SG Edge 082923 SUV Rear Bench Seat Cover Instruction Manual

082923 SUV Rear Bench Seat Cover

STOP
PLEASE READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION
WARNING! BE SURE TO WEAR SAFETY GLASSES DURING INSTALLATION. The potential for snap back could result in serious personal injury. Always be sure vehicle is off and in park before any installation. Be sure when product is installed that it does not cover or impede with the proper functionality of any of the seat belts.
FOR YOUR CONVENIENCE, OUR INSTALLATION VIDEO IS LOCATED IN THE PRODUCT LISTING PAGE FOR THIS ITEM

BEFORE INSTALLATION

REVIEW THE BENCH SEAT FEATURES LISTED BELOW. IF YOUR BENCH SEAT INCLUDES ANY OF THESE FEATURES, OUR COVER WILL NOT FIT YOUR SEAT.

Bench seats with built-in folding arm rests Bench seats with built-in seat belts 40/20/40 Style bench seats Bench seats with solid base (no access to bottom of seat) Bench seats with sealed back (no access to back of folding seat) Bench seats with latches on side panels

BENCH SEAT TYPES OUR COVER FITS

PLEASE VERIFY YOUR BENCH SEAT TYPE.

| Full SUV
Bench Seat
---|---
| 50/50 Split
SUV Bench Seat
| 40/60 Split
SUV Bench Seat
| 60/40 Split
SUV Bench Seat

CONTENTS

NOTE: As you unbox your new Seat Bench Cover please familiarize yourself with the contents for an easier installation. (2) HEADREST COVERS
(1) TOP SEAT COVER with 2 removable panels (A, B)
NOTE: You will keep or remove panels (A, B) based on the size of your bench seat
(1) BOTTOM SEAT COVE R with 2 removable panels (C, D)
NOTE: You will keep or remove panels (A, B) based on the size of your bench sea (4) BOLSTERS
(attached together for easy shipping)
Bolsters are needed to complete the cover for split seats

FREQUENTLY ASKED QUESTIONS:

Q. How will I know this universal bench cover will fit my vehicle?

A. We recommend before purchasing, review the section above that explains how to identify your bench seat style and how to measure your seat and compare them to your seat measurements to verify they will fit your application.

Q. My bench seat has built-in non-movable headrests molded into the bench seat; will this cover fit?

A. No. Our bench cover is designed to fit bench seats with adjustable headrests

Q. My bench seat has folding seats for people to get in the 3rd row bench area, will this cover fit?

A. Yes. This bench seat cover is specifically designed to accommodate folding access seats. Each section of the bench cover will have its mounting system, making the folding seats separate from each other. You just do one initial install, and you're done.

Q. Does the seat cover, cover the entire Bench Seat?

A. This seat cover will cover the entire top and bottom seating area and all sides to create a custom look, but the back side of the seat will not be covered due to the adjustable mounting strap system.

Q. My seat cover has wrinkles, how do I remove them?

A. After installation, please allow up to two weeks of use for wrinkles to work themselves out. The seat cover will conform to the shape of your seat with use.

Bench seat cover DOES NOT fit bench seats with:
Built in folding arm rests
Bench seats with seat belts built onto top bench seat (see image above for example built-in seat belts) 40/20/40 style seats that are separated from each other (see image above for example of 40/20/40 style seat)

STEP 1. MEASURE YOUR BENCH SEAT!

a. Measure Bench Seat Height and Depth
Top Seat Cover (Height)
Measure from headrest posts to the bottom of the seat. Fits seat heights between 26” and 28”
Bottom Seat Cover (Depth)
Measure from the back of the seat to the front edge of the seat Fits seat depths between 19” and 23”.
b. Use the images below to measure the width of your bench seat type.
Measure Bench Seat Width
Review the images below and determine your bench seat type (Full, 40/60 or 50/50)
Compare your bench seat measurements against the measurements listed

Full Bench Seats without Split or Folding Feature Bench Seats without Split or Folding Feature
Use the measurements below to measure the width of your bench seat. Your bench width size should fall within the sizes listed.
Large Size: 52” – 56”
Mid-Size: 46” – 50”
Small Size: 40” – 44”
Split | Folding Bench Seats Bench Seats with Split or Folding Feature
Use the measurements below to measure the width of your bench seat. Your bench width size should fall within the sizes listed.
Large Size
40/60 Split Bench: 20” – 22” (40 side), 32” – 34” (60 side)
60/40 Split Bench: 32” – 34” (60 side), 20” – 22” (40 side)
Mid Size
40/60 Split Bench: 20” – 22” (40 side), 26” – 28” (60 side)
60/40 Split Bench: 26” – 28” (60 side), 20” – 22” (40 side)
50/50 Bench Seats 50/50 Bench Seats
Use the measurements below to measure the width of your bench seat. Your bench width size should fall within the sizes listed.
50/50 Large Size: 26” – 28” (each side of seat)
50/50 Small Size: 20” – 22” (each side of seat)
STEP 2: REMOVING PANELS
Once you have identified your seat configuration, determine the panels you will need to remove (if any) to fit your seat bench.
Unzip and separate the panels from both the Top and Bottom Covers.
TIP: The width of your seat bench is the same on both the back rest and seat of your bench so you will have to remove (if any) the same amount of panels.
If your seat is a full bench with NO split, skip step three.
STEP 3: BOLSTER INSTALLATION
If your seat bench has a split, you will need to install the bolsters on the Top and Bottom Cover ends BEFORE installing on your seat bench.
a. Unzip both sets of bolsters to separate them from each other. You will now have 4 separate bolsters.
b. Zip up each bolster to each exposed side on the Top Cover. Repeat on Bottom Cover. STEP 4: INSTALLATION
Now that you have the bolsters connected to each panel of the Top and Bottom Cover it’s time to install.
c. Open the headrest slots and slide the Top Cover over the headrests of your bench seat.
NOTE: Be sure the hanging straps do not interfere with the seat belts.
d. Tuck back the strap through the seat crevice. Repeat for Bottom Cover.
STEP 5: CONNECTING THE STRAPS
Starting with the Top Cover connect the straps from the backside of the bench seat.
Connect the top strap to the bottom strap and the left to right on each of the panels of the bench seat as shown on diagram (e.)
Align up the Top Cover and cinch the straps for a snug fit. Be sure not to cover or interfere with any seat belts.
Repeat for Bottom Cover.
STEP 6: HEADREST COVERS
Slide headrest covers over headrests and align.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>