tp-link C5400X Wireless Router Installation Guide
- June 4, 2024
- tp-link
Table of Contents
tp-link C5400X Wireless Router
Connect Device
By connecting your Internet connection directly to the Ethernet cable instead of the DSLIKcable/satellite modem directly connect the Ethernet cable to the router’s Internet port and Skip to Steps 2, 3 and 5 to complete the connection.
- Connect the antennas. If the antennas are fixed, the next go to my name.
- urn off the modem and if it has a spare battery remove it if any.
- Internet (or WAN) on your modem router Connect to the port with an Ethernet cable.
- Power on the router until it is ready. wait
- Turn on the modem.
Via Web Browser Configure
-
Connect your computer to the router (Wired or Wireless)
Wired: Turn off the Wi-Fly on your computer and your computer to your router’s LAN (1/2/3/4) using an Ethernet cable to the port start.
Wireless: Wirelessly connect your computer to the router connect it. SSID and Wireless Password of the router is on the label. -
In the address part of the web browser http://tplinkwifi.net or http://192.168.0.1 Enter your address. Then log in again. create a password to do it, or most usernames as well as routers Also use admin for the password.
Caution: If the login window is not displayed, please refer to FAQ> Q1 -
Go to the Quick Setup page and to complete the configuration follow the instructions step by step.
Tether App
TP-Link Tether provides an easy, intuitive interface to manage and access your router. It can block unwanted devices, set up Parental Controls, adjust your wireless settings. You can configure and more.
To download the TP-Link lether app from the Apple App Store or Google Play Scan the QR code.
The lether app currently does not support the IL-WR820ON device. Please use your router with a web browser. Configure via http://tplinkwifi.net or http://l192.168.0.1.
FAQ (Frequently Asked Questions)
Q1. What can I do if the login window cannot be displayed?
- If your computer connects with a static or fixed IP address, it will automatically set the network settings to the IP address. change to receive.
- Make sure that http://tplinkwifi.net or http://192.168.0.1 is entered correctly in the web browser. be sure. Alternatively, enter http://192.168.1.1 in the web browser.
- Use another web browser and try again.
- Restart your router and try again.
- Disable and re-enable the network adapter in use.
Q2. What can I do if I cannot access the Internet?
- By connecting the computer directly to the modem via an Ethernet cable, the Internet is properly connected. check if it is working somehow. If it is not working properly, Internet Service Contact your provider.
- Open a web browser, enter http://tplinkwifi.net or http://192.168.0.1 and repeat the Quick Install. you worked
- Restart your router and try again.
- For cable modem users, reboot the modem first. If the problem persists, MAC
- To clone the address, enter the Routenn Web Management page.
Q3. How can I restore the router to its factory default settings?
- With the router powered on, press the Reset button on the router until all LEDs flash briefly. Press and hold until (approximately 10 seconds).
- To reset the router to its factory settings, go to the router’s Web Management page.
Q4. What can I do if I forget my Web Management password?
- Refer to FAQ>S3 to reset the router then we create a syllable to log in again or use admin for both username and password as with most routers. kak
Q5. What can I do if I forget my wifi password?
- If you haven’t changed the default Wireless $password, the wireless password is on the router’s Iran label.
- To learn or reset your password, enter the Web Management page of the router
Attention: To learn more about the router and download the router’s user manual, please https://www.tp-link.com go to the website.
References
- Trying to configure the Router? | TP-Link
- TP-Link Australia - WiFi Networking Equipment for Home & Business
- TP-Link Product Support - Wireless Networking Equipment Support