ICY DOCK MB Series EZ-Adapter Instruction Manual
- June 9, 2024
- ICY DOCk
Table of Contents
ICY DOCK MB Series EZ-Adapter Instruction Manual
El-Adapter
USS 3.2 Gen 2 (Type-C) to U.2 NVMe SSD Adapter
USB 3.2 Gen 1 (Type-C) to 2.5″ SATA SSD/HDD & M.2 SATA SSD Adapter
USS 3.2 Gen 2 (Type-C) to 2.5″ SATA SSD/HDD & M.2 NVMe/SATA SSD Adapter
Crema,; Europe GmbH
Weidenweg 21H
47058 Duiburg, Germany
Email: support@icydock.com
Package Contents
Device (MB931U-1VB R1)
Device (MB031 U-1SMB)
Device (MB104U- 1SMB)
|
User Manual
|
USB Type C to A Cable
|
USB Type C to C Cable
|
Power Adopter
---|---|---|---|---
MB931U-1 V8 R1|
✔
|
✔
|
✔
|
✔
MB031U-1SMB|
✔
|
✔
| |
M6104U-1 SMB|
✔
| |
✔
|
Device Information
Inner View
- Power Switch
- LEO lndicator (Device Power: Solid Blue ; Drive Aeoess : Solid Blue)
- U.2 NVMe Connector
- 2.5″ SATA Connector
- M.2 SATA Connee1or
- M.2 NVMe/SATA Connector
Rear View
- DC 12V Power Connector
- USB type C Connector
Installation Guide
MB931U-1VB R1
-
Connect the USB cable and power adapter.
-
Connect U.2 NVMe SSD lo the MB931U- 1VB R1
-
Switch the power button to the 1ight to tum on the device.
Note :
- Make sure to turn off the device’s power before installing or removing the drives.
- Due to compatibility reasons, the transfer speed may drop to 3.2 Gen 1 (SGbps) when using cer1ain U.2 SSOs or operating systems. If you are experiencing any performance issues. please get in touch with our customer support team.
- Please check the drive compatibility lls.t on the ICY DOCK ·website before purchasing a U 2 SSD
MB031U-1SMB
-
Connect the USB cable
-
Connect 2.5″ SATA drive or M.2 SATA SSO to the device Avoid connecting both 2.5″ SATA and M.2 drives simultaneously.
OR
-
Switch the power button to the right to turn on the device.
Note:
- Make sure to tum off the device’s power before installing or removing the drives.
- When installing 2.5″ SATA and M.:2 drives simultaneously, the system will only detect M.2 SSD.
- This device does not support drives that use 12V power
- The drive’s. connector might get oxidized over time and causes poor drive detection. It is recommended to use a rubber eraser or alcohol to clean the connector when it happens.
MB104U-1SMB
-
Connect 2 .5″ SATA drive M.2 SATN/ NVMe SSD to the device. Avoid connecting both 2.5″ SATA and M.2 drives simultaneously.
OR
-
Connect the USB cable.
Note:
- For M.2 NVMe SSO that does not support the hot-plug function, it is suggested to install the M 2 NVMe SSO before connecting the USB cable.
- When installing 2.5″ SATA and M.2 drives simultaneously, the system will only detect 2.5′ drive.
- This device does not suppor1 drives that use 12V power.
- The drive’s connector might get oxidized over time and causes poor delta detection. It is recommended lo u-se a rubber eraser or alcohol to clean the connector when it happens.
ICY DOCK reserves the right to change product specifications, components, or accessories without prior notice. For the warranty information, please visit www.icydock.com/warranty.php
**[www.icydock.com](http://www.icydock.com)**
Documents / Resources
| ICY
DOCK MB Series EZ-
Adapter
[pdf] Instruction Manual
MB Series EZ-Adapter, MB Series, MB Series Adapter, EZ-Adapter, Adapter
---|---