RAVEtone 20231201 Night Lights Plug Into Wall 2 Pack Plug in Night Light for Kids User Manual

RAVEtone 20231201 Night Lights Plug Into Wall 2 Pack Plug in Night Light

for Kids

Specifications

• Input voltage/current: 110-230V / 50-60HZ
• Power rating: Max 0.6W
• Voice pickup range: Max. 3m / 10 feet
• Product size: 6.3×6.3×4.7 cm
• Microphone
• Light Sensor

Product Information
Hey Light! Smart Voice Color Changing LED Night Light is a versatile night light that offers voice control and automatic color-changing features. It can operate in both Day Time Mode and Night Time Mode, providing convenience and ambiance to your space.

Usage Instructions
Day/Night Time Modes
The night light has two modes:

• Day Time Mode: Works in both daytime and nighttime.
• Night Time Mode: Automatically turns on at dusk or when the room is dark, and turns off at dawn or when the room is sufficiently lit.

Voice Control Operation
You can control the light using voice commands. Some common voice commands include:

• Turn ON/OFF the Light
• Change Color
• Colorful Mode

Button Operation
Use the operation button to manually change color/mode. Short press to switch between different colors and modes. Long press to adjust brightness.

FAQ

• What are the safety precautions for using the Smart Voice Color Changing LED Night Light?
  Use the voice control function in a quiet environment.
  Place the product in a space with minimal clutter.

• How do I reset the device if it does not respond to voice commands?
  If the device does not respond to voice commands, use the wake-up keyword “Hey Light” to reactivate it before issuing new voice commands.

• Can I adjust the settings of the night light using voice commands?
  Yes, you can adjust settings such as color, brightness, and lighting modes using voice commands or the operation button after the device is turned on.

Thank you for your trust!
Congratulations on your new Smart Voice Color Changing Led Night Light.

For safe handling of the device and to get to know the entire scope of features:

• Thoroughly read these user instructions before initial use.
• Above all, observe the safety information!
• The device should only be used as described in these user instructions.
• Keep this copy of the user instructions for future reference.
• If you pass the device on to someone else, please include this copy of the user instructions. The user instructions are a part of the product.

We hope you enjoy your new Smart Voice Color Changing Led Night Light!

At a Glance

Specifications

After-sale Service If you have any problems during use, Please contact our after-sales team first and leave us messages, We will contact you immediately.

Light Operation Button Operation ( Manual )

• A short press of the button will switch the light color/modes according to the following sequence:
• Warm-Red-Green-Blue-Purple-Cyan-Pink-White-Yellow
  • Fast Flash-Flash-Colorful Mode-Dynamic Gradient Mode
  • Music Mode
• Long press to adjust to maximum or minimum brightness.

Voice Control Operation

• Directly enter voice commands within 15 seconds after plugging into the socket.
  Common Voice Commands: Turn ON/OFF the Light， Change Color， Colorful Mode

• If it takes more than 15 seconds after your last voice commands, you need to reactivate the device using the wake-up keyword before applying voice commands.
  Wake-up Keywords： Hey Light

Day/Night Time Mode

Day Time Mode ( Default mode )

The light sensor is deactivated. You can change the device settings (color, brightness, lighting modes) using either voice commands or the operation button. The light will turn on when you switch to this mode.

Night Time Mode

• The light sensor is activated; the device only operates when the surrounding light is dim.
• You can only adjust its settings（color, brightness, and lighting modes）using voice commands or the operation button after the device is turned on.

Note:
Please note that you can only switch the modes via voice commands: “Day Time Mode” and “Night Time Mode”.

“Hey light” Wake-up keywords
This command activates the light in two ways:

1. If the device is inactive for 15 seconds, it enters Standby Mode. To reactivate it, just say “Hey Light.”
2. When the device is powered off, say “Hey Light” to reactivate it, followed by “Turn on the light” after a single flash, and then give other commands.

Note:
Upon plugging the device into the socket for the first time, it immediately lights up, allowing direct control through voice commands.

Important Safety Precautions

• Only fit the LED light in a proper power socket.
• Do not attempt to disassemble the product.
• Do not allow this product to have contact with liquids.
• Do not place this product near a heat source or flame.
• Use a soft cloth to clean the exterior. Do not use harsh chemicals or strong cleaning solvents.
• This device is not intended for use with emergency exits.
• Do not subject the device to knocks and vibrations. Knocks and vibrations may damage the sensitive electronics.

Voice Commands Table

Hey Light

| The Wake-up keywords help you to activate the voice control feature, please use it if the light doesn’t respond to your voice commands.

The light will flash once to indicate its activation.

Day Time Mode| The light sensor is deactivated, you can change its status (color, brightness, lighting modes) with the voice commands or operation button.

Night Time Mode

| The light sensor is activated, the device only works while the surrounding light level is low. You only can change its status (color, brightness, lighting modes) after it turns on.
Turn on the Light

Switch on the light ( Option )

| The LED lights up.
Turn off the Light

Switch off the Light ( Option )

| Switch off the light.
Change Color| Switch the light color in the following sequence: Warm-Red- Green-Blue-Purple-Cyan-Pink-White-Yellow
Colorful Mode| Quick command for breathing light mode.
Change the Mode| Switching four colorful lighting modes in sequence: Fast Flash-Flash-Colorful Mode-Dynamic Gradient Light
Music Mode| Make the light blink in sync with the rhythm of the music.

If no sound detected, the light will change to breathing light mode.

Brighten the Light| Increase in brightness level. (5 brightness levels include) The light will flash when reaching full brightness.
Dim the Light| Diminish in brightness level. (5 brightness levels include) The light will flash when reaching minimum brightness.
Maximum Brightness| Adjust the Brightness to Maximum level.
Minimum Brightness| Adjust the Brightness to Minimum level.
Warm Light| Change the light color to warm.
Red Light| Change the light color to red.
Green Light| Change the light color to green.
Blue Light| Change the light color to blue.
Purple Light| Change the light color to purple.
Cyan Light| Change the light color to cyan.
Pink Light| Change the light color to pink.
White Light| Change the light color to white.
Yellow Light| Change the light color to yellow.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>