SGS BeNice Peel and Stick Backsplash Large Bathroom Subway Tiles User Manual

June 17, 2024
SGS

SGS BeNice Peel and Stick Backsplash Large Bathroom Subway Tiles

Product Information

Specifications:

  • Product Name: PVC Peel and Stick Wall Tiles
  • Manufacturer: Foshan Nanhai Lewei Decoration Materials Limited Company
  • Origin: Foshan City, Guangdong Province, China

Product Usage Instructions

Installation:

  1. Clean the wall surface thoroughly to ensure it is free from dust and debris.
  2. Peel off the backing of the wall tile to expose the adhesive side.
  3. Press the tile firmly onto the wall surface, ensuring proper alignment.
  4. Repeat the process for each tile, leaving a small gap between tiles for expansion.

Maintenance

  1. Regularly wipe the tiles with a damp cloth to keep them clean.
  2. Avoid using harsh chemicals or abrasive materials that may damage the surface.

Removal:

  1. To remove the tiles, gently peel them off the wall surface starting from one corner.
  2. Clean any adhesive residue left on the wall using an adhesive remover.

Frequently Asked Questions (FAQ):

  • Q: Can these tiles be used in wet conditions like bathrooms?
    A: Yes, these PVC peel-and-stick wall tiles have resistance to wet conditions according to EN 438-2:2016 Clause 15.

  • Q: How do I know if the tiles are suitable for water vapour exposure?
    A: The resistance to water vapour test is conducted for 1 hour, and the tiles are rated based on their appearance and edge conditions according to EN 438-2:2016 Clause 14.5 and Clause 15.5.2.2 & 15.5.2.3 respectively.

Foshan Nanhai Lewei Decoration Materials Limited Company FOSHAN CITY, GUANGDONG PROVINCE, CHINA
The following sample(s) was/were submitted and identified on behalf of the client as:

  • Sample Description: PVC PEEL AND STICK WALL TILES
  • Sample Receiving Date: Oct.29, 2019
  • Test Performing Date: Oct.29, 2019 to Nov.06, 2019

Test Result Summary

No.| Test item| Test(s) Requested(Method)| Result(s)| Comments
---|---|---|---|---
1| Resistance to water vapour| EN 438-2:2016 Clause 14| Refer to next page(s)| /
2| Resistance to wet conditions| EN 438-2:2016 Clause 15| Refer to next page(s)| /
For further details, please refer to the following page(s)

Signed for and on behalf of
Shunde Branch
SGS-CSTC Co., Ltd. Peter Zhao
Approved signatory

Test Information

Sample description: See photo

  1. Test item: Resistance to water vapour
    Test method: EN 438-2:2016 Clause 14
    Test condition:
    Exposed to the water vapour: 1h

Test result:

Test result Conclusion
Rating 5 /

Note : Surface rating scale refers to EN 438-2:2016 Clause 14.5, as follows:

Appearance rating scale Appearance
Rating 5 No visible change.
Rating 4 Slight change of gloss and/or colour, only visible at certain

viewing

angles.

Rating 3| Moderate change of gloss and/or colour.
Rating 2| Marked change of gloss and/or colour.
Rating 1| Blistering and/or delamination.

Photo Appendix

  • Test item: Resistance to wet conditions
    Test method: EN 438-2:2016 Clause 15
    Test condition:

    1. Immerse the test piece in water with(65±2)℃ for 48 h;
    2. Then immerse the test piece in water with(23±2)℃ for 15 min.

Test result:

Test result Conclusion
Surface rating scale 5

/

Edge rating scale| 5

Note : Rating scale refers to EN 438-2:2016 Clause 15.5.2.2 & Clause 15.5.2.3, as follows:

Surface rating scale

Rating 5| No visible change.
Rating 4| Slight change of gloss and/or colour, only visible at certain viewing angles.
Rating 3| Moderate change of gloss and/or colour.
Rating 2| Marked change of gloss and/or colour or surface

blistering.

Rating 1| Surface layers delamination.
Edge rating scale

Rating 5| No visible change.
Rating 4| Slight hairline edge cracks visible to the naked eyes.
Rating 3| Moderate edge cracks.
Rating 2| Severe edge cracks.
Rating 1| Core layers delamination.

Photo Appendix:

Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sqs.coin/en/Terms-afid-Cohditions.aspx and, for electronic format documents. subject to Terms and Conditions for http://www.sqs.coin/en/Terms-afid-Cohditions.aspx Attention is drawn to the limitation Of liability, indemnification and on issues therein. document s advised that information contained hereon reflects the Company’s findings at the time Of its intervention only and within the limits Of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval Of the Company. Any unauthorized alteration. forgery or falsification Of the content or appearance Of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of the testing/inspection report & certificate, please contact us at 8307 1443, or email: CN.Doccheck@sgs.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals