ICY DOCK MB720M2K-B NVMe SSD PCIe 4.0 Mobile Rack Enclosure Installation Guide

May 15, 2024
ICY DOCk

ICY DOCK MB720M2K-B NVMe SSD PCIe 4.0 Mobile Rack Enclosure

ICY DOCK MB720M2K-B NVMe SSD PCIe 4.0 Mobile Rack Enclosure

Package Contents

  • Device

  • User Manual

  • Drive ID Plugs

  • Thermal Pads

  • Key x2

  • 10 x M3*2.5 Pan Head Screw for Device (2 x Screw for Spare Parts)

Note : Please use the included screws to secure the device

Device Information

Front View
MB720M2K-B / MB720MK-B V3
Front View

Tray Inner View
MB720M2K-B / MB720MK-B V3
Tray Inner View

  1. 2-segment Key Lock
  2. Slot for Drive ID Plug
  3. LED Indicator (Device Power : Solid Green ; Drive Access : Flashing Green )
  4. Adjustable M.2 Locker
  5. M.2 SSD 22110/2280/2260/2242/2230 Lock Points
  6. Heat Sink Secure Points

Rear View

MB720M2K-B
Rear View

MB720MK-B V3
Rear View

  1. 15 Pin Power
  2. 3 Pin Fan Header
  3. Fan Switch
  4. Mini-SAS HO Connector
  5. OCuLink Connector

Installation Guide

Installation Guide

The metal heat sink needs to be removed before M.2 SSD installation. To remove, simply push the heat sink upward from the rear underside of the drive tray.

To prevent incorrect positioning of the M.2 SSD, align the gap on the connector of the M.2 SSD to the drive tray’s slot divider. Then insert the M.2 SSD towards the connector slot.
Divider to prevent incorrect insertion
Installation Guide

With the M.2 SSD laying flat on the tray, slide the adjustable M.2 locker to secure the M.2 SSD.
Installation Guide

Paste the thermal pad onto the heat sink cover after removing the protective film.
Installation Guide

(Optional)
M.2 NVMe SSD (not included)

Remove the protective films and then paste the small piece thermal pads onto the lower component for a complete contact if there is a significant height difference between the components on the M.2 drive.

Place the removed heat sink cover back on.
Press down both sides of the heat sink cover to secure.
Installation Guide

Installation Guide

(Optional) Insert the drive ID plug into the slot, according to your

preference.

Device Installation

Device Installation

  1. Use a small plier to remove the plastic cover on the Mini-SAS HD ports before connecting the cables.
  2. Insert the device into external 5.25″ bay and use the included M3*2.5 screws to secure the device.
  3. Connect the power & Mini-SAS HD / OCulink cables to the device to complete installation.

Customer Suppor0t

Scan the QR code for more product information

MB720M2K-B

Mini-SAS HD SFF-8643 Connector

MB720MK-B V3

OCulink SFF-8612 Connector

Copyright© ICY DOCK International. All Rights Reserved. 650308 VER 1.0


Cremax Europe GmbH UK
Email: support@icydock.com
Weidenweg 21 H, 47059 Duisburg, Germany

Beyond Technologies UK Ltd
Email: info@beyondtech.co.uk
Unit B6, Halesfield 11, Telford, Shropshire.


ICY DOCK reserves the right to change product specifications, components, or accessories without prior notice. For the warranty information, please visit www.icydock.com/warranty. php

Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ICY DOCk User Manuals

Related Manuals