RAVEtone ‎Cat-201NL Smart Voice Color Charging LED Night Light User Manual

RAVEtone ‎Cat-201NL Smart Voice Color Charging LED Night Light

Thank you for your trust!
Congratulations on your new Smart Voice Color-changing Led Night Light. For the safe handling of the device and in order to get to know the entire scope of features

• Thoroughly read these user instructions prior to initial use.
• Above all, observe the safety information!
• The device should only be used as described in these user instructions.
• Keep this copy of the user instructions for future reference.
• If you pass the device on to someone else, please include this copy of the user instructions. The user instructions are a part of the product. We hope you enjoy your new Smart Voice Color-changing Led Night Light!

Intended Purpose

This is a home decor lighting device. The night light is intended for normal indoor lighting. The voice control function adds convenience and interest to the light. The device is designed for private use. This device must not be used for commercial purposes.

Important Safety Precautions

• Do not attempt to disassemble the product.
• Do not allow this product to have contact with liquids.
• Do not place this product near a heat source or flame.
• Use a soft cloth to clean the exterior. Do not use harsh chemicals or strong cleaning solvents.
• Do not subject the device to knocks and vibrations. Knocks and vibrations may damage the sensitive electronics.

At a Glance

Specifications

User Manual

Operating Instructions

Setting up the device safely

1. This device is not for use by unsupervised children.
2. Only fit the LED light in a proper power socket.
3. This device is not intended for use with emergency exits.

Light control

Plug in the LED light into the power socket. Switch on the power supply.

“Hey light” Command
The command acts as a Wake-up keyword to help you activate the light in the following 2 states: ( The light will flash once to indicate its activation)

1. When the device is not in use for 15 seconds, it will turn into Standby Mode. If you want to reactivate the device again, just simply say “Hey Light” to wake it up.
2. If you need to turn on the device again when it is powered off, you can say “Hey Light” to reactivate the device first, and then say “Turn on the light” after the light flashes once, and then give other

Note:
When you plug the device into the socket for the first time, it will light up immediately and then you can control the linht hu unira command directly

Activate more unique light effects as follows:

White- Yellow -Warm White – Red – Green – Blue- Purple-Cyan – Pink

Music Mode| Sync your light with your favorite music.

NOTE: if no voice is detected, the light will change to Breathing light mode.

Colorful Mode| Quick command for breathing light mode.

The light will immediately switch to breathing light mode.

Change the Mode| Switching between four colourful lighting modes in sequence
Brighten the light| Increase in brightness level. (4 brightness levels include)

NOTE: The light will flash when reaching full brightness.

Dim the light| Decrease in brightness level.(4 brightness levels include)

NOTE: The light will flash when reaching minimum brightness.

Maximum Brightness| Adjust the Brightness to Maximum level.
Minimum Brightness| Adjust the Brightness to Minimum level.
Yellow Light| Change the light color to yellow.
Green Light| Change the light colour to green.
Blue Light| Change the light colour to blue.
Red Light| Change the light colour to red.
Purple Light| Change the light colour to purple.
Cyan Light| Change the light colour to cyan.
White Light| Change the light color to white.

Note:

Please try to use the light in a quiet environment. The built-in Smart voice chip is very sensitive and vulnerable to the noisy environmental sounds.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>