GTR SIMULATOR RS30 Ultra Force Feedback Racing Wheel User Manual
- June 17, 2024
- GTR SIMULATOR
Table of Contents
RS30 Ultra Force Feedback Racing Wheel / V3 Pro Pedals User Manual
Please read all the instructions prior to use
Parts Included:
A: RS30 Steering Wheelbase
B: RS30 Steering Wheel
C: Mounting Clamps
D: Power Supply Cord
E: V3 Pedals
STEP 1.
STEP 2.
STEP 3.
RS30V3 Wheel & Pedals Calibration Steps
Step 1:
Once USB is plugged in, press the [up] + [down] + [x] button simultaneously.
Step 2:
The LED light on the wheel will start blinking and it will enter calibration
mode.
Step 3:
Turn the wheel all the way to the left and right, then press the gas pedal all
the way down and release, then press the brake pedal all the way down and
release.
Step 4:
Press the [view] + [menu] button simultaneously to exit calibration mode The
final step, unplug and replug the USB. The pedal should work again.
We should have calibrated the pedal prior to sending it to you, but we will
double-check on our end.
WINDOWS 11: hold view/menu for a few seconds in Windows 11 to make sure it
shows up as a controller
For more info, please visit: gtrsimulator.com/support/