Ohuhu 82000-05-CA-0519 Heat Transfer Vinyl 42 Pack User Manual
- June 15, 2024
- Ohuhu
Table of Contents
Ohuhu 82000-05-CA-0519 Heat Transfer Vinyl 42 Pack
Description
- Ohuhu heat transfer vinyl, or HTV for short, is a specialty vinyl polymer that can be used on certain fabrics and materials to create designs and promotional products.
- These vinyl sheets have adhesive backings/clear protective films so they can be cut, weeded, and placed on a substrate for heat application.
HOW to USE Ohuhu Heat Transfer Vinyl
Distinguish each layer and side of the heat transfer vinyl before cutting.
- There are 2 layers for an ordinary heat transfer vinyl sheet. The A side attached to the clear protective film is the ironing surface, while the B side is the cutting surface.
- There are 3 layers for a chameleon heat transfer vinyl sheet.
-
The A side attached to the clear protective film is the ironing surface, while the B side is the cutting surface.
-
A side — Ironing Surface
-
B side — Cutting Surface
Craft cutter settings
Please do a test cut to craft the cutter settings before creating and cutting
your design. Load a heat transfer vinyl into your cutting machine with the B
side facing up, then turn on the machine to start cutting. Be careful to
adjust the cutting blade to cut through the vinyl sheet but won’t cut through
the clear protective film.
Create and cut your design
Search for your favoured patterns and send them to the cutting machine. Switch
on the machine and start to cut your design.
Weed the extra parts
Once your design is cut, you can weed away any part of the design you don’t
want to with a weeding tool (like tweezers, not included). Therefore, only
what you want is left on the clear protective film.
Heating/Iron on
Check whether the target object is suitable for the heat press machine or
electric iron before ironing. Please do a test ironing using a small piece of
vinyl pattern to test the temperature and pressure before DIY.
Peel off the clear protective film
- Peel the clear protective film after your design is warm or cool (better to peel it when it’s warm). If the design lifts, replace the protective film on the design for another 10 seconds of ironing.
- After peeling, flip your textile inside out and heat it for 3-5 seconds to ensure a more stable application.
It’s ready for wear or use if the pattern is applied well.
- There’s no better way to add variety and personalization to your belongings than with these vinyl decals, which can be applied to clothes, shoes, hats, bags, and cases.
- Use patterns and different colours to add extra spice to your life!
Clean Instruction
- Wait at least 24 hours before washing.
- Always wash your clothes inside out.
- Hang to dry.
- Do not tumble dry.
- Do not dry clean.
- Do not bleach.
Applications
- The heat transfer vinyl is suitable for textiles, leather, non-woven fabrics,
- Oxford cloth, bags etc.
Storage
- Keep away from kids.
- It is suggested to store at a temperature of -10 °C -50 C.
FAQs
- Q: It won’t cut nor weed well.
- A: Check the depth of the cutting blade and weed the extra parts of the design with a weeding tool (like tweezers, not included).
- Q: The pattern can not be printed on my clothes.
- A: Make sure you iron on the right surface (with clear protective film facing up).
- Q: The clear protective film is hard to peel off.
- A: The heat press machine or electric iron may be set to a low temperature. Please try again after slightly increasing the temperature.
- Q: The pattern doesn’t stick well after ironing on.
- A: Replace the protective film on the design for another 10s ironing. After peeling, flip your textile inside out and heat it for 3-5s.
- Q: The printed pattern has wrinkles.
- A: The heat press machine or electric iron may be set to a high temperature. Please try again after slightly decreasing the temperature.
- Q: The pattern comes off after washing.
- A: Wait at least 24 hours before washing. Always wash inside-out and hang to dry.
- Q: The received heat transfer vinyl creases or there are bubbles on the surface.
- A: Contact us at any time and we’ll reply as soon as we can. If it doesn’t meet your expectations, a free replacement is on its way.