iGage iG10 Firmware Update User Guide
- September 19, 2024
- iGage
Table of Contents
iG10 Firmware Update
“`html
Product Information
Specifications:
- Model: iG10
- Interface: Web Interface
- Wi-Fi: Internal Access Point
- IP Address: 192.168.10.1
- Port: 80
- User Name: admin
- Password: password
Product Usage Instructions
Connecting the iG10 Receiver to a Computer via Wi-Fi:
-
Ensure your computer’s Wi-Fi is turned on.
-
Locate the iG10 receiver’s Wi-Fi network with SSID:
Sxxxxxxxxxxxx. -
Connect to the iG10 network using the Wi-Fi key provided.
-
Open a web browser and enter the IP address 192.168.10.1.
-
Enter the username ‘admin’ and password ‘password’ when
prompted. -
You are now connected to the iG10 web interface for
configuration and firmware updates.
Updating Firmware:
-
In the web interface, click on ‘Management’ on the left
panel. -
Click on ‘Choose File’ and select one of the three firmware
files: Mainboard, OEM, or Radio. -
Click ‘Submit’ to initiate the firmware update process.
-
Follow any on-screen instructions for rebooting or reconnecting
after the update.
FAQ (Frequently Asked Questions)
Q: What should I do if I encounter connection issues while
trying to update firmware?
A: Make sure you are connected to the correct Wi-Fi network of
the iG10 receiver and that the IP address is entered correctly in
the browser. You can also try restarting both your computer and the
receiver before attempting the update again.
Q: Can I update the firmware using a smartphone instead of a
PC?
A: Yes, you can use a smartphone with a compatible browser to
access the iG10 web interface for firmware updates. However, the
screens may vary slightly compared to desktop browsers.
“`
iG10
Firmware Update
1
iGage iG10 User Manual
iG10 Web Interface
The iG10 web interface allows detailed configuration of the receiver. The iG10
receiver has an internal Wi-Fi Access Point which can be used in conjunction
with a PC or smartphone to configure and control every feature of the receiver
including firmware updates. This manual section describes how to connect to
the head by Wi-Fi, the screens match desktop browsers. A mobile (cell phone)
browser may be different.
Connecting a computer
Connect a computer to the iG10 receiver using Wi-Fi.
Device Wi-Fi overview:
SSID:
Sxxxxxxxxxxxx
Wi-Fi Key: (open)
open
address: 192.168.10.1
port:
80
User Name: admin
password: password
device-serial-number no password is needed, connection is
lower case lower case
To connect the iG10 to your PC with Wi-Fi, on the PC system tray click on the network icon (1) then click on the Wi-Fi list button (2):
Click on the Network icon in the System Tray
2
iGage iG10 User Manual
Find the iG10 receiver:
Click on Connect. Wait a moment for the connection to be completed. If a
dialog noting there is no internet available from the connection, choose to
`stay connected’. Open a browser window and browse to the IP address:
192.168.10.1:
Enter admin’ for the User and
password’ for the Password, then click Login
iGage iG10 User Manual
3
The main interface `Dashboard’ window will be shown:
Click on Management on the left panel.
Click on Choose File, browse to one of the three firmware files, select it and
click Submit. The Preferred order is:
Mainboard (a reboot and reconnect will required after update) OEM Radio
4
iGage iG10 User Manual