Havit HAKIIWINDII Smart Bluetooth Glasses Headset User Manual

June 14, 2024
havit

Havit logoHavit HAKIIWINDII Smart Bluetooth Glasses
Headset

HAKIIWINDII Smart Bluetooth Glasses Headset

POWER ON:

  • Long Press the “M” button 2 seconds turn on/off, blue led flashed when power on, Voice prompts “Power on”; Red led flashed when power off, Voice prompts “Power off”
  • Automatically enter pairing mode after power on (red and blue lights flash alternately), search HAKII WIND II for pairing on Bluetooth device After connnected the blue light flashes every 3 seconds, when disconnected it will back to paring mode. when power on it will automatically connect to the last Bluetooth device. automatically turn off when there no Bluetooth connection in 5 minutes

AUDIO MODE:

  • One tap the “V” button volume up, prompt sound in maximum volume
  • Long press “V” button volume down
  • One tap “M” button to Play/Pause

CALL MODE:

  • One tap “M” to answer phone call
  • One tap “V” to Reject phone call
  • One tap “M” to hang up
  • Press “V” to answer new phone call and Hangup currently phone call

VOICE ASSISTANT: Double tap “M” button

CHARGING MODE:

  • Charging time about 40 min, battery low alarm with voice prompt “battery low”.
  • The low battery alarm interval 60 seconds. The red light flashes twice. The red led on when charging, the blue led on when fully charged.
  • Unable to power on while charging.

Accessories:

Glasses storage box
Charging Cable
Fiber glasses cloth

SPECIFICATION

Havit HAKIIWINDII Smart Bluetooth Glasses Headset -
overview

  • Model HAKII WIND II
  • Frequency range 2402-2480MHZ
  • Bluetooth Protocol HSP/HFP/A2DP/AVRCP
  • Play time about 6h
  • Charging volt USB DC5V
  • Standby time 230h
  • Weight About 40g
  • Bluetooth Version V5.2+EDR
  • Transmission level Class2
  • Distance 10-15M
  • Talk time about 5h
  • Charging time about lh
  • Battery 1.50mAh

LENS SWITCHING GUIDE

STEP 1
Find the location of the lenses and nose pad buckles
Havit HAKIIWINDII Smart Bluetooth Glasses Headset - step
1 STEP 2
press one side of the nose pad inward to leave space, so thot one side of the nose Pad track is separated from the lens, and then the other side can be seporated easily
Havit HAKIIWINDII Smart Bluetooth Glasses Headset - step
2 STEP 3
pull the separated lens downwards
Havit HAKIIWINDII Smart Bluetooth Glasses Headset - step
3 STEP 4
Remove the replacement lenses from the lens accessory box
Havit HAKIIWINDII Smart Bluetooth Glasses Headset - step
4 STEP 5
Fit the lens into place through the track and press firmly to return the lens to the nose pad track
Havit HAKIIWINDII Smart Bluetooth Glasses Headset - step
5 REMOVE THE PROTECTIVE FILM FROM THE LENSES BEFORE USE

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,  pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

Havit logoltem model number: HAKII WIND II
Product Name: Smart bluetooth glasses headset
Executive standard: Q/HAVIT 004-2018
Manufacturer: Guangzhou Havit Technology
Company Limited
Distributor: Guangzhou HAKII Technology Co., Ltd.
Address: Room 1308, No. 1000, Xingang East Road,
Haizhu District, Guangzhou (office only)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

havit User Manuals

Related Manuals