Ohuhu A1YOOO Peofessional Microphone Stand User Guide
- June 14, 2024
- Ohuhu
Table of Contents
Ohuhu A1YOOO Peofessional Microphone Stand
Product Contents
1 Pack
1 x Microphone Stand
2 x Mic Clip Holder
2 Pack
2 x Microphone Stand
4 x Mic Clip Holder
Assembly Instruction
-
Remove the microphone stand from the packaging box.
-
Unfold the tripod legs and adjust them to stand on the floor stably.
-
Unscrew the knob ➀, then stretch the main post ➆ to a desired height. Lock the position by tightly screwing the knob ➀.
-
Counterclockwise rotate the sheath ➂ , then adjust the extension tube ➇ to a proper height. Lock the position by tightening the sheath.
-
Unscrew the clutch ➃ to adjust the height and angle of boom arm ➈. Screw it to tighten the clutch.
-
Unscrew the knob ➄ , then slide the boom arm ➈ for a desired horizontal placement. Lock the position by tightly screwing the knobl.
-
Rotate the boom arm ➈ to a proper direction.
-
Remove the adapter ring on the end ➅ to reveal mic connector (show as picture) then load the mic clip (s). Rotate the mic clip to adjust the angle of microphone.
-
The mic stand provides two clip-on cable holders ➁ to keep cords neatly and prevent frustrating tangles or potential damage.
Thank you for purchasing From