RANTION VPM-10C Wireless Microphone User Manual

RANTION VPM-10C Wireless Microphone User Manual

PACKING LIST

1. Wireless Microphone (Charging Case) *1

2. Transmitter (TX) *2

3. Receiver (RX) *1

4. User Manual *1

5. USB A-USB C Charging Cable *1

6. Storage Bag *1

7. Furry windshield *1

SPECIFICATIONS

INTRODUCTION

Thanks for choosing our product. This device adopts ZAG AFH (adaptive frequency hopping) communication, low latency, ultra-long-distance transmission and reception of audio, innovative DSP intelligent noise reduction, one-key switching, support for reverberation, mute, bilateral real- time ear monitoring, multiple sets of use without mutual microphone interference. It can be widely used in interview recording, short video filming, live streaming, teaching and training, music listening, Karaoke, phone calls, live PK voice chat as well as other wireless acoustic field.

CHARGING CASE

1. LED Indicator:
   Number of charging indicators: 4 blue indicators.
   Recharging for the charging case: The front light shows the current maximum capacity of the battery, and the last indicator flashes.
   The fully charged case: 4 blue indicators are all on.
   Charging for microphones: The current capacity is indicated by blue lights which are on for 3 seconds and then go out.

2. Charging Case:
   Opening the lid will automatically turn on the TX and RX in the charging case; closing the lid will automatically tum off the TX and RX in the charging case.
   Current setting for charging: 600Ma
   Charging time: within 2.5 hours

3. When the low battery indicator flashes, please charge the product as soon as possible.

4. When charging is complete, please take the connection cable out promptly.

5. Without use for a long time, it is recommended to charge the product every two months.

6. Please place the RX receiver and the TX transmitter into the corresponding charging slots according to the charging case label.

TX TRANSMITTER

1. Power Button:
   Function: Power Switch/Noise Reduction Switch;
   Long press: More than 2 seconds for switching the product on/off;
   Short press: For noise reduction switch on/off;
   Three consecutive clicks: To enter the pairing connection mode.

2. M Button:
   Function: Volume/Reverb/Mic Off;
   Short press: Microphone volume increase 1 level. Maximum of 4 levels with a maximum beep. Operates in 3-4-1-2 circulation. The power-up default is level 3;
   Long press: Enable/disable mute mode (microphone off);
   Double-click: Reverb on/off. The power-on default is off.

3. LED Indicator:
   Green: On-Turn on mute mode Off-Turn off mute mode;
   Blue: Slow flash = Not connected Fast flash = Entering pairing mode Long light = Paired connection;
   Blue: On-Noise Reduction Mode, the power-on default is noise reduction mode;
   Sky Blue: Slow flash for non-noise reduction mode;
   Red: Fast flash-Low battery alert, red light on when charging, red light off when full.

4. Type-C Port:
   Charging the product/Earphone monitoring; (Turn on Type-C in-ear monitor by default upon startup)

5. USB-C Charging Port:
   Input 5V/100mA, please choose the charger which has been certified by national CCC.

6. Belt Clip:
   The transmitter should be fixed within 20cm of the sound emitting area, e.g. clothing collar.

7. Microphone:
   Omnidirectional microphone with DSP intelligent noise reduction.

RX RECEIVER

1. LED Indicator: Blue: Slow flash Not connected Fast flash-Waiting for pairing Long light-Paired connection.
2. Pairing Button: Short press the switch with a pin inserted through the small hole of the pairing button to enter pairing mode.
3. Android Male Connector: Transfer data to Android mobile phones.
4. Android Femalely Connector: Connect to external charger to charge Android mobile phones.
5. Type-C Charging Port: Connect the Type-C port audio cable to the plug socket and the other end to your mobile phone or computer for use. Connect the charging cable to charge. Input 5V/100mA. Please choose the charger certified by national CCC

INSTALLATION AND USAGE

1. Long press the TX power button to switch on it and plug the RX Type-C connector into the corresponding port.

2. Wear TX within 20cm of the sound emitting area, eg. clothing collar You can plug in headphones to monitor the recording effect as needed, and short press the M button to adjust the monitoring volume level
   

3. Plug the RX into a capture recording device such as a mobile phone, laptop, tablet, sound card.

4. Plug in your mobile phone/laptop/tablet etc. with RX Type-C connector (please note that different sockets are selected according to different devices). RX Receiver Works with Tablet: Plug it directly into the corresponding port with the Type-C connector.
   
   RX Receiver Works with Smartphone: Plug the Type-C connector into the corresponding socket of your mobile phone according to its model.
   
   RX Receiver Works with Other Device: Plug the Type-C connector into the corresponding socket of the device. Connect your laptop using the Type-C connector.
   

5. TX Power Switch/Noise Reduction Switch. Long press: More than 2 seconds for switching the machine on/off. Short press: For noise reduction switch on/off. The noise reduction mode removes excess ambient noise for you, making the reception clearer.

6. Short press M button: Microphone volume increase 1 level. Maximum of 4 levels with a maximum beep. Operates in 3-4-1-2 circulation. The power-up default is level 3. Long press: Enable/disable mute mode (microphone off). Double-click: Reverb on/off. The power-on default is off.
   

PRECAUTIONS

1. This product is a precise electronic device which should avoid water or heavy fall, if it gets wet, please dry it in time, and hand it up to professional technician for further checking.
2. When not using for a long time, the built-in rechargeable battery should be fully charged every three months to maintain the high performance of the battery.
3. The built-in battery must not be exposed to sunlight, fire, or similar overheating environment.
4. Please use the product configuration or the wire recommended by the dealer/manufacturer; Due to the uniformity of technical standard for cables, product characteristics may be affected or unavailable.
5. Please choose the charger certified by national CCC so as avoid damage to the product or dangerous accidents.
6. To avoid intermittent signal, please try to keep the transmitter and receiver face to face while using.

As shown below

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or shop where you bought this product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>