Doozoler HST12301 Full Body Shower System User Manual

Table of Contents

Doozoler-HST12301-Full-Body-Shower-System-PRODUCT

Setup

Before using the product, ensure that you have all the necessary components and accessories included in the package.

Power On/Off

To power the device, press the power button located on the front panel. To power off, press and hold the same button for a few seconds.

Operating Modes

This product features multiple operating modes such as XOHU, +KUL]RQWDOUXOH, SLQFHUSOLHUV, and more. Refer to the user manual for detailed instructions on each mode.

Maintenance

Regularly clean the product using a soft, damp cloth to remove any dust or debris. Avoid using harsh chemicals that may damage the surface.

Frequently Asked Questions (FAQ):

Q: How do I reset the product to factory settings?

A: To reset the product to factory settings, navigate to the settings menu and look for the reset option. Follow the on-screen instructions to complete the reset process.

Q: What should I do if the product displays an error code?

A: If you encounter an error code on the display, refer to the user manual for a list of error codes and their corresponding solutions. If the issue persists, contact customer support for further assistance.

Please read over these instructions thoroughly before beginning installation.
- Make sure that you have all the tools and supplies needed to complete the installation.
For best results, we recommend that this unit be installed by a licensed, professional plumber.
Make sure inlet pipes and supply valves have been installed and cleaned, and also ensure no impurities in the pipeline.
After installation, check all joints for leakages.

Doozoler-HST12301-Full-Body-Shower-System-FIG-20

STEP 1: Layout shower head power/water pipe
STEP 2: Measure shower head holes on the ceiling
STEP 3: Install fix frame Shower installation fixed frame A
- Shower installation fixed frame B
- There are two methods to install the fixed frame.
- A : Use screws to fix directly.
- B : Use expansion bolts 150-500mm to fix.
STEP 4: Layout water pipe
STEP 5: Install shower head
STEP 6: Connect water inlet pipe
STEP 7: Connect LED & audio power line
STEP 8: Testing the water
STEP 9: Shower installation

USA: 1/2″ -14 NPT
Canada: 1/2″-14 NPT
Europe: G1/2″
The product is equipped with G1/2 specifications connectors or interfaces, and it is recommended that users use G1/2 specifications connectors or interfaces.
The G1/2 connector or interface is compatible with the NPT1/2 connector or interface. If you use the NPT1/2 connector or interface, please wrap enough blocking tape on the connector or interface.
Cut off excess parts with a saw.
Put on the decoration cover, then screw the body jet in.

Bluetooth Name: Music Shower System

Put the power on the shower and the speaker will automatically enter pairing mode, then continue to step 2.
- The speaker will try to establish a connection with the last connected Bluetooth device.
- If the device is nearby, a Bluetooth connection is automatically established and two beeps will be heard.
Run the pairing program on the Bluetooth device to detect the speaker.
- When the Bluetooth device displays the list of detected devices, select [Music Shower System].
If a password is required on the Bluetooth device display, enter 0000.
- A password can be called a “code PIN or password”.
Once the Bluetooth connection has been successfully established, you will hear two beeps.
If the Bluetooth connection is not established, repeat from step 1.

Modern faucets and shower products utilize a combination of materials to comply with the needs of the market about design and functionality.
To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the warranty.
To remove lime scale, use only products made specifically for that purpose. Always follow the manufacturer’s instructions when using.
Do not use cleaners that contain hydrochloric, formic, acetic, or phosphoric acids, as these will cause considerable damage to finishes and to plastic components.
Never use cleaners containing abrasives. Do not use abrasive cleaning cloths, pads, or sponges.
Clean your faucets and shower products as and when required. Regular cleaning will prevent scale buildup and water spotting.
When using spray cleaners, spray first onto a sponge or cloth, do not spray directly onto the product.
After cleaning, rinse thoroughly with clear water to remove any cleaner residue.
Soap and shampoo residue can also cause damage to the product. Rinse well with clean water after use.
If the surface is already damaged, harsh cleaning materials will cause further damage.