Hydra Pen H3 Microneedling Pen User Manual
- May 15, 2024
- Hydra Pen
Table of Contents
User Manual H3
Please read the manual before use
Product description
The device consists of an electric microneedling pen and disposable liquid
containable needle cartridges. This manual will explain how to use each
component in detail. The is used to improve the appearance of the skin and
reduce signs of aging. It is intended to stimulate the skin with micro-needles
for collagen and elastin production. The microchannels created in the
superficial skin by the device also help with the absorption of skin serums.
device
There are 3 different types of needle cartridges designed for the device.
These cartridges can be used for micro-needling treatment and nano-needling
treatment.
Parts name
- Power Interfaceq
- Display Screen
- Power / Speed Button
- Scale point
- Scale adjustment ring
- Retaining ring
- Needle cartridge body
- Upper part of needle Cartridge
- Regulating ring
- Protective Cover
How to operate
Take out needle cartridge from the sterilized packaging. [fig 1]= Hold the needle cartridge body same direction as [fig 2] Put essence into the empty needle cartridge body. Screw the upper part of needle cartridge noto needle cartridge body well. [fig 3]
How to operate
Please choose suitable discharge level according to the consistency of
essence.
-
Align the locating point of protective cover with the scale point of regulating ring. [fig 4]
-
Adjust the flow out of essence by rotating the protective cover. The number aligning with the locating point of protective cover shows the current discharge level of essence.[fig 5] Adjust the regulating ring to level 1 if the essence is thin. Adjust the regulating ring to level 3 if the essence is thick.
-
Remove the protective cover.
Place the needle cartridge to the pen. [fig 6] -
Place the retaining ring to the pen.[fig 7]
Adjustment of needle length
Use suitable needle size according to different treatment areas and skin
problems
Adjust the depth of the needle by turning the scale adjustment ring. The depth
of the needle should be adjusted after starting the pen. The scale number
aligning with the scale point shows the current needle depth. [fig 8]
Speed
display and adjustment
Speed Display
6
Speeds Adjustment
Press and hold the power button for 3 seconds to start or shut down the
device. After starting the device, the speed changes once each time the power
button is pressed.
Introduction for wireless mode
This device is powered by a built-in battery. It can work wirelessly. The
power cable and the adapter are used to charge the device when it is out of
battery.
How to charge the battery
Connect the power cable with adapter to the power interface of device and plug
the adapter into a live AC outlet to charge the device. Charging will be
completed in about 2 hours. The number of speed flashes slowly when the
battery capacity is 10% left .
The pen turn off automatically after the number of speed flashes quickly for 1
minute.
Needle
cartridge introduction
The needle cartridge is disposable.
The needle cartridge is designed for only. Hydra.pen H3 Please sterilize the
needle cartridge with 75% alcohol for a few minutes before use.
Please dispose the used needle cartridge to the trash container. In order to
protect the instrument well, do not invert the pen to prevent the liquid back-
flow.
Specification
Model name : Hydra.pen H3
Adapter Input : 100-240V 50-60HZ Output : 5V 2A
Package Weight : 390 g Size : 16912356 mm
Packing List
| Item | Quantity |
|---|---|
| Hand Piece | 1 pc |
| Manual | 1 pc |
| Adapter | 1 pc |
| Power Cable | 1 pc |
| Needle Cartridge | 2 pcs |
Precaution
| Please be sure to read the instructions before use and follow as described.
---|---
| Do not apply it to the person as following:
1.Who has acute disease or bloody disease over 38°C 2.Who has allergy and
hemophilia
3.Who has melanosis of the face
4.Who has high internal heat
5.Who regularly visits hospital
6.Who takes medicines
7.Who is under 12 years old
| Do not use it on the power other than AC 220V. It may cause fires or
malfunction.
| Do not use it near the place with high temperature, dust or humidity (Near
the humidifier). It may cause malfunction.
| Do not repair, disassemble or alter the controller and the body. It may
cause malfunction.
| Do not touch the device or detach the power cords with wet hands. It may
cause electric shock.
| Do not use the stripped cord or propped cord.
It may cause fires(Be sure to replace it with another).
| Do not use the propped cord which has crack or scares. It may cause scares
on the skin.
| When you don’t use it for a long time, unplug it from the outlet.
| Be sure to have an inspection for test. If any troubles are found, get it
repaired.
| No one other than the operator can touch it. It may cause accidents or
malfunction.
| Alternating current| | Serial No
| Direct current| | Manufacturer
| Date of manufacture| | CE mark
| Attention, consult accompanying documents| | consult instruction for use
Warranty
The warranty period of the device is 12 months. We offer repair service from the purchase date. If any of our product has damages or natural trouble, we provide replacements or repair service. The use of third-party cartridges can cause damage to the device. This could invalidate the warranty.
General maintenance
Make sure to inspect the device and adapter before use.
Ensure the device is turned off when not in use. Wipe its surface with a
disinfecting wipe.
Pay attention to clean areas such as crevices, seams, and areas around where
the needle cartridge attaches to the device.
Keep it away from direct sunlight, high temperature or humidity.
Do not leave the measurement, repair or alter of the device to non-
professional staffs.
When you use the device which has not been used for a long time, Please make
sure to check if it works properly with safety.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>