KOHLER 35927-BL 18 Inch Matte Black Wall Mount Single Towel Bar Instruction Manual
- June 17, 2024
- Kohler
Table of Contents
KOHLER 35927-BL 18 Inch Matte Black Wall Mount Single Towel Bar
Product Information
Specifications
- Model Number : 1536850-2
- Recommended Tissue Holder Location: H = 8″ (203 mm) to 12″ (305 mm), W = 6″ (152 mm)
- Drill Bits Required: 1/8″, 1/4″, 5/16″
Product Usage Instructions
Installation Procedure
- Identify the appropriate location for installation.
- If possible, secure the product to a wall stud for added stability.
- Depending on the surface material, drill holes using the recommended drill bit size:
- For installation to a stud: Drill 1/8″ holes.
- For installation to drywall between studs: Drill 5/16″ holes.
- For installation to ceramic tile: Drill 1/4″ holes.
- For installation between studs, use the provided pin to install drywall anchors.
- For installation to concrete or tile, use ceramic anchors.
- Follow specific instructions for different components like robe hooks.
Safety Precautions
- Do not use the product as a grab bar or support bar to avoid the risk of personal injury.
- Ensure proper installation according to the provided guidelines.
Maintenance
Regularly check the product for any loose fittings or damage. Clean with a
mild soap solution and a soft cloth.
FAQs
Q: Can I use this product as a grab bar or support bar?
A: No, it is not recommended to use this product for such purposes to
prevent the risk of personal injury.
Q: What should I do if I encounter difficulties during installation?
A: Contact our Customer Care Center for assistance and guidance with the
installation process.
- CAUTION: Risk of personal injury. Do not install where the product might be used as a grab bar or support bar.
- IMPORTANT! When possible, secure the product to a wall stud. Your product may appear different than the one illustrated. The installation procedure is the same.
- 1A. Drill Bits: 1/8″, 1/4″, 5/16″
- 2A. Recommended Tissue Holder Location: H = 8″ (203 mm) to 12″ (305 mm), W = 6″ (152 mm)
- 3A. Robe Hook: Loosen the setscrew. Remove the robe hook.
- 6A. For installation to a stud, drill 1/8″ holes. For installation to drywall between studs, drill 5/16″ holes. For installation to ceramic tile, drill 1/4″ holes.
- 7A. Installation Between Studs: Use the provided pin to install the drywall anchors.
- Installation to Concrete or Tile: Install ceramic anchors.
INSTALLATION INSTRUCTION
Need help?
Contact our Customer Care Center.
- USA/Canada : 1-800-4KOHLER (1-800-456-4537) Mexico: 001-800-456-4537
- Service parts: kohler.com/serviceparts
- Care and cleaning : kohler.com/clean
- Patents : kohlercompany.com/patents
This product is covered under the KOHLER ® Faucet Lifetime Limited Warranty, found at kohler.com/warranty. For a hardcopy of warranty terms, contact the Customer Care Center.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>