Ohuhu Y43-82000-01 Permanent Vinyl 32 Pack User Manual
- June 17, 2024
- Ohuhu
Table of Contents
Ohuhu Y43-82000-01 Permanent Vinyl 32 Pack
HOW TO USE
-
Identify the Cutting Surface
Usually the side with color is the cutting side. The other side with grid lines can protect the adhesive strength of the adhesive layer. -
Design Your Pattern and Cut It
Design your own pattern, place the adhesive vinyl on the cutting mat with the cutting side facing up, set the parameters and then start the machine to cut.
Tips: To avoid unwanted waste, you can use a small amount of material to test before your formal creation. DO NOT mirror image when cutting. -
Weed the Extra Parts
After cutting, remove the extra parts of the pattern (waste) and leave the desired pattern. -
Transfer the Pattern
Use the transfer paper tape to transfer the pattern to your desired position (any dry and smooth flat surface, such as windows, mugs, labels, home decor, cell phone cases, laptops, etc.).
Tips: You can use a scraper tool to make the tape flat with on remove wrinkles and bubbles and get the pattern stick more tightly and firmly to your desired surface. -
Finally, here comes your creative artwork!
Machines Parameter Setting Reference
Our permanent vinyl perfectly matches various cutting machines, such as Silhouette Cameo, Circuit Expression, Explore Air, etc. (The cutting settings may vary depending on blade condition and machine service life, please make sure the blade is sharp enough and free of debris)
Cricut Explore Air 2: Blade: standard; setting: Iron on +.
Silhouette Cameo 4: Blade: 2; force: 6; speed: 5; passes: 2.