FLEXISPOT E7CB Electric Height Adjustable Standing Desk Installation Guide
- June 3, 2024
- FLEXISPOT
Table of Contents
- FLEXISPOT E7CB Electric Height Adjustable Standing Desk
- Specifications
- Accessory Package
- Parts Included
- Product Outline
- Product Specification
- Operating Instructions
- Troubleshooting
- Attention
- Recycling and Disposal
- FlexiSpot Limited Warranty
- FlexiSpot Limited Warranty
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FLEXISPOT E7CB Electric Height Adjustable Standing Desk
Specifications
Column Stage | 3 |
---|---|
Max. Weight Capacity | 355 Ibs (161 kg) |
Height Range | 23.6″ – 49.2″ (600 – 1250 mm) |
Width Range | 43.36″ – 74.8″ (1100 – 1900 mm) |
Accessory Package
The figures shown are for reference only. Please contact customer service if there are any accessories or tools missing.
Parts Included
Step 1: Install the Side Brackets
- Attach the side brackets(5)(6) to the ends of the supporting beam (4) using screws(A) as show with the Allen Key(F).
- Step 2 Install the Lifting Columns
- Insert the lifting columns(2) into the ends of the supporting beam (4). Fix the lifting columns using screws(D) with the Allen Key(F).
- Step 3: Install the Feet
- Place the feet(1) on the bottom of the lifting column(2). Fix the feet using screws(C) with Allen Key(F).
- Step 4: Install the Tabletop
- Step 5
- Step 6: Install the Cable Management Tray
- Firstly, rotate the screws (B) incompletely into the supporting beam (4) with Allen Key (F), which means do not tighten them. Next, slide one side of the cable management tray (3) into the screws (B), then the other side. Finally, tighten the screws (B) with Allen Key (F).
Product Outline
Product Specification
Button introduction: There are seven buttons that “▲”, “▼”, “1”, “2”, ” “, ” “, “M”
- “▲”: Adjust the desk upwards
- “▼”: Adjust the desk downwards
- “1”: Position 1, the first height position saved by the user
- “2”: Position 2, second height position saved by the user
- ” “: the display shows “3”, which means the position of the standing height the user saved.
- “ “: the display shows “4”, which means the position of the sitting height the user saved.
- “M”: Height saving button, for height memory function; Child lock: for security
Operating Instructions
- Child lock function:
- a. When the child lock is turned on, the blue indicator light (﹀ and M directly above) lights up.
- b. To open the child lock, you need to press and hold the M button for about 5 seconds.
- c. Only when the child lock is unlocked, all the buttons can work normally.
Height Memory Function:
- a. Press the”▲the ” or “▼” button and adjust the table to the desired height. Press “M” to save the height, and the screen will display “ “; Press “1”, “2” or ” “, ” ” to save the height to the corresponding position 1 2 3, or 4, this time the display screen will show as ” “, ” “, or “ “, or “ “;
b. Press “1”, “2” and ” “, ” “buttons to automatically adjust the height you saved.
USB charging function:
- a. USB output: QC2.0/QC3.0, 5.0v / 9.0v / 12.0v, ±5% Current: 1.0a.
Collision prevention sensitivity adjustment – optional features:
- a. Press and hold the “▲” “▼” button for 5 seconds at the same time to switch the sensitivity. There are four levels (A-3, A-2, A-1, A-0). Each operation will switch the sensitivity into the next level.
- b. The display shows “ “, anti-collision function is off; ” “, low sensitivity; “ ” , medium sensitivity; ” ” , high sensitivity;
- c. During height adjustment, when tabletop comes in contact with another object, it instantly stops and reverses to avoid damage.
- d. Press and hold the “▲” “▼” button for 5 seconds at the same time. If the display does not display the above codes, there is no anti-collision function.
Troubleshooting:
- a. Reset: When the screen shows “ ” or “ “, press the”▼” button until the desk reaches its lowest height and rebounds to stop, it means the reset has been finished.
- b. When it doesn’t work and the screen shows “E01” or “E02”, please retry 18 minutes later.
- c. If the “▼” button doesn’t work, please check the cable connection and then cut off the power for at least 10 seconds. Reconnect to the power and press the “▼” button to start the reset process when it shows the “ ” or ” “.
- d. If all these above processes is inefficient, please contact our customer service.
Troubleshooting
This list is used for checking and solving common faults and errors. Please contact the manufacturer if problem you encounter is not on the list below.
Problem | Solution |
---|
No response when pressing and holding the DOWN button
| 1. Check the cable connection.
2. Contact the distributor or the manufacturer.
No response when pressing the UP button and DOWN button| 1. Check the cable
connection.
2. Contact the distributor or the manufacturer.
Speed of lifting is slow
| 1. Check if the load weighs more than 355 Ibs.
2. Contact the distributor or the manufacturer.
Motor does not work properly| 1. Contact the distributor or the manufacturer.
Can lift but cannot lower down
| 1. Start the reset process.
2. Contact the distributor or the manufacturer.
Worksurface downward sliding
| 1. Check if the load weighs more than 355 Ibs.
2. Contact the distributor or the manufacturer.
Automatically reset a lot
| 1. Check if the load weighs more than 355 Ibs.
2. Contact the distributor or the manufacturer.
Overworked beyond duty cycle: Max 2 min on/18 min off
| 1. Keep the power on and stop working for 18 minutes.
2. Contact the distributor or the manufacturer.
The distance lifted or lowered is not accurate
| 1. Press and hold the “M” and ” ” button for three seconds until you hear
BEEP twice to restore the factory settings.
2. Contact the distributor or the manufacturer.
Attention
- Power supply: AC100V – 240V, frequency 50/60HZ;
- Working environment: 32º – 104º F;
- Before cleaning, you have to unplug the power supply cable. Clean with a slightly damp cloth to wipe away the surface dust. Keep all electrical components away from liquids. Do not damage the connection line and keep the plug in a safe position.
- · Inside the control box, there are electronic components, metal parts, plastic parts, wires and so on.
- They should be disposed in accordance with the local laws and regulations. They cannot be disposed as household waste.
- Before using the product, please make sure the product has been installed correctly.
- Before starting use of the product, please read the instructions to fully understand all the product’s functions and settings.
- Keep children away from electric height-adjustable desks, control units and handsets. Manufacturer is not responsible of any damages that result from children’s unpredictable behaviour.
- Slight noise caused by the multi wedge belt or brake system will not impact the use of this product.
- Do not use corrosive or abrasive materials to clean this product and please dispose of cleaning solutions in an environmentally friendly manner.
- Understand the risks associated with using this product. Children or those with cognitive impairment should not use this product without supervision.
- If the power supply cord is damaged or broken, it must be replaced by the manufacturer or a relevant specialist to avoid any injuries.
- Please operate in a clean and safe environment. For example, do not left around your tools. And always be careful to deal with packaging materials, in order to avoid any kinds of possible danger. Potential chocking risk exists when children play with plastic bags!
- If necessary, retain the original package for future transportation.
Recycling and Disposal
- This product cannot be disposed of as household waste. To prevent damage to the environment, this product should be recycled. Please use the relevant recycling systems available to you or contract the distributor or manufacturer for recycling assistance.
FlexiSpot Limited Warranty
This limited warranty of fered byFlexiSpot covers defects in material or
workmanship in new FlexiSpot products. This warranty extends to the original
purchaser only and is non-transferable. Only consumers purchasing FlexiSpot
products from authorized FlexiSpot retailers or resellers may benefit from our
limited warranty.
What is Covered?
The FlexiSpot limited warranty covers our products against defects in material
or workmanship as follows:
FlexiSpot Height Adjustable Desk Frames
All height adjustable desks purchased on or after April 1, 2022 include a
limited, non-transferable warranty. We hereby cover all FlexiSpot height
adjustable desks for a period of:
15 years: all metal and mechanical parts and components, including motors
and electrical components of FlexiSpot Standing Desk E7, FlexiSpot Standing
Desk E8.
10 years: all metal and mechanical parts and components, including motors
and electrical components of FlexiSpot Standing Desk, E3FlexiSpot Standing
Desk E5.
5 years: all metal and mechanical parts and components, including motors
and electrical components of all other height adjustable desk except for E3,
E5, E7, and E8.
FlexiSpot Sit-Stand Desktop Workstations
All standing desks purchased on or after October 5, 2016 include a 5-year warranty for the frame, medium-fiber desktop and mechanisms.
FlexiSpot Desk Bikes
All desk bikes purchased on or after October 5, 2016 include a 3-year warranty for the frame, and a 1-year warranty for the electronics and other mechanisms.
FlexiSpot Mini Steppers
All desk bikes purchased on or after October 5, 2016 include a 1-year warranty for the frame, and other mechanisms.
Accessories
All monitor mounts purchased on or after October 5, 2016 include a 5-year
warranty for the arms, 3-year warranty for gas spring system and mechanisms.
What are your Remedies?
FlexiSpot will replace at no charge to the consumer the defective parts only
or, at FlexiSpot’s option, replace any product or part of the product that is
defective because of improper workmanship and/or material, under normal
installation, use, service and maintenance. If FlexiSpot is unable to provide
a replacement and repair is not practical or cannot be completed in a timely
fashion, FlexiSpot may elect to refund the purchase price in exchange for the
return of the product. In the rare event that your FlexiSpot product is
defective, we will provide you with a replacement item shipped at no cost to
you within the continental United States. The shipping method for replacement
products is FedEx Ground, but expedited shipping is available if you choose to
pay the additional expense. In addition, you will need to pay the shipping
costs if any products need to be shipped to you at an address outside the
continental United States.
REPAIR OR REPLACEMENT (OR, IN LIMITED CIRCUMSTANCES, REFUND OF THE PURCHASE
PRICE) AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
PURCHASER. FLEXISPOT NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO CREATE FOR
IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH THIS PRODUCT.
FlexiSpot Limited Warranty
What is Not Covered?
Our limited warranty does not cover any problem that is caused by:
- 1. Conditions, malfunctions or damage not resulting from defects in material or workmanship.
2. Conditions, malfunctions or damage resulting from normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration.
3. Accessories, connected materials and products, or related products not manufactured by FlexiSpot.
4. Conditions, malfunctions or damage resulting from failure to follow the instructions and guidelines relating to the product’s intended use.
Our limited warranty is void if a product is returned with removed, damaged or
tampered labels or any alterations (including removal of any component or
external cover).
How to File a Claim?
In order to receive the benefit of our limited warranty, you need to process
your claim in compliance with the terms of this limited warranty and follow
proper return procedure. To request warranty service, please contact customer
service via email at contact@FlexiSpot.com or
toll free at 855-421-2808. You will
need to provide the sales receipt or other evidence of the date and place of
purchase for your FlexiSpot product.
Implied Warranties and Limitation of Damages
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES
(INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE)
SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY, AND FLEXISPOT
SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR REVENUE, RESULTING
FROM ANY BREACH OF EXPRESS OR IMPLIED WARRANTY OR ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. Some jurisdictions do not allow limitations on the duration
of an implied warranty or the exclusion or limitation of special, indirect,
incidental or consequential damages, so the above limitations or exclusions
may not apply to you.
Governing Law
This Warranty shall be governed by the laws of the State of California, USA,
without giving effect to any conflict of laws principles that may provide the
application of the law of another jurisdiction.
How State Law Applies
This Warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>