LUCIDE 30192-45-36 Rayco Ceiling Light Instruction Manual
- June 17, 2024
- LUCIDE
Table of Contents
LUCIDE 30192-45-36 Rayco Ceiling Light
Thank you
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting.
Welcome to the community of #illuminatesyourworld
Description
RECOMMENDED LUCIDE LIGHT SOURCE
49032/05/62
Dimmable: Yes
Included: No
General
Dimensions LxWxH: 45cm x 45cm x 19cm
Main material: Steel
Ceiling rose material: Steel
Color: Grey
Style: Vintage
Shape: Half-Round
Weight: 1,70kg
Specifications
Dimmable: Yes
Light direction: Around (Diffuse)
Adjustable in height: Not In Height Adjustable
Directional: Not Directional
Cable: No Cable On Product
Sensor: Without Sensor
Control: Light Switch Control
Power supply: Adapter/Power Grid
IP-Class: 20
Electric Class: 1
Number of light sources: 1
Lamp socket: E27
Maximum wattage: 40W
Power requirements: 220-240V~50Hz
Warranty: 2 Years
Dimension
Installation
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this
product. Follow the instructions for a safe and correct installation and
functioning of the light fixture. The manufacturer does not accept any
responsibility for damage caused by improper installation and service.
Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance or
repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor,
outdoor, bathroom (for outdoor and bathroom installation, please see further).
Indoor items cannot be used in humid places. Do not put the item in contact
with water or any liquids or inflammable products. Always respect the minimal
distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged
by sharp edges. If the external flexible cable is damaged, it needs to be
replaced exclusively by the manufacturer, his service agent, or a qualified
electrician.
This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must
cool down before being touched. Always use the correct bulb (respect type and
maximal wattage as indicated on the product).
Explanation of the symbols which can appear on the fixture
This item is only suitable
for indoor use, exclusive bathroom (except if a higher IP degree permits that
the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling.
Electrical and electronic equipment marked with this symbol indicating
separate collection of such equipment must be returned to a municipal waste
collection point.
Class I : The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
Class II : The item is double insulated and must not be connected to the earth wire.
Class III : The item is only suitable for lower voltage supply and must not be connected to the earth wire.
IP 20 : Protection against contact with a finger
If the protection glass is damaged or broken, it needs to be replaced immediately.
Please respect the minimum
distance from the bulb to inflammable objects.
CUSTOMERS SUPPORT
DISCOVER OUR COLLECTION!| CURIOUS ABOUT OUR BRAND?|
#ILLUMINATESYOURWORLD
---|---|---
|
|
Visit our website and discover our entire collection| Our brand video gives
you a glimpse behind the scenes at Lucide| Take a look at how others around
the world use Lucide products
Further explanations can be found on our website.
www.lucide.com
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
info@lucide.com tel: +32(0)3 366 22 04
www.lucide.com
Follow us for the latest lighting trends!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>