artika PDT-GL LED Luminairep Instruction Manual

June 3, 2024
artika

Model: PDT-GL
LED Luminairep
INSTRUCTION
MANUAL
IMPORTANT: READ
CAREFULLY AND KEEP.

artika PDT-GL LED Luminairep

PDT-GL LED Luminairep

Made in China
Residential use only
Indoor use only

INCLUDED HARDWARE

ITEM DESCRIPTION QUANTITY
Wall anchor Ancrage mural Anclaje mural x 2
Mounting bracket Support de montage Soportze de montaje × 1
Retaining screw Vis de fixation Tornillo de fijación x 2
Junction box screw
Vis de boitier de raccordement Tornillo de caja de conexiones × 2
Wire connector Capuchon de connexion Conector de cable × 3
Canopy screw Vis de la base Tornillo del dosel × 2

+ 1 extra
| Light LED pendant Suspension à DEL Luminaria LED suspendida| × 1
| Set screw
Vis de réglage Tornillo de fijación| × 3
+ 1 extra
| Small screwdriver Petit tounevis Destornillador pequeño| × 1

STEP-BY-STEP INSTALLATION

artika PDT-GL LED Luminairep - 1

WHAT YOU WILL NEED|
---|---
Screwdriver|

CAUTION
WARNING:

Risk of electrical shock. Turn off the breaker at the panel.
Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance.
Do not use outdoors.
CAUTION
If using a dimmer, it must be LED-compatible.
IMPORTANT
The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty.
We recommend that this product be installed by a certified electrician. In some states or provinces, it is a legal requirement for this type of product to be installed by a certified electrician, according to the electrical and building codes effective in the region where the unit is used.

HEIGHT ADJUSTMENT

NOTE: It is recommended to make any major adjustments to the height of the light fixture before installation.

artika PDT-GL LED Luminairep - 2

MOUNTING BRACKET INSTALLATION

artika PDT-GL LED Luminairep - 3

MOUNTING BRACKET INSTALLATION

artika PDT-GL LED Luminairep - 4

CONNECTING THE WIRES AND INSTALLATION OF THE CANOPY

artika PDT-GL LED Luminairep - 5

FINAL INSTALLATION

artika PDT-GL LED Luminairep - 6

REPLACEMENT PARTS

Description Artika #
General Hardware Kit WAIT

TO ORDER REPLACEMENT PARTS, PLEASE CONTACT CUSTOMER SERVICE.
CANADA (IC)
Operation is subject to the following two conditions:

  1. this device does not cause interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

USA (FCC)

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1.  this device does not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

NO T E: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Artika For Living Inc.
1756, 50
Avenue
Montréal (Lachine), Québec
Canada H8T 2V5
1-866-661-9606
support@artika.com
www.artika.com
Customer Service
Monday to Friday
9 am – 5 pm EST

Documents / Resources

| artika PDT-GL LED Luminairep [pdf] Instruction Manual
PDT-GL, PDTGL, 2AYFP-PDT-GL, 2AYFPPDTGL, PDT-GL LED Luminairep, PDT-GL, LED Luminairep, LED Luminaire, Luminaire
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals