LUCIDE 45597-20-02 Table lamp Firmin Instructions
- June 17, 2024
- LUCIDE
Table of Contents
INSTALLATION MANUAL FIRMIN
Item number: 45597/20/02
EAN code: 5411212451637
45597-20-02 Table lamp Firmin
Thank you for purchasing a Lucide original!
This manual will hopefull y guide you easil y through the installation
process. We aim to inspire and illuminate our clients by offering trendy,
high-quality and affordable lighting.
Welcome to the community of #illuminatesyourworld
DISCOVER OUR COLLECTION!https://qrcodes.pro/ctf05b
Visit our website and discover our entire collection
|
CURIOUS ABOUT OUR BRAND?https://qrcodes.pro/PEN8Q4
Our brand video gives you a glimpse behind the scenes at Lucide
|
ILLUMINATESYOURWORLDhttps://qrcodes.pro/mJ5x94
Take a look at how others around the world use Lucide
products
---|---|---
RECOMMENDED LUCIDE LIGHT SOURCE
49020/05/60
Dimmable: Yes
Included: No
General
Dimensions LxWxH: 20cm x 20cm x 23,5cm
Main material: Glass
Color: Matt Gold / Brass and Opal
Style: Classic
Shape: Cylinder
Weight: 1,80kg
Specifications
Dimmable: No
Light direction: Around (Diffuse)
Adjustable in height: Not In Height Adjustable
Directional: Not Directional
Cable: Yes, Cable With Plug On Product
Cable length: 150cm
Sensor: Without Sensor
Control: On/Off Switch – In The Cord
Power supply: Adapter/Power Grid
IP-Class: 20
Electric Class: 2
Number of light sources: 1
Lamp socket: E27
Maximum wattage: 40W
Power requirements: 220-240V~50Hz
Warranty: 2 Years
For more specifications of this product please visit
www.lucide.com
TECHNICAL DRAWING & DIMENSIONS
For more specifications or dimensions of this product please visit www.lucide.com
INSTALLATION DRAWING SPECIFICATIONS
Safety Instructions
Please read this notice carefull y and keep it during the lifetime of this
product. Follow the instructions for a safe and correct installation and
functioning of the light fixture.
The manufacturer does not accept any responsibility for damage caused by
improper installation and service.
Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance or
repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor,
outdoor, bathroom (for outdoor and bathroom installation, please see further).
Indoor items cannot be used in humid places.
Do not put the item in contact with water or any liquids or inflammable
products.
Always respect the minimal distance (indicated on the light) to inflammable
products.
During installation, make sure that the cables will not be squeezed or damaged
by sharp edges. If the external flexible cable is damaged, it needs to be
replaced exclusively by the manufacturer, his service agent, or a qualified
electrician.
This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must
cool down before being touched.
Always use the correct bulb (respect type and maximal wattage as indicated on
the product).
Explanation of the symbols which can appear on the fixture
| This item is only suitable for indoor use, exclusive bathroom
(except if a higher IP degree permits that the item can be used in the
bathroom).
---|---
| Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling.
Electrical and electronic equipment marked with this symbol indicating
separate collection of such equipment must be returned to a municipal waste
collection point.
| Class I: The item has an earth connection. The earth wire (green-
yellow) needs to be connected to the earth connection (marked with this
symbol).
| Class II: The item is double insulated and must not be connected to the
earth wire.
| Class III: The item is only suitable for lower voltage suppl y and must
not be connected to the earth wire.
| IP 20: Protection against contact with a finger
| If the protection glass is damaged or broken, it needs to be replaced
immediately.
| Please respect the minimum distance from the bulb to inflammable objects.
Warranty declaration:
Lucide NV warrants that the products supplied will be free from defects in
material and workmanship for a period of 2 years from the date of purchase by
the end user, if the item is installed and maintained properly as mentioned in
the user manual.
Exclusions for the warranty:
- Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
- Normal wear and tear, discoloring as a result from normal use.
- Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product.
For warranty claims the customer needs to hand over defective fixture/part and the original purchase ticket.
Further explanations can be found on our website.
www.lucide.com
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
info@lucide.com tel: +32(0)3 366 22 04
www.lucide.com
Follow us for the latest lighting trends!