make it real B08WFS9411 Summer Vibes Heishi Bead Set Instructions

June 4, 2024
make it real

make it real B08WFS9411 Summer Vibes Heishi Bead Set

WHAT’S INSIDE

  • EN PlayTray

  • EN big metallic ring

  • EN heishi beads

  •  colors of embroidery thread 2 m (2.2 yard) each

  • EN threader

  • EN charms

  • elastic cord 2 m (2.2 yrd)

  • lobster clasp with jump ring

You will need

LEGEND

  • Scissors

  • Tijera

  • Ruler

  • Regla

  • Adhesive tape

  • Craft glue

  • Clear nail polish

  • Let dry

  • Knot

  • Double knot

  • Repeat

  • To braid

READ THE INSTRUCTIONS ALL THE WAY TO THE END BEFORE STARTING YOUR PROJECT.

  • Install the PlayTray by taping it to a flat surface as shown. Ask an adult for permission before taping the surface.
  • (Optional) Place your phone in the media slot and follow the instructions on the Make It Real app.
  • EN Create a bead pattern in the PlayTray bead holder.
  • Organize the beads.
  • Attach the string to the tab for easy braiding.

HEISHI BEAD BRACELETS

You will need

make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-
Set-13

  • Cut 35 cm (13 ¾ in) of elastic cord.

  •  Line up the beads on the PlayTray following the sequence shown and thread the beads on to the cord.
    make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-
Set-16

  • Attach one end of the elastic cord to the PlayTray with a piece of tape.

Tip: Mix up the beads to create your own pattern!

  • Remove the bracelet from the PlayTray.
    Tip: hold both ends securely so the beads do not fall off.

  • a. Make a double knot using the ends of the cord.

  • b. Secure the knot with a drop of craft glue or clear nail polish, wait 5 minutes for it to dry and cut off the excess cord.make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-Set-19

  • Repeat steps 1 to 5 to make the other Heishi Bead Bracelets.make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-Set-20

  • Attach the charms to decorate the bracelets.make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-Set-21

BRAIDED BRACELET

You will need

make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-
Set-22

  • Cut 50 cm (19 ¾ in) of elastic cord.

  • Fold it in half.

  • Pass the fold through the metallic ring to make a loop.

  • Pass the ends of the cord back through the loop and tighten it against the ring.

Tip: Use the threader to thread the beads if needed.

make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-
Set-26

  • Thread the beads on to the cords following the sequence shown.
    make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-
Set-27

  • Make 2 simple knots after the last heishi bead and set aside.
    make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-
Set-28

  • Take all the threads together and fold them in half.

  • Pass the fold through the metallic ring to make a loop.

  • Separate the threads in three equal parts.
    make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-
Set-32

  • Braid until you reach 13 cm (5 1/4 in).
    make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-
Set-33

  • Take one of the hot pink threads and make a simple knot at the end of the braid.

  • Wrap the hot pink thread 10 times around all the embroidery threads and the elastic cord.

  • Make 2 simple knots.

  • Secure the knot with a drop of craft glue or clear nail polish.make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-Set-36

  • Secure the elastic cord in place by making 2 simple knots.

  • Apply a drop of craft glue or clear nail polish on the knot and cut the excess elastic cords.make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-Set-37

  • Split the embroidery cords in two equal parts.make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-Set-38

  • Make 2 braids of 10 cm (4 in).

  • Finish them both with a simple knot.

  • Secure the knot with a drop of craft glue or clear nail polish, wait 5 minutes for it to dry and cut off the excess cord.make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-Set-39

  • Close the bracelet by tying a double knot around the ring using the two braids.make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-Set-40

TWISTED BRACELET

  • You will need
    make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-
Set-41

  • 1 piece of 1 m (1.1 yrd) of each color of embroidery thread.

  • Take all the threads together and fold them in half.

  • Pass the fold through the metallic ring to make a loop.

  • Pass the ends of the threads back through the loop and tighten them against the ring.

  • Separate the threads in two equal parts.

  • Twist each group of threads tightly for their whole length.

  • Twist both groups together until the main twist measures 15 cm (6 in).
    make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-
Set-48

  • Take one of the hot pink threads and make a simple knot at the end of the main twist.

Tip: Make sure you don’t let go of the ends so the threads don’t unwind.

  • Wrap the hot pink thread 10 times around all the threads and through the jump ring attached to the lobster clasp.

  • Make 2 simple knots and secure the knot with a drop of craft glue or clear nail polish, wait 5 minutes for it to dry and cut off the excess cord.
    make-it-real-B08WFS9411-Summer-Vibes-Heishi-Bead-
Set-50

  • Cut the excess threads 2 cm (¾ in) after 2 simple knots.

  • Close the bracelet with the lobster clasp.

WARNING
CHOKING HAZARD – small parts. Not suitable for children under 3 years. STRANGULATION HAZARD – Functional long cord – Adult supervision required. This toy contains functional sharp points.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

make it real User Manuals

Related Manuals