SENTRY MP750 3 In 1 Folding Charging Station User Manual
- June 17, 2024
- Sentry
Table of Contents
MP750 3 In 1 Folding Charging Station
User Manual
Package Includes
- 3 – N-1 FOLDING CHAR?ING STATION
- USB-C charging cable 1
- Mannual1
Device Layout
*compatibility may differ with different brands. Product Parameter
- Product name: 3-IN-1 FOLDING CHARGING STATION
- Material quality: ABS + Silicone
- Dimensions: 24774.57.5MM
- Interface: USB-C
- Model No.: MP750
- Input: 9V 3A
- Mobile phone output: 5W/7.5W/10W/15W
- Watch* output: 2.5W
- TWS Earbud Case: 3W
- FCC ID：2ASCK-GW50
NOTE:
- Charging rates may vary depending on device or power input.
- Compatibility is subject to differ depending on device and OS
- The Phone/TWS/Watch* itself needs supporting wireless charging.
Steps for usage
The device is connected to the power supply through the charging cable, and
then it can be powered on.
- When charging the mobile phone, place the mobile phone flat in the mobile phone charging area to start charging the mobile phone.After fully charged, simply take off the phone,during the charging process, if you need to terminate the charging, take it directly.
- When charging the Watch, place the Watch flat in the charging area to start charging the Watch. After fully charged, directly remove the Watch; During the charging process, if you need to terminate the charging, remove the Watch* directly.
- When charging the TWS Earbud Case, place the TWS Earbud Case flat in the charging area to start charging. After fully charged, simply remove the TWS Earbud Case; During the charging process, if you need to terminate the charging, remove it directly.
Special Note:
- When charging the Watch*, recommended to use flat and vertical charging at 90 degrees. Do not select 30 degrees as charging may not be possible at this angle.
- Recommended to use the supplied charging cable for power supply, and not to use the original Phone cable.
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information
Model: MP750
Responsible Party – Sentry Industries inc One Bridge street, Hillburn, NY
10931 Tel +1 845 753 2910
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
“NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.”
This equipment must be installed and operated with a minimum distance of 15 cm
between the radiator and user body.
FCC ID : 2ASCK-GW50
WARNING
*CAUTION:* To prevent electric shock, use only compatible and certified
USB charging devices.
WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified may damage your device.
WARNING:** Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
*WARNING: Always store in a cool dry location.
Important Safety instructions
- Read these Instructions.
- Keep these Instructions.
- Heed all Warnings.
- Follow all instructions.
- Do not use this device near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Use in accordance with the manufacturer’s instructions.
- Do not charge near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Discontinue use if damaged.
- Protect the cord from being walked on or pinched particularly at plugs, convenience receptacles, to the point where they exit from the device.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms and when charging is complete.
- Do NOT charge devices unattended
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such aspower-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Charging your device
A USB power adapter with 3A/9V output is required in order for the wireless
charging pad to work properly. Only use a USB power adapter with applicable
country regulations and international and regional safety standards. Other
power adapters may not meet applicable safety standards, and using such
adapters could pose a risk of death or injury. Avoid prolonged skin contact
with the charging cable and connector when the charging cable is connected to
a power source because it may cause discomfort or injury. Avoid charging
devices unattended, and unplug when not in use. Sleeping or sitting on the
charging cable, wireless pad, or connector should be avoided.
Choking hazard : The product, packaging and some of the included accessories
maypresent a choking hazard to small children. Keep these accessories away
from small children. The bags themselves or the many small parts they contain
may cause choking if ingested. Keep product and packaging away from Children
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Sentry Industries Inc is under license.
Other trademarks and trade names are those of their respective owners.
USB Type-C and USB-C are registered trademarks of USB lmplementers Forum.
Limited 90-Day Warranty: Sentry warrants this product to be freefrom
defects in materials and workmanship for 90 days from the date of original
purchase. This warranty does not pertain fo damage resulting from accident,
abnormal use, misuse or neglect. Any defective product will be replaced if
returned to an authorized Sentry dealer or to Sentry directly at: PO Box 885,
One Bridge Street, Hillburn, NY 10931. Please enclose a $5 check for return
shipping. Sentry is a registered trademark of Sentry Industries, Inc. All
other trademarks are property of their respective owners.