weka 102 Garden House Premium28 Natural Instruction Manual
- June 17, 2024
- weka
Table of Contents
weka 102 Garden House Premium28 Natural
Product Information
Specifications
- Series: 102 / 104 / 106
- Model: Stand 2313
- Manufacturer: weka Holzbau GmbH
- Guarantee: 5-year guarantee for design and processing quality
Product Usage Instructions
Pre-Assembly Recommendations:
Before beginning assembly, ensure you have a completely level and square foundation. Obtain a foundation plan from your specialist dealer and familiarize yourself with the wall structure of your building type.
Tools Required
- Drill
- Electric screwdriver
- Hammer
- Chisel
- Rubber mallet
- Utility knife
- String
- Water level
Assembly Steps
- Start by laying out all the parts according to the assembly instructions.
- Follow the detailed instructions provided in the accompanying manual for precise assembly steps.
- Ensure that all connections are secure and tight to prevent any structural issues.
- Seal window/door panes with transparent silicone immediately after assembly for weather resistance.
- Be cautious when laying roof boards to allow for wood swelling due to moisture.
Maintenance Recommendations
Regularly inspect the structure for any signs of damage or wear. Apply wood protection measures as needed to maintain the integrity of the product.
Frequently Asked Questions
- Q: What should I do if I encounter color changes or cracks on the product?
- A: Color changes, crack formation, warping, or similar alterations are normal for outdoor use and are not covered under the guarantee. Regular maintenance and protective measures are recommended to prolong the lifespan of the product.
- Q: How do I claim a guarantee for faulty parts?
- A: To claim a guarantee for faulty parts, ensure you have the original packing list and proof of purchase. Contact weka Holzbau GmbH within the guarantee period for further assistance on part replacement.
Dear customer Thank you very much for choosing a weka product.
Read these instructions through completely before assembling your product in
order to avoid errors in assembly or damage.
IMPORTANT
Please use the enclosed packing list to check immediately that your weka
product has been delivered complete and intact. Please do not dispose of the
packing list before the guarantee period has expired. This list enables you to
check that all the individual parts are present. It should be retained along
with the proof of purchase. Any complaints which may arise can probably be
easily rectified with this list. The item numbers on the packing list do not
correspond to the item numbers in the following assembly instructions.
We recommend that 2 people carry out the assembly. In order to prevent
accidents, we recommend that children are kept out of the direct vicinity
during assembly. We reserve the right to make further technological
developments. This means that there many be minor deviations in the
illustrations. Please do not simply throw away the packaging material. Paper,
card and corrugated board as well as plastic packaging materials should be
placed in the correct collection containers.
Recommendations
A prerequisite for successful assembly is an absolutely level and square
foundation.
A foundation plan can be obtained from your specialist dealer.
In order to avoid rising damp, we recommend that a barrier layer using the
packaging film, roofing paper or similar be laid between the foundation and
the floor beams. Roofing paper for a barrier layer is not included in the
scope of this delivery. The structure should be anchored to the foundation to
protect against wind damage. Concrete anchors or steel angles obtainable from
specialist suppliers are suitable for anchoring the floor beams to the
foundation. The anchors are not included in the scope of this delivery. Please
drill pilot holes for all screw connections to avoid damaging the wood. The
following symbol in the instructions will indicate when this is necessary:
You will find the wall structure of your special building type on the sheet
accompanying these instructions. You will also find the packing list in the
wall packages.
The pallet on which the structure is transported comprises 2 floor beams which
are required for the assembly of the structure and 2 distance timbers which
are only packaging material and can be disposed of. The intermediate spaces
between the floor beams guarantee the necessary subfloor ventilation for the
house. Fit the wall boards together, with the tongue pointing upwards. If
necessary, use a rubber mallet, where the assembly timber will prevent any
damage to the tongue. The assembly timber can be found in the front wall
package. In order to check the right angles, measure the diagonals and make
any necessary corrections until you obtain equal values. The wall boards are
laterally interchangeable. With the relevant building type, you can fit the
door in the left or in the right half of the front wall. The door will always
open to the right. If the roof is asymmetrical, ensure that the door will
always open with no trouble by locating it under the gable peak!
The ceiling battens attached to the door frame (under no circumstances to the
wall boards) ensure a clean transition from door frame to the wall boards.
When laying the roof boarding, care should be taken to ensure that the roof
boards are not pressed tight into each other. Subsequent swelling of the wood
as a result of moisture occurring is unavoidable. The window/door panes must
be sealed all round with transparent silicone for windows immediately after
assembly and painting to ensure full resistance to driving rain.
Techn. Änderungen vorbehalten!
Alle Maßangaben sind ca. Maße 4
Copyright HRB 3662
The threaded rods of the wind safety device are only tightened by hand. Ensure
that the helical springs remain released while the rods are installed.
Otherwise extreme rainfall may lead to interior leaks which cause
discoloration and damage to the wood. The manufacturer will accept no
liability for such damage, there will be no replacement within the scope of
the guarantee nor is it covered by the manufacturer’s warranty. We therefore
refer you again to our guarantee conditions at this point.
Wood protection The product is made from natural timber, for which regular and
adequate wood preservation measures are obligatory. Please contact a wood
preservation expert for information on professional preservation measures.
Wood preservation is to be carried out by the customer at his own risk. No
guarantee can be given in the event of wood preservation not carried out in
accordance with the instructions. Please also note the provisions relating to
this in our guarantee. We wish you much pleasure with your wood product.
Guarantee conditions
weka Holzbau GmbH provides you with a 5-year guarantee for design and
processing quality. Within the guarantee time, faulty parts will be replaced
free of charge. Costs arising as a result of the exchange are not included in
the guarantee claim. Guarantee claims may only be made in conjunction with the
original packing list and proof of purchase.
Excluded from the guarantee are defects caused by: – improper subsoil and
foundations – assembly not carried out in accordance with these instructions –
snow load in excess of 0,75 kN/m² – your own alterations to the product –
defective care in the maintenance of the current wood quality – prevailing
winds in excess of force 7 (stiff wind) · Inland, consequences such as the
movement of whole trees and any noticeable impedance when walking in the open
air are to be observed. No defects due to these conditions will give rise to a
guarantee. – Natural catastrophes or other violent occurrences.
Fluctuations in colour, crack formation, warping or similar changes which are
completely normal outdoors are no grounds for making a claim.
Further claims and consequential damage do not fall under the guarantee
regulations. Our General Terms and Conditions apply.
You should have the following tools to hand before beginning assembly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>