VEVOR GZB88096 Mobile Base Instruction Manual

: June 17, 2024
: VEVOR

Table of Contents

VEVOR GZB88096 Mobile Base
Product Usage Instructions
SAFETY INSTRUCTIONS
MODEL AND PARAMETERS
ASSEMBLY AND USE
MAINTENANCE
Documents / Resources

VEVOR GZB88096 Mobile Base

VEVOR-GZB88096-Mobile-Base-PRODUCT

Specifications

Model: GZB88096
Product: Mobile Base
Material: Alloy Steel
Product Size: Minimum 12×12 inches
Load Capacity: 400 lbs max.

Product Usage Instructions

Preparation

Get everything ready before starting the assembly process.

Assembly Steps

Select the appropriate bolts and nuts to secure the wheels.
Install two support feet.
Measure the length and width of the object to be carried, and cut a slightly larger plywood board according to this size as the base.
Attach the corners to the plywood. Begin by marking the holes using the corner plates as your template.
Drill the holes using a 1/2 inches drill bit, ensuring that the holes are lined up with the plate before drilling each hole.
Put the fixing plate on the plywood board and screw the plywood board to the mobile base.

Final Steps

Status of the complete installation.
Use your feet to move the bracket to the horizontal state to push and pull the object.
After moving to the desired position, adjust the bracket to the vertical state again.
Adjust the mobile base to be level by rotating the supporting feet.

Frequently Asked Questions (FAQ)

Q: What safety precautions should I take when using the mobile base?

A: When assembling and using the product, keep the work area clean, wear ANSI-approved safety goggles and work gloves, avoid flammable materials nearby, do not carry people, avoid stairs, prevent overloading, and move cautiously over pothole areas.

Q: What is the load capacity of the mobile base?

A: The maximum load capacity of the mobile base is 400 lbs.
We continue to be committed to providing you tools with at competitive prices.
Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
The appearance of the product shall be subject to the product you received.
Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING: Read and understand this manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury, or damage to valuable property.

While assembling and using this product, keep the work area clean and well-lighted, and keep spectators and children out of the work area.
Wear ANSI-approved safety goggles and heavy-duty work gloves during use.

| Warning- Be sure to wear eye protectors when using this product.
---|---
| Warning- Be sure to wear gloves when using this product.

Please do not put it near flammable materials.
It is forbidden to carry people under any condition.
This product cannot be used to go up or down stairs.
Overload is strictly prohibited.
Don’t move too fast when passing pothole areas.
Electric tools are required for installation. Please pay attention to safe operation.

SAVE THESE INSTRUCTIONS

MODEL AND PARAMETERS

Material: Alloy Steel
Product size: Minimum 12×12 inches
Load capacity: 400 lbs max.

ASSEMBLY AND USE

Get everything ready.
Select the appropriate bolts and nuts to secure the wheels.
Install two support feet.
Measure the length and width of the object to be carried, and cut a slightly larger plywood board according to this size as the base.
Attach the corners to the plywood. Begin by marking the holes using the corner plates as your template.
Drill the holes using a 1/2 inches drill bit, it is a good idea to check that the holes are lined up to the plate before drilling each hole.
Put the fixing plate on the plywood board and screw the plywood board to the mobile base.
Status of the complete installation.
Use your feet to move the bracket to the horizontal state to push and pull the object. After moving to the desired position, adjust the bracket to the vertical state again, as shown in the figure below.
Adjust the mobile base to be level by rotating the supporting feet.

MAINTENANCE

Avoid prolonged exposure to the sun to avoid aging.
Inspect accessories for wear, cracks, and other damage before use, and replace defective accessories immediately.

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to the USA: Sanven Technology Ltd, Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
EC REP SHUNSHUN GmbH
- Römeräcker 9 Z2021, 76351
- Linkenheim-Hochstetten, Germany
UK REP Pooledas Group Ltd
- Unit 5 Albert Edward House, The
- Pavilions Preston, United Kingdom
Technical Support and E-Warranty Certificate www.vevor.com/support

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support