the AC power supply.
No sound output from speakers.

|

The volume level is set too low.
The input selector does not match the playback source.

|

Adjust the volume.
Select the correct input source.
Noise/Distortion in sound output.

|

The unit is too close to a TV set or another interfering device.

|

Turn off the TV or other appliance, and relocate the unit.
Unit fails to respond.

|

It might result from external factors such as ESD (Electro-static discharge).

|

Disconnect the power cord and external audio device. Re-plug the power cord after one minute.

TAPE|

The tape does not play.

|

The cassette tape is not inserted properly.
The tape has reached the end.

|

Insert the cassette tape correctly.
Flip the cassette.

FM RADIO|

Cannot listen to any station, or signal appears weak.

|

The station is not tuned-in properly.
A TV set is being used nearby and is interfering with the radio reception.

|

Properly tune-in the desired station.
Turn-off the interfering TV set.
The sound is distorted.

|

The antenna is not oriented properly.

|

Re-orient the antenna until reception improves

CD PLAYER|

CD stops immediately after starting, or unit pauses or stops during play.

|

The CD is inserted upside down.
The CD is dusty or dirty or there is condensation on the CD.

|

Insert the CD with the printed side right-side up
Carefully clean and dry the CD.
No sound.

|

The CD player is paused.

|

Press the PLAY /PAUSE button.
CD playback is noisy, or playback stops or skips.

|

The CD is scratched, damaged or warped.
The disc is very dirty.

|

Replace CD with an undamaged one.
Carefully clean the CD.
Buttons are not functioning correctly.

|

The unit is processing information (“— Busy” is displayed).
The unit needs to be restarted.

|

Wait until the unit finishes processing.
Turn the unit off, then on again.

PHONO|

Decline in turntable audio performance.

|

The turntable stylus is worn out.

|

Replace the stylus.

AUX|

No sound output with external audio device plugged into AUX in jack.

|

The unit is not on AUX mode.

|

Ensure the unit is switched to AUX mode.

BLUETOOTH|

No sound.

|

The unit is not switch to Bluetooth mode.
Your device’s and/or the unit’s volume not turn up.
Your device is too far from the unit or there’re some obstacle between your device and the unit.

|

Ensure the unit is switched to BT mode.
Move your Bluetooth device closer to unit.
Turn up the volume on your portable device and/or the unit.
Turn off your Bluetooth device and unit then power them both back on.

---|---|---|---

Sound is garbled.

|

Your device’s and/or the unit’s volume not adjust properly.

|

Turn down the volume on your device/phone and the unit.
Unable to pair with a Bluetooth device.

|

Your device doesn’t have Bluetooth connectivity.
The Bluetooth pairing is not successful.

|

Confirm that your device is Bluetooth compatible.
Re-pair the unit and device again.

Please note: As a result of continual improvements, the design and specifications of this product are subject to change without notice.

Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.

Made in China.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

The device must not be co-located or operating in conjunction with any other antenna or transmitter.

To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.

Warranty

Victrola is a registered trademark of Innovative Technology Electronics, LLC.

United States

Victrola (Innovative Technology Electronics, LLC) warrants to the original retail purchaser that this product will be free from defective materials and workmanship for one (1) year from the date of purchase, subject to the limitations below. This warranty period is not extended if we replace the product.

To obtain a replacement under the terms of this warranty, you must contact the dealer from which it was purchased with your original receipt. If assistance from the dealer from which it was purchased is impossible, you may contact our customer service for warranty assistance at victrola.com/contact. Except as limited below, if the product proves defective in either material or workmanship within one (1) year from the date of purchase, Victrola will replace the product at no charge. If the product model is no longer available and cannot be replaced with an identical model, Victrola will issue a merchandise credit for the purchase price to be redeemed at victrola.com.

Limitations:

This limited warranty does not cover failure of the product arising, in whole or in part, from improper installation, storage, transportation, misuse, abuse, accident, neglect, mishandling, unauthorized repair, modification, or wear from ordinary use or environmental deterioration.
This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
This limited warranty is null and void for products not used in accordance with Victrola’s instructions.
This limited warranty terminates if the original retail purchaser sells o otherwise transfers this product.
This limited warranty is null and void for defects or damage caused by installation or repair performed by any person or entity other than a Victrola authorized installer or dealer.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, jurisdiction to jurisdiction or country to country. All express and implied warranties for the product, including but not limited to any implied warranties of merchantability and fitness for a particular purpose, are limited in time to the term of this warranty. Some states, jurisdictions or countries do not allow the exclusion of certain implied warranties or conditions, or limitations on how long an implied warranty or condition lasts, so this limitation may not apply to you. Victrola’s responsibility for malfunctions and defects in hardware is limited to replacement or repair as set forth in this warranty statement. Victrola does not accept liability for special, punitive, consequential or incidental damages or losses, whether direct or indirect, including without limitation, any liability for third party claims against you for damages or losses or for products not being available for use. The maximum liability for which Victrola may be responsible will be no more than the amount you paid for the product that is the subject of the claim. Some states, jurisdictions or countries do not allow the exclusion or limitation of special, indirect, incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Canada and US Territories
The Warranty on this product shall comply with applicable law when sold to a consumer in Canada or a US Territory. To obtain any applicable warranty service, please contact the dealer from which you purchased the product, or the distributor that supplied the product, with your original receipt. If assistance from the dealer from which it was purchased is impossible, you may contact our customer service for warranty assistance at victrola.com/contact. If this product proves defective in either material or workmanship, Victrola will replace the product at no charge. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, Victrola at its sole option may replace the unit with a current model of equal or greater value.

Outside the U.S, Canada, and US Territories
The Warranty on this product shall comply with applicable law when sold to a consumer outside of the United States, Canada, and US Territories. To obtain any applicable warranty service, please contact the dealer from which you purchased the product, or the distributor that supplied the product, with your original receipt.