Insta360 B0CMV1WF7R GPS Preview Remote Instruction Manual
- June 17, 2024
- Insta360
Table of Contents
Insta360 B0CMV1WF7R GPS Preview Remote Instruction Manual
Overview
A. Shutter Button
B. Power Button
C. Touch Screen
D. Speaker
E. Charging Points
**Wrist Strap
Universal Strap
**
Charging
Put the remote on the charging base, ensuring that the charging points are in full contact. Then, connect the charging base to the charger and the power supply. An indicator will appear on the touch screen to confirm the remote is charging.
Note:
- Please use a 5V/1.5A power adapter to charge the Remote.
- Keep the remote and the charging base clean and dry.
Installation
**Installed to a wrist
**
Fit the remote into the Wrist Strap. Ensure the button is in the correct position, then wear on your wrist.
**Installed to a selfie stick
** Install the Remote into the Universal Strap. Ensure the button is in the correct position when fitted. Use the remote together with the Selfie Stick.
Installed on to a bike / motorcycle
Install the Remote into the Universal Strap. Then, fit accordingly to the
handlebar of your bike or motorcycle as needed.
How to Use
Power on / off
When powered off, long press the power button to turn on the remote.
When powered on and with the camera disconnected, long press the power button
to turn off the remote. When powered on and with the camera connected, long
press the power button to select from the three options: turn off the remote,
turn off the camera, or turn off both.
Connecting and Waking up the Camera
Connecting the camera
- Long press the power button to turn on the Remote.
- Press the power button on the camera to turn it on.
- Click “Insta360 GPS Preview Remote” on the camera’s Bluetooth Remote interface. When the camera’s screen displays Connected, it has been paired successfully.
Important:
- Be sure that your camera’s firmware has been updated to the latest official version.
- The remote can be used up to 26.2ft (8m) for effective preview and 65.6ft (20m) for effective control in optimal conditions.
- For support of cameras, please stay tuned for Insta360’s official website and its future firmware updates of the remote.
- After connecting to the remote for the first time, the device can wake up the camera within its effective range without repeating any pairing steps.
Connecting and using multiple cameras
To connect with another camera, swipe down from the top of the remote’s watch
dial to enter the connecting interface and tap . The remote will be ready to
pair. Enter the Bluetooth Remote feature on your camera and connect to the
remote. To connect with more cameras, repeat the process.
Notes:
- The remote can control up to 4 cameras at a time. Note that the camera recognizes only one remote at a time.
- When connected with multiple cameras, the Remote will only show the quantity of the connected cameras and won’t display other states.
Wake up a Camera
Use the remote to wake up your camera. After connecting to the camera for the
first time, swipe down on the remote’s touchscreen to enter the connection
interface, and choose one of the following two ways to wake up the camera:
Connect: Wake up the last connected camera. The camera will automatically
connect to the remote once powered on.
QuickCapture: Wake up the last connected camera. The camera will
automatically connect to the remote and enter QuickCapture.
Notes:
- Ensure to activate “Bluetooth Wakeup” on the camera before trying this feature.
- If connected with multiple cameras, the remote cannot perform wake up on any camera.
- To use QuickCapture, make sure it is enabled on your camera.
- Press the remote’s Shutter Button once to enter QuickCapture. Long press the Shutter Button to connect to the camera
Control the Camera
When the camera is connected, operating on the screen of the remote or
pressing its buttons to control the camera.
Preview Page
When the camera is connected, the remote will display thecamera’s
corresponding information on the preview page.
- Camera capacity
- GPS signals
- Battery level of the camera
- Preview page
- Shooting mode
- Shooting specifications
Switch shooting modes
On the touchscreen: swipe left or right on preview page to switch shooting
modes. Power button: Press the power button repeatedly to switch shooting
modes
Shooting specifications
In the preview page, tap the shooting specifications button or swipe from the
bottom upwards to enter shooting specifications page to set any preferred
parameters.
A Parameters
In preview page, swipe from right to left to enter the 3A parameter page and
to set further parameters.
Take photos or videos
In the preview page, press the shutter button on the remote to take a photo or
start recording, then press the shutter button again to stop recording
Application Center
Dashboard, Compass
Swipe left or right on the watch dial of the remote touchscreen to enter
Dashboard, Compass or Settings.
Settings
You will find the following in Settings: Display and Brightness, Direction of
Display, Sound, Time, Language, About and Factory Data Reset.
Firmware Update
Access Insta360 App > Settings > Update, then connect to the remote. If there is new firmware, an update note will pop up. Please update the remote according to the instructions on the App
Specifications
Model: CINSAAVG|
---|---
Wrist Strap| Band fits 140–210mm wrists.
Diameter of Universal Strap| 2cm ~ 3.5cm
Work environment| -20℃ ~ 40℃ (-4°F to 104°F)
Charging environment:| 0℃ ~ 40℃ (32°F to 104°F)
Waterproof| IP68 (up to 4.9ft for 0.5hours)
Battery Capacity| 950mAh
Bluetooth| Protocol: 5.0 Operation Frequency: 2402~2480MHz Output Power
(E.I.R.P.)
Safety Information
- This product contains magnets. Keep it away from pacemakers and other devices to avoid interference.
- The product only should be used in temperatures from -4°F to 104°F (-20°C to 40°C).
- If the product is not used for a long time (e.g. 2 months or longer), the battery may be depleted. Please charge the product fully, then turn it on.
- Do not drop or strike the product. Do not place heavy objects on the product, as this will cause damage.
- Do not leave the product near heat sources such as a furnace or heater. Do not leave the product inside of a vehicle on hot days.
- Wipe the product dry as soon as possible after contact with water. Do not wear it when swimming or diving.
- Do not use any liquid cleansers on the product. Do not wipe the charging points on the remote with liquid detergent, as these may corrode and rust, affecting the remote. Only use a soft dry cloth to clean the product
Disclaimer
Please read this Disclaimer carefully. Using this product means that you acknowledge and accept the terms of this disclaimer. By using this product, you hereby acknowledge and agree that you are solely responsible for your own conduct when using this product and any consequences thereof. You agree to use this product only for proper and lawful purposes. You understand and agree that Arashi Vision Inc. (hereinafter referred to as ‘Insta360’) accepts no liability for any and all misuse, consequences, damages, injuries, penalties, or any other legal responsibility directly or indirectly incurred by your using this product and associated accessories. Before every use, make sure that your accessories are functioning properly. If there’s any damage or irregularity, stop using them immediately. Within the scope of state laws and regulations, Insta360 reserves the right of final explanation and revision for the commitment.
After-Sales Service
The warranty period of the attached product is 1 year from the original retail purchase. Warranty service may vary according to the applicable laws of your state or jurisdiction. For detailed warranty policies, please visit https://insta360.com/support.
References
- Insta360 | Action Cameras | 360 Cameras | VR Cameras
- Insta360 | Action Cameras | 360 Cameras | VR Cameras
- Insta360 - Support
- Insta360 | Action Cameras | 360 Cameras | VR Cameras
- EU DECLARATION OF CONFORMITY - Insta360