make It real 1709 Snackers Bracelet Kit Vending Machine Instructions
- June 17, 2024
- make it real
Table of Contents
1709 Snackers Bracelet Kit Vending Machine
Product Specifications
- 5 charms
- 223 assorted beads
- 1 surprise ring
- Model Number: 1709-INSINT-01-V1
Product Usage Instructions
Before You Begin
Make sure you have all the components ready before starting.
Make a Bracelet
- Measure a 30cm (12in) cord.
- Attach the cord to your working surface using adhesive tape.
- Thread the beads and charms onto the cord following the provided sequence.
- Create a double knot using the ends of the cord. Secure the knot with craft glue or clear nail polish.
- Allow 5 minutes for the glue to dry, then trim the excess cord.
- Repeat steps 1 to 5 to create more bracelets following the provided patterns.
Tips
Before wearing the bracelets, gently tug on them to ensure they are securely fastened. Avoid submerging the bracelets in water.
Video Tutorial
For video instructions, visit: [Insert video tutorial link here]
FAQ
-
How many charms and beads are included in the kit?
The kit contains 5 charms and 223 assorted beads. -
How do I secure the knots on the bracelets?
Use craft glue or clear nail polish to secure the knots, allowing them to dry for 5 minutes before trimming the excess cord. -
Can the bracelets be worn in water?
It is recommended to avoid submerging the bracelets in water to preserve their quality.
For more information and updates, visitmakeitrealplay.com
CONTAINS
- 5 charms
- 223 assorted beads
-
1 surprise sticker
-
1 surprise ring
-
1 clear elastic cord 2 m (2.2 yd)
LEGEND
-
Scissors
-
Adhesive tape
-
Clear nail polish
-
Repeat
-
Ruler
Not included
BEFORE YOU BEGIN
Read the instructions all the way to the end before starting your project. Have fun!
MAKE A BRACELET
- Open the pouch to reveal the contents.
- Measure and cut 30 cm (12 in) of clear elastic cord.
- Attach the cord to your working surface with a piece of adhesive tape.
- Thread the beads and charm onto the cord following the sequence shown.
-
Make a double knot using the ends of the cord. Secure the knot by covering it with a drop of craft glue or clear nail polish. Allow 5 minutes to dry, then cut off the excess length of cord after the knot.
-
Repeat steps 1 to 5 to make 4 more beaded bracelets following the patterns below.
TIP
Before wearing the bracelets, gently pull on them to make sure they are
well secured. Avoid soaking the bracelets in water.
For video instructions go to:
makeitrealplay.com
WARNING!
- CHOKING HAZARD
- small parts. Not suitable for children under 3 years. STRANGULATION HAZARD
- Functional long cord – Adult supervision required.
- CAUTION: Stickers not intended to be placed on skin. Please retain the instructions since they contain important information.
ABOUT COMPANY
- MAK EIT REAL
- 1700 Reisterstown Rd Ste 211
- Pikesville, MD 21208 USA
- 410-995-8685
- Jactin House, 24 Hood Street
- Ancoats, Manchester, M4 6WX UK
- +44 (0) 161302 4100
- EU Responsible Person (Cosmetics)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>