Xiaomi N300 WiFi Range Extender

Specifications:

• Product Name: Xiaomi WiFi Range Extender N300
• Model: RD10M
• Network Standard: 802.11n
• Indicator Colors: Blue (working normally), Yellow (switching on), Red (hardware fault)

Product Information

The Xiaomi WiFi Range Extender N300 is designed to extend the range of your home Wi-Fi network. It helps in amplifying and improving the Wi-Fi signal strength in areas where the signal is weak.

Installation:

1. Place the range extender in a location where you require a stronger signal.
2. Connect it to the power supply and wait for the yellow indicator to start flashing.
3. Scan the QR code to download the Mi Home App/Xiaomi Home App.
4. Follow the in-app instructions to configure the range extender.
5. Once configured, you can move the range extender to your desired location.

Usage Instructions

To manage the Xiaomi WiFi Range Extender N300:

1. If using with the Mi Home app, open the app and check the range extender status regularly.
2. If using with a different router, ensure there is no interference on the network.

If the range extender stops working:

1. Check for poor signal and adjust the position of the range extender.
2. If offline, verify router connectivity and restart the range extender.
3. Check for any blacklist issues with your router.

Certifications:
The Xiaomi WiFi Range Extender N300 complies with Directive 2014/53/EU, Directive 2011/65/EU, and Directive 2009/125/EC. For more information, refer to the EU declaration of conformity.

Disposal Information:
Dispose of waste electrical and electronic equipment properly at designated collection points to prevent negative consequences to the environment and human health. Contact local authorities for more information on recycling.

About this product

The Xiaomi WiFi Range Extender N300 is designed to extend the range of your home Wi-Fi network.

Indicator
Constant blue (working normally) Flashing blue (update in progress) Constant yellow (switching on) Flashing yellow (waiting to initialize) Flashing red (hardware fault)

Reset button
Press and hold for at least 5 seconds to restore factory settings.

Installation

Place the range extender in a location where you require a stronger signal. Connect it to the power supply and wait for the yellow indicator to start flashing.

Scan the QR code to download the Mi Home App/Xiaomi Home App and follow the in-app instructions to configure the settings and manage the device.

The blue indicator will stay constant when the settings have been configured. You can then move the range extender to another location without reconfiguring the settings.

FAQs (frequently asked questions)

How do I manage the Xiaomi WiFi Range Extender N300?

If using with the Mi Home app, regularly check the range extender status. If using a different router, ensure no interference on the network.

What should I do if the Xiaomi WiFi Range Extender N300 stops working?

If facing issues, check for poor signal, router connectivity, and blacklist problems. Follow troubleshooting steps provided in the Mi Home app.

How does the Xiaomi WiFi Range Extender N300 extend the range of my Wi-Fi network?

The range extender is designed to strengthen the signal from an existing Wi-Fi network. Before configuring the range extender, determine which network you need to extend and ensure that you know the Wi-Fi password. Range extenders work in a similar way to a relay race – the main router and the range extender are the participants in the race, while the Wi-Fi signal is the baton which is passed between each participant. The connected devices (e.g. your smartphone or computer) are the finish line. The participants pick up the baton and deliver it to the finish line, allowing the Wi-Fi network to cover a larger area. The more range extenders you add to the network, the greater the network range.

How do I manage the Xiaomi WiFi Range Extender N300?

If you use the range extender in combination with the Mi Wi-Fi router, you can manage the settings using the Mi Wi-Fi app. If you are using a different router, you can download the Mi Home app to manage the network settings.

What should I do if the Internet speed slows down after I connect the Xiaomi WiFi Range Extender N300?

If the Internet speed slows down after you connect the range extender, there may be interference on the network. Open the Mi Wi-Fi app or Mi Home app and check the range extender status. If the app indicates that the signal is poor, move the range extender closer to the router and try again.

What should I do if the Xiaomi WiFi Range Extender N300 stops working?

Open the Mi Wi-Fi app or Mi Home app and check the range extender status, and then follow the troubleshooting steps below: If the signal is poor, move the range extender to another location where there are no large obstacles between the range extender and the router. If the range extender is offline, check that the router is emitting a Wi-Fi signal. If the router is working normally, restart the range extender and try again. Check whether the range extender was blacklisted by your router. If the issue persists, hold down the reset button for at least 5 seconds until the indicator is constant yellow. Reconfigure the settings and try again.

How do I configure the settings if I want to connect the range extender to a new Wi-Fi network?

Reset the range extender to factory settings and reconfigure the settings.

Specifications:

• Name: Xiaomi WiFi Range Extender N300
• Model: RD10M
• Operating Temperature: 0~40°C
• Input: 100~240VAC, 50/60Hz, 0.35A
• Operating Frequency: 2400MHz~2483.5MHz(≤20dBm)

Note： The network standby power consumption is 1.3 W ,if all wired network ports are connected and all wireless network ports are activated.

Certifications:
Hereby, Beijing Xiaomi Electronics Co., Ltd. declares that the radio equipment type RD10M is in compliance with Directive 2014/53/EU, Directive 2011/65/EU and Directive 2009/125/EC.

The full text of the EU declaration of conformity is available at the following internet address:

• All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
• This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

Caution:
The product can be used within all European Union countries (BE/FR/DE/IT/LU/NL/DK/ IE/GB/GR/PT/ES/AT/FI/SE/ CY/CZ/EE/HU/LV/LT/MT/PL/SK/SI/BG/RO/HR).
To comply with CE RF exposure requirements, the device must be installed and operated 20cm (8 inches) or more between the product and all person’s body. The mains plug is used as disconnect device. The pluggable equipment shall be installed near the socket-outlet and shall be easily accessible.
Manufactured by: Beijing Xiaomi Electronics Co., Ltd.

802, 8th Floor, Building 5, No. 15 10th Kechuang Street, Beijing Economic-

Technological Development Area, Beijing, China, 100176

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.

15.19
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

15.21 / KDB784748 D01 v08 (P4)
Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>