LUCIDE 45498-07-02 Coralie Pendant Light Instruction Manual
- June 17, 2024
- LUCIDE
Table of Contents
- Thank you
- RECOMMENDED LUCIDE LIGHT SOURCE
- General
- Specifications
- TECHNICAL DRAWING & DIMENSIONS
- INSTALLATION DRAWING SPECIFICATIONS
- Safety Instructions
- Explanation of the symbols which can appear on the fixture
- Warranty declaration
- Customer support
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LUCIDE 45498-07-02 Coralie Pendant Light
Thank you
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting.
Welcome to the community of #illuminatesyourworld
-
DISCOVER OUR COLLECTION!
Visit our website and discover our entire collection
-
CURIOUS ABOUT OUR BRAND?
Our brand video gives you a glimpse behind the scenes at Lucide
-
#ILLUMINATESYOURWORLD
Take a look at how others around the world use Lucide products
RECOMMENDED LUCIDE LIGHT SOURCE
49042/05/62
Dimmable: Yes
Included: No
Item number: 45498/07/02
EAN code: 5411212451620
CORALIE
General
Dimensions LxWxH: 132cm x 25cm x 150cm
Height minimum: 50cm
Height maximum: 150cm
Main material: Glass
Ceiling rose material : Steel
Color: Matt Gold / Brass and Smoke Grey
Style: Classic
Shape: Rectangle
Weight: 6,50kg
Specifications
Dimmable: Yes
Light direction: Around (Diffuse)
Adjustable in height : Adjustable In Height (Before Installation)
Directional: Not Directional
Cable: Yes, Cable On Product
Cable length: 120cm
Sensor: Without Sensor
Control: Light Switch Control
Power supply: Adapter/Power Grid
IP-Class : 20
Electric Class: 2
Number of light sources: 7
Lamp socket: E27
Maximum wattage: 40W
Power requirements: 220-240V~50Hz
Warranty: 2 Years
TECHNICAL DRAWING & DIMENSIONS
INSTALLATION DRAWING SPECIFICATIONS
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this
product. Follow the instructions for a safe and correct installation and
functioning of the light fixture. The manufacturer does not accept any
responsibility for damage caused by improper installation and service.
Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance or
repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor,
outdoor, bathroom (for outdoor and bathroom installation, please see further).
Indoor items cannot be used in humid places. Do not put the item in contact
with water or any liquids or inflammable products. Always respect the minimal
distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged
by sharp edges. If the external flexible cable is damaged, it needs to be
replaced exclusively by the manufacturer, his service agent, or a qualified
electrician.
This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must
cool down before being touched. Always use the correct bulb (respect type and
maximal wattage as indicated on the product).
Explanation of the symbols which can appear on the fixture
This item is only suitable
for indoor use, exclusive bathroom
(except if a higher IP degree permits that the item can be used in the
bathroom).
Legislation requires that
all electrical and electronic equipment must be collected for reuse and
recycling.
Electrical and electronic equipment marked with this symbol indicating
separate collection of such equipment
must be returned to a municipal waste collection point.
Class I : The item has an earth connection. The earth wire (green-yellow)
needs to be connected to the earth
connection (marked with this symbol).
Class II : The item is double insulated and must not be connected to the
earth wire.
Class III : The item is only suitable for lower voltage supply and must
not be connected to the earth wire.
IP 20: Protection against
contact with a finger
If the protection glass is damaged or broken, it needs to be replaced
immediately.
Please respect the minimum distance from the bulb to inflammable objects.
Warranty declaration
Lucide NV warrants that the products supplied will be free from defects in
material and workmanship for a period of 2 years from the date of purchase by
the end user, if the item is installed and maintained properly as mentioned in
the user manual.
Exclusions for the warranty:
- Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
- Normal wear and tear, discoloring as a result from normal use.
- Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product.
For warranty claims the customer needs to hand over defective fixture/part and the original purchase ticket.
Customer support
Follow us for the latest lighting trends!
Further explanations can be found on our website.
www.lucide.com
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
info@lucide.com
tel : +32(0)3 366 22 04
www.lucide.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>