FLEXISPOT MSESD5B-1 55×28 Inch Electric Standing Desk Instruction Manual
- May 15, 2024
- FLEXISPOT
Table of Contents
FLEXISPOT MSESD5B-1 55×28 Inch Electric Standing Desk
Specifications
- Rated Power Input: 100V-240V
- Max Speed: 20mm/s
- Operating Noise: 55dB
- Max Load: 176 lbs / 80kg
Product Usage Instructions
Step 1: Assembling and Connecting the Desk Legs
- Tools Needed: Drill, Phillips Screwdriver
- Follow the provided instructions for assembling the desk legs.
- Ensure to use the supplied parts and hardware for this step.
Step 2: Attaching the Side Plates and the Transmission Rod
- Tools Needed: Small Allen Wrench 5/64 (2mm)
- Loosen the coupling nut and follow the instructions to attach the side plates and transmission rod.
- Make sure the desk legs are at the same level.
Step 3: Assembling and Attaching the Desktop
- Tools Needed: Large Allen Wrench 3/16 (5mm), Phillips Screwdriver
- Assemble the desktop panels ensuring the screws face up.
- Attach the frame and hooks to the desktop following the instructions provided.
Step 4: Assembling and Attaching the Drawers
- Follow the detailed instructions provided in the manual for assembling and attaching the drawers.
FAQ
Q: What tools are needed for assembling this electric standing desk?
- A: You will need a drill, a Phillips screwdriver, a small Allen wrench 5/64 (2mm), and a large.
- Allen wrench 3/16 (5mm) for different steps of the assembly process.
Q: What is the maximum load capacity of this desk?
- A: The maximum load capacity of this desk is 176 lbs / 80kg.
Q: How do I adjust the height of the desk legs?
- A: The height of the desk legs can be adjusted by turning the transmission rod.
- Clockwise rotation lowers the leg, while anti-clockwise rotation raises it.
- Thank you for choosing this product! We strive to provide you with the best quality products and services in the industry.
- Should you have any issues, please don’t hesitate to contact us at service.wowowo@gmail.com
Specifications
- Height Adjustment Range: 28.3″–46.5″ (72–118cm)
Tools Needed
(not included)
INSTALLATION STEP
Supplied Parts and Hardware for Step 1
Supplied Parts and Hardware for Step 2
Supplied Parts and Hardware for Step 3
Supplied Parts and Hardware for Step 4
Supplied Parts and Hardware for Step 5
Supplied Parts and Hardware for Step 6
Step 1: Assembling and Connecting the Desk Legs
Step 2: Attaching the Side Plates and the Transmission Rod
Loosen the coupling nut.
- Before attaching the transmission rod, measure the heights of the two desk legs to see if they are set at the same level.
- If not, insert the transmission rod into the hole in the left leg.
- Turn the rod to adjust the left leg so it’s level with the right leg.
- Turn the rod clockwise to lower the left leg or anti-clockwise to raise it.
- Ensure the transmission rod is properly inserted into the hole in the left leg.
- Smoothly connect the other end of the rod to the end of the motor drive shaft on the right leg.
- Secure the transmission rod to the motor drive shaft by turning the set screw clockwise.
Step 3: Assembling and Attaching the Desktop
- Assemble the desktop.
- Secure the desktop panels with the connectors.
- Attach the frame and hooks to the desktop.
- Step 4: Assembling and Attaching the Drawers
- Screw the cam bolts into the top panels of the drawers.
- Assemble the back panels and side panels of drawers.
- Attach the top panels of the drawers.
- Secure the drawer top panels with the cam locks and screws. Then cover the cam locks with the caps.
- Attach the drawers to the desktop.
- Screw the cam bolts into the stand-top panel.
- Attach and secure the stand-top panel with cam locks and wood dowel pins.
- Then cover the cam locks with the caps.
- Unfold the fabric drawer.
- Place the board on the bottom of the fabric drawer.
- Attach the drawer knob to the drawer.
- Attach the shelf pins.
- Insert the shelf and fabric drawers.
- Step 5: Attaching the Controller
- Step 6: Connecting the Cables
Using the Controller
Save Current Height Setting
- Short-press the 8 buttons, and the display will flash. Press the 1,2 or 3 buttons to save the current height setting to that button.
Select Height Setting 1
- Press the 1 button, and the desk will move to the height that was previously set for that button.
Select Height Setting 2
- Press the 2 button, and the desk will move to the height that was previously set for that button.
Select Height Setting 3
- Press the 3 button, and the desk will move to the height that was previously set for that button.
Raise the Desk
- Press the button to raise the desk continuously until it reaches the highest position of 46.5″ (118cm) or the button is released.
Lower the Desk
- Press the button to lower the desk continuously until it reaches the lowest position of 28.3″ (72cm) or the button is released.
Settings
Protection Mode Error Codes
Hot| Overheating Protection: When the motor has been working
continuously for 2 minutes, it will stop operating to prevent damage from
overheating. Wait for at least 18 minutes before making any further height
adjustments.
---|---
E10| Sensor Malfunction Warning: The motor safety sensor can’t be
detected. Power off, check the connection between the motor and controller, and
power back on again.
E20| Overloading Warning: Max load exceeded. If raising the desk,
take the things off the desk and try again. If lowering the desk, power off,
take the things off the desk, power back on, and try again.
E02| Operation Status Warning: The desk stops moving if vibration,
impact, or incline is detected. If this detection is incorrect, follow the
reset instructions before continuing use.
E32| Overvoltage Protection: Input voltage too high. If the correct
AC adapter is being used, power off the desk, check the connection between
power and the controller, and power on again.
---|---
E31| Undervoltage Protection: Input voltage too low. If the correct
AC adapter is being used, power off the desk, check the connection between
power and the controller, and power on again.
E60| Unequal Leg Height Warning: Power the desk and check whether
the left and right legs are at the same height. Adjust if necessary by
following the instructions. Power on again.
–| Cable Disconnection Warning: Check motor and controller cable
connections. Normal operation should return once all connectors are properly
connected.
Documents / Resources
|
FLEXISPOT MSESD5B-1 55x28 Inch Electric Standing
Desk
[pdf] Instruction Manual
MSESD5B-1, MSESD5V-1, MSESD5B-1 55x28 Inch Electric Standing Desk, 55x28 Inch
Electric Standing Desk, Electric Standing Desk, Standing Desk, Desk
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>