OREGON S59 Chainsaw Chain User Guide
- June 17, 2024
- Oregon
Table of Contents
OREGON S59 Chainsaw Chain
Product Information
Specifications
- Bar Length: Measure exposed bar and round up to nearest even number
- Drive Link Count: Count all links on chain loop
- Gauge: Refers to the thickness of drive links and width of bar channel
- Pitch: Describes the size of the chain; measure between any three consecutive rivets, then divide by 2
Product Usage Instructions
Finding the Right Chain
To find the right chain for your chainsaw, follow these steps:
- Locate the brand and model number on your saw.
- Measure the exposed bar length and round up to the nearest even number.
- Count all the links on the chain loop to determine the drive link count.
- Determine the gauge by measuring the thickness of drive links and width of the bar channel.
- Calculate the pitch by measuring between any three consecutive rivets and dividing by 2.
3 Ways to Find Your Replacement Chain
- Gold ID Link: Refer to the replacement part number.
- Brand & Model No.: Identify your saw’s brand and model number and confirm bar length and drive link count.
- Drive Link Stamp: Locate the stamp on your old chain and match with the provided chart to find the corresponding chain type.
Low Kickback Chains
A low kickback chain is recommended for novice or infrequent chainsaw
operators to reduce the risk of accidents caused by sudden upward motions of
the guide bar. Follow proper cutting techniques to ensure safety.
FAQ
What is a low kickback chain?
A low kickback chain helps reduce the risk of sudden upward motions of the
guide bar during chainsaw operation, reducing the chances of accidents and
injuries.
SAW CHAIN REPLACEMENT PARTS GUIDE
INSTRUCTIONS
WE’RE HERE TO HELP YOU FIND THE RIGHT CHAIN.
BASIC TERMS & KNOW-HOW
-
BRAND & MODEL NO.
Brand and model number can be found on saw. -
BAR LENGTH
To find your length, just measure exposed bar. Round up to nearest even number. -
DRIVE LINK COUNT
To find number of drive links, count all the links on chain loop. -
GAUGE
The gauge of a chain refers to the thickness of its drive links and the width of the channel in the bar. -
PITCH
The chain pitch describes the size of the chain. Measure between any three consecutive rivets, then divide by 2.
3 WAYS TO FIND YOUR REPLACEMENT CHAIN.
- GOLD ID LINK
- BRAND & MODEL NO
- DRIVE LINK STAMP.
GOLD ID LINK
- If the chain you are replacing is an Oregon® product, there may be a Gold ID Link indicating the replacement part number.
- The Oregon® part number is boldly displayed in the red field on packaging.
BRAND & MODEL NO.
- STEP 1: Find your brand in this guide.
- STEP 2: Locate your chainsaw model under your brand. Your Oregon® replacement saw chain number is in red.
- STEP 3: Confirm bar length and drive link count.
DRIVE LINK STAMP
- STEP 1: Locate the drive link stamp on your old chain.
- STEP 2: Find your chain brand and your drive link stamped number. Your Oregon® saw chain letter is in red.
- STEP 3: Count your drive links.
LOW KICKBACK
-
Kickback is a term used to describe the sudden, upward motion of a chainsaw’s guide bar and is one of the most common causes of chainsaw accidents. If proper cutting techniques are not followed, the lightning-fast kickback of a chainsaw can be very dangerous and may result in serious injury.
-
Choosing a low kickback chain helps reduce kickback and is recommended for novice or infrequent chainsaw operators, or additional safety for anyone.
-
OREGON TOOL, INC. IS NOT AFFILIATED OR ASSOCIATED WITH ANY LISTED THIRD PARTY TRADEMARKS.
BRAND INDEX
BLACK+DECKER ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
---|---|---|---|---|---|---|---|---
ALLIGATOR LP 1000, LLP120| A42| 6″| 42| .050″| 1/4″| —| —| —
BECSP601| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —
BECS600| S52|
14″| 52| .050″| 3/8″ LP| —| 4921760| —
PP610| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —
LOG HOG, LH1600| S56| 16″| 56| .050″|
3/8″ LP| —| 4921764| —
CS1216| S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
CS1518| S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
CCS818, NPP2018, LCS120, LPP120| R34| 8″| 34|
.043″| 3/8″ LP| —| 4921756| —
LCS1020, LCS1020B| R40|
10″| 40| .043″| 3/8″ LP| —| 4900187| —
LCS1240| R45| 12″| 45| .043″|
3/8″ LP| —| 4900188| —
BLUE MAX ™| SAW CHAIN| BAR LENGTH| DRIVE
LINKS| GAUGE| PITCH| BAR/CHAIN COMBO| SAW
CHAIN PART N0.
| BAR/CHAIN COMBO PART N0.
MENCS18 (SILVER STEEL G4500)| J72| 18″| 72| .058″|
.325″| —| 3711413| —
CHICAGO ELECTRIC ™| SAW CHAIN CADENA| BAR
LENGTH| DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN
COMBO| SAW CHAIN PART N0.| BAR/CHAIN COMBO
PART N0.
67255| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
POLE SAW
68862| S33| 8″| 33| .050″|
3/8″ LP| —| 4921772| —
CORONA ™ CLIPPER| SAW CHAIN| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
POLE SAW
TP 400| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —
S45| 12″| 45| .050″|
3/8″ LP| —| 4921754| —
CRAFTSMAN ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
172.740500, S145, CMXGSAMNN4214, CMECS614, CMXGSAMY42N4|
S52| 14″| 52|
.050″| 3/8″ LP| 27856|
4921760
|
4921783
172.34120| S63| 18″| 63|
.050″| 3/8″ LP| —| 3654368| —
CMECS600, S160, CMXGSAMNN4216, CMXGSAMY42N6|
S56|
16″| 56| .050″| 3/8″ LP| 27857|
4921764
|
4921785
CMXGSAMY421S, S180, CMXGSAMY42N8| S62| 18″| 62| .050″|
3/8″ LP| —| 4921765| —
CMXGSAMY462S| H78| 20″| 78| .050″|
.325″| 577330| 4921763| 756153
MODEL NUMBERS BEGINNING WITH PREFIX 316.
34107| S55| 16″| 55| .050″|
3/8″ LP| —| 4921759| —
38188| H72| 18″| 72| .050″|
.325″| —| 4921768| —
35022| H78| 20″| 78| .050″|
.325″| 577330| 4921763| 756153
35084, 35085
INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.|
M72| 18″| 72| .050″|
.325″| 584408| 4921775| —
38070| S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
MODEL NUMBERS BEGINNING WITH PREFIX 358.‑
3407, 3411, 3412, 3425, 3445, 3455, 3476, 34094, 34101, 34102, 34104, 34106,
34108, 34109, 34111, 34114, 34115, 34116, 34117, 34118, 34124, 34140, 34150,
34180, 34181, 34190, 34195, 35006, 35008, 35018, 35024, 35026, 35027, 35028,
35036, 35037, 35038, 35044, 35046, 35048, 35056, 35058, 35060, 35066, 35067,
35080, 35081, 35082, 35083, 35087, 35088, 35093, 35099, 35104, 35106, 35108,
35114, 35115, 35116, 35117, 35118, 35134, 35136, 35138, 35144, 35145, 35146,
35148, 35156, 35158, 35160, 35161, 35170, 35171, 35180, 35181, 35182, 35190,
35191, 35198, 35202, 35203, 35205, 35206, 35207, 35215, 35216, 35218, 35231,
35235, 35238, 35263, 35266, 35267, 35268, 35269, 35270, 35273, 35280, 35281,
35283, 35363, 35366, 35367, 35504, 35505, 35506, 35508, 35512, 35514, 35515,
35516, 35618, 35623, 35624, 35718, 35723, 35736, 35802, 36010, 36012, 36013,
36015, 36017, 36018, 36026, 36028, 36036, 36038, 36068, 36069, 36080, 36082,
36083, 36085, 36087, 36088, 36218, 38160, 38170, CMXGSAMNN4214, CMXGSAMNN4216,
CMXGSAMY42N8| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —
S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP| 27857| 4921764| 4921785
S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
34119| S55| 16″| 55| .050″|
3/8″ LP| —| 4921759| —
35618, 35623, 35238, 41CY4218793| S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
35212, 35483, 35487, 35608, 35609, 35690, 35885, 35887, 35889| E60|
16″| 60| .050″| 3/8″| 27851| —| 2836361
E66| 18″|
66| .050″| 3/8″| 30159|
3848109| 3711368
E70| 20″| 70| .050″|
3/8″| 27850| 4921777| 4921784
E81| 24″| 81| .050″| 3/8″| —| —| —
35098
‡ CHOOSE THE REPLACEMENT PARTS IN THIS LINE ONLY IF THE ORIGINAL GUIDE BAR ON YOUR SAW BEEN REPLACED WITH AN OREGON REPLACEMENT GUIDE BAR AT THIS LENGTH.
‡ ELIGE LAS PIEZAS DE REPUESTO DE ESTA LÍNEA SOLO SI LA BARRA GUÍA ORIGINAL DE TU SIERRA FUE SUSTITUIDA POR UNA BARRA GUÍA DE REPUESTO OREGON DE ESTA LONGITUD.
| E70| 20″| 70| .050″|
3/8″| —| 4921777| —
E72| 20″ ‡| 72|
.050″| 3/8″| 510124| 4921773| —
35607, 35119, 35628| H72| 18″| 72| .050″|
.325″| 36892| 4921768| —
35020, 35021, 35120, 35121, 35492, 35633, CMXGSAMY462S|
H78| 20″| 78| .050″|
.325″| 37977| 4921763| 96403
38180
INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.|
M72| 18″| 72| .050″|
.325″| 584408| 4921775| —
38200
INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.|
M80| 20″| 80| .050″|
.325″| —| 4921776| —
POLE SAW
CMCCSP20M1| R34| 8″| 34|
.043″| 3/8″ LP| —| 4921756| —
151.74326| S33| 8″| 33| .050″|
3/8″ LP| —| 4921772| —
43983, 172.43983, CMXGJAMD25PS| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —
79240, 79245, 79246| R34| 8″| 34|
.043″| 3/8″ LP| —| 4921756| —
R40| 10″| 40| .043″|
3/8″ LP| —| 4900187| —
CORDLESS ELECTRIC
CMCCS320D1| A42| 6″| 42| .050″| 1/4″| —| —| —
98946| S45| 12″| 45| .050″|
3/8″ LP| —| 4921754| —
34130, 34131, CMCCS610D1| R40|
10″| 40| .043″| 3/8″ LP| —| 4900187| —
98023, CMCCS620, CMCCS620M1| R45| 12″| 45| .043″|
3/8″ LP| —| 4900188| —
CMCCS660, CMCCS660E1, CMECS660, CMECS660E1|
R56| 16″| 56| .043″|
3/8″ LP| —| 4921755| —
CORDED ELECTRIC
CMECSP610| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —
CMECS614| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
CMECS600| S56| 16″| 56| .050″|
3/8″ LP| 27857| 4921764|
4921785
CUB CADET ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS
| GAUGE| PITCH| BAR/CHAIN COMBO| SAW CHAIN
PART N0.| BAR/CHAIN COMBO PART N0.
---|---|---|---|---|---|---|---|---
CS3916
‡ CHOOSE THE REPLACEMENT PARTS IN THIS LINE ONLY IF THE ORIGINAL GUIDE BAR ON YOUR SAW BEEN REPLACED WITH AN OREGON REPLACEMENT GUIDE BAR AT THIS LENGTH.
‡ ELIGE LAS PIEZAS DE REPUESTO DE ESTA LÍNEA SOLO SI LA BARRA GUÍA ORIGINAL DE TU SIERRA FUE SUSTITUIDA POR UNA BARRA GUÍA DE REPUESTO OREGON DE ESTA LONGITUD.
| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56| 16″
‡| 56| .050″| 3/8″ LP| 27857| 4921764| 4921785
S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
CS5018, CS5220
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| 577330| 4921763| 756153
CS5720| E68| 18″| 68| .050″|
3/8″| 510124| 4921780| —
E72| 20″| 72| .050″|
3/8″| 584271| 4921773| 4921787
E84| 24″| 84| .050″|
3/8″| —| 4900185| —
POLE SAW
PS26| R40| 10″| 40| .043″|
3/8″ LP| —| 4900187| —
DAYTON| SAW CHAIN CADENA| BAR LENGTH| DRIVE
LINKS| GAUGE| PITCH| BAR/CHAIN COMBO| SAW
CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
2Z753, 2Z760, 2Z970, 4Z022, 4Z023,
4Z109, 4Z573, 4Z971, 4Z972, 6Z284, 6Z823
| S40| 10″| 40| .050″| 3/8″ LP| —|
4921766
| —
S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP|
27857| 4921764| 4921785
S62| 18″| 60| .050″|
3/8″ LP| 39272| 4921765|
4921786
2Z462, 2Z462A, 2Z463, 2Z561,
2Z971, 4Z251, 4Z251A, 4Z252,
4Z397, 4Z973, 6Z826, 7Z627
| E60| 16″| 60| .050″| 3/8″|
27851| —| 2836361
E66| 18″|
66| .050″| 3/8″| 30159| 3848109|
3711368
E70| 20″| 70| .050″|
3/8″| 27850| 4921777|
4921784
E72| 21″| 72| .050″|
3/8″| —| 4921773| —
E81| 24″| 81| .050″| 3/8″| —| —| —
DEWALT| SAW CHAIN CADENA| BAR LENGTH| DRIVE
LINKS| GAUGE| PITCH| BAR/CHAIN COMBO| SAW
CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
DCCS690M1, DCCS690B, DCCS690H1, DCCS690X1, DCCS670X1|
R56| 16″| 56| .043″|
3/8″ LP| 623000|
4921755
|
3848115
DCCS620B, DCCS620P1| R45|
12″| 45| .043″| 3/8″ LP| —| 4900188| —
DOLMAR ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
ES171, ES173, PS32, PS3300TH, PS34, PS341, PS3410 TH, PS3410TH TLC, PS35,
PS350, PS401, PS420, PS45| S52| 14″| 52| .050″|
3/8″ LP| 27856| 4921760|
4921783
S56|
16″| 56| .050″| 3/8″ LP|
27857| 4921764| 4921785
109, 110, 111, 112, 113, 114, 116*,
116SI, 117, 119, 120, PS‑460, PS‑510, PS‑540, PS‑5100S, PS‑5105, PS‑5105H, PS‑6100, PS‑6100H
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
J64| 15″| 64|
.058″| .325″| —| 3654363| —
J66| 16″| 66| .058″|
.325″| —| 3711414| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
E60| 16″| 60| .050″| 3/8″| —| —| —
E68| 18″| 68| .050″|
3/8″| 510124| 4921780| —
E72| 20″| 72| .050″|
3/8″| 584271| 4921773| 4921787
E84| 24″| 84| .050″|
3/8″| —| 4900185| —
P60| 16″| 60| .058″| 3/8″| —| —| —
PS‑6800I†
† THE GAUGE (WIDTH) OF THE GUILD BAR RAILS ON THESE MODELS VARY FROM THE FACTORY. TO INSURE YOUR REPLACEMENT SAW CHAIN FEEDS CORRECTLY DOWN THE RAIL OF YOUR BAR, SELECT A CHAIN WITH A MATCHING GAUGE.
| E60| 16″| 60| .050″| 3/8″| —| —| —
E68| 18″| 68| .050″|
3/8″| 510124| 4921780| —
E72| 20″| 72| .050″|
3/8″| 584271| 4921773| 4921787
E84| 24″| 84| .050″|
3/8″| —| 4900185| —
P60| 16″| 60| .058″| 3/8″| —| —| —
PS‑6400, PS‑6400H, PS‑6400W, PS‑7300, PS‑7300H, PS‑7300W, PS‑7310, PS‑7310H,
PS‑7900, PS‑7900H,
PS‑7900W, PS‑7910, PS‑7910H, PS‑7910W, PS‑7910XD, PS‑9000, PS‑9010
| E72| 20″| 72| .050″|
3/8″| —| 4921773| —
E84| 24″| 84| .050″|
3/8″| —| 4900185| —
EARTHQUAKE ™
|
SAW CHAIN CADENA
DE LA SIERRA
|
BAR LENGTH
LONGITUD DE LA BARRA
|
DRIVE LINKS
ESLABÓN MOTRIZ
|
GAUGE CALIBRE
|
PITCH PASO
|
BAR/CHAIN COMBO
PAQUETE DE COMBINACIÓN DE CADENA/BARRA
|
SAW CHAIN PART N0.
CADENA DE LA SIERRA
NÚMERO DE PIEZA
|
BAR/CHAIN COMBO PART N0.
PAQUETE DE COMBINACIÓN DE CADENA/BARRA NÚMERO DE PIEZA
---|---|---|---|---|---|---|---|---
CS3816, CS4116, CS3814
| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP| 27857| 4921764| 4921785
S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
CS4518, CS4518B| S62| 18″| 62| .050″|
3/8″ LP| —| 4921765| —
EARTHWISE ™
|
SAW CHAIN CADENA
DE LA SIERRA
|
BAR LENGTH
LONGITUD DE LA BARRA
|
DRIVE LINKS
ESLABÓN MOTRIZ
|
GAUGE CALIBRE
|
PITCH PASO
|
BAR/CHAIN COMBO
PAQUETE DE COMBINACIÓN DE CADENA/BARRA
|
SAW CHAIN PART N0.
CADENA DE LA SIERRA
NÚMERO DE PIEZA
|
BAR/CHAIN COMBO PART N0.
PAQUETE DE COMBINACIÓN DE CADENA/BARRA NÚMERO DE PIEZA
CCS 30008, CPS40108, CVPS41008, LPS40208, NVPS42108, PS40008| S33| 8″| 33| .050″| 3/8″ LP| —|
4921772
| —
CPS40110, LCS32010, LPS4210, PS40010| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —
LCS32413| S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
CS30014, LCS34014, LCS35814, YT4729
| S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
M1L‑KW‑305| S53| 14″|
53| .050″| 3/8″ LP| —| 2546085| —
CS30016, CS30116| S57| 14″| 57| .050″|
3/8″ LP| —| 4921767| —
ECHO ™
|
SAW CHAIN CADENA
DE LA SIERRA
|
BAR LENGTH
LONGITUD DE LA BARRA
|
DRIVE LINKS
ESLABÓN MOTRIZ
|
GAUGE CALIBRE
|
PITCH PASO
|
BAR/CHAIN COMBO
PAQUETE DE COMBINACIÓN DE CADENA/BARRA
|
SAW CHAIN PART N0.
CADENA DE LA SIERRA
NÚMERO DE PIEZA
|
BAR/CHAIN COMBO PART N0.
PAQUETE DE COMBINACIÓN DE CADENA/BARRA NÚMERO DE PIEZA
CS‑280, CS‑280EP, CS‑290, CS‑30
(6/78 – 9/80), CS‑300, CS‑3000, CS‑301, CS‑302 (AFTER SERIAL # 0015304), CS‑303T, CS‑310, CS‑315, CS‑330, CS‑330MX4, CS‑330T, CS‑340, CS‑3400, CS‑341, CS‑345, CS‑3450, CS‑346, CS‑351 (AFTER SERIAL # 0112195), CS‑352, CS‑355T, CS‑360, CS‑360T, CS‑361P, CS‑370, CS‑370F, CS‑370T, CS‑400 (AFTER SERIAL # 09001001), CS‑400F, ECS‑2000, ECS‑3000
‡ CHOOSE THE REPLACEMENT PARTS IN THIS LINE ONLY IF THE ORIGINAL GUIDE BAR ON YOUR SAW BEEN REPLACED WITH AN OREGON REPLACEMENT GUIDE BAR AT THIS LENGTH.
‡ ELIGE LAS PIEZAS DE REPUESTO DE ESTA LÍNEA SOLO SI LA BARRA GUÍA ORIGINAL DE TU SIERRA FUE SUSTITUIDA POR UNA BARRA GUÍA DE REPUESTO OREGON DE ESTA LONGITUD.
| S40| 10″| 40| .050″| 3/8″ LP| —|
4921766
| —
S45| 12″| 45| .050″|
3/8″ LP| 27792|
4921754
| —
S52|
14″| 52| .050″| 3/8″ LP| 27856|
4921760
|
4921783
S56| 16″ ‡| 56| .050″| 3/8″ LP| 27857|
4921764
|
4921785
S57| 16″| 57| .050″| 3/8″ LP| —|
4921767
| —
S62| 18″| 62| .050″|
3/8″ LP| 39272|
4921765
|
4921786
CS‑305†, CS‑306†
† THE GAUGE (WIDTH) OF THE GUILD BAR RAILS ON THESE MODELS VARY FROM THE FACTORY. TO INSURE YOUR REPLACEMENT SAW CHAIN FEEDS CORRECTLY DOWN THE RAIL OF YOUR BAR, SELECT A CHAIN WITH A MATCHING GAUGE.
† EL CALIBRE (ANCHO) DE LOS RIELES DE LA BARRA GUÍA EN ESTOS MODELOS VARÍA SEGÚN LA FÁBRICA. PARA ASEGURARSE DE QUE LA CADENA DE LA SIERRA DE REPUESTO SE DESPLAZA CORRECTAMENTE POR EL RIEL DE LA BARRA, SELECCIONA UNA CADENA CON EL MISMO CALIBRE.
| S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
R45| 12″| 45| .043″|
3/8″ LP| —| 4900188| —
R52| 14″| 52| .043″|
3/8″ LP| —| 4900189| —
CCS‑58V, CCS‑58V4AH| R56|
16″| 56| .043″| 3/8″ LP| 623000| 4921755|
3848115
CS‑271T*
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
* ANTES DE SELECCIONAR LAS PIEZAS DE REPUESTO PARA ESTOS MODELOS, CONSULTA EL MANUAL DEL PROPIETARIO Y ELIGE LAS PIEZAS QUE COINCIDAN CON LAS ESPECIFICACIONES DE PASO Y CALIBRE DE FÁBRICA DE TU SIERRA. SE OFRECEN BARRAS Y CADENAS DE DIFERENTE PASO Y CALIBRE PARA LA SIERRA, PERO NO SON COMPATIBLES ENTRE SÍ.
| S40| 10″| 40| .050″| 3/8″ LP| —|
4921766
| —
S45| 12″| 45| .050″|
3/8″ LP| 27792|
4921754
| —
R40| 10″| 40| .043″|
3/8″ LP| —|
4900187
| —
CS‑3510‑16AA
‡ CHOOSE THE REPLACEMENT PARTS IN THIS LINE ONLY IF THE ORIGINAL GUIDE BAR ON YOUR SAW BEEN REPLACED WITH AN OREGON REPLACEMENT GUIDE BAR AT THIS LENGTH.
‡ ELIGE LAS PIEZAS DE REPUESTO DE ESTA LÍNEA SOLO SI LA BARRA GUÍA ORIGINAL DE TU SIERRA FUE SUSTITUIDA POR UNA BARRA GUÍA DE REPUESTO OREGON DE ESTA LONGITUD.
| S56| 16″ ‡| 57| .050″| 3/8″ LP| 27857|
4921764
|
4921785
S57| 16″| 57| .050″| 3/8″ LP| —|
4921767
| —
CS‑3600, CS‑3900, CS‑4000, CS‑400EVL, CS‑4100, CS‑440, CS‑4400, CS‑440EVL,
CS‑4500, CS‑4600, CS‑5000, CS‑510, CS‑520**
** MAY TAKE “M” OR “H/Q” TYPE CHAIN. CHECK CURRENT CHAIN ON YOUR SAW.
** PUEDES TENER UNA CADENA DE TIPO “M” O “H/Q”. REVISA CUÁL ES LA CADENA ACTUAL DE TU SIERRA.
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| 36892|
4921768
| —
H78| 20″| 78| .050″|
.325″| 37977|
4921763
|
96403
CS‑4510
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| —| 4921763| —
CS‑4910‑20AA| H78| 20″| 78| .050″|
.325″| —| 4921763| —
CS‑450, CS‑450P, CS‑500P, CS‑501P, CS‑530, CS‑550P
INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.
** MAY TAKE “M” OR “H/Q” TYPE CHAIN. CHECK CURRENT CHAIN ON YOUR SAW.
** PUEDES TENER UNA CADENA DE TIPO “M” O “H/Q”. REVISA CUÁL ES LA CADENA ACTUAL DE TU SIERRA.
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| —| 4921763| —
M66| 16″| 66| .050″|
.325″| —| 4921774| —
M72| 18″| 72| .050″|
.325″| —| 4921775| —
M78| 20″| 78|
.050″| .325″| —| 3654373| —
CS‑490
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| —| 4921763| —
J66| 16″| 66| .058″|
.325″| —| 3711414| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
CS‑620P, CS‑620PW, CS‑451, CS‑452, CS‑500EVL, CS‑510EVL, CS‑590, CS‑60, CS‑600P, CS‑601, CS‑602, CS‑60S, CS‑650, CS‑660, CS‑670, CS‑6700, CS‑680, CS‑701, CS‑702, CS‑706, CS‑750, CS‑8000, CS‑T610
| E60| 16″| 60| .050″| 3/8″|
27851| —| 2836361
E66| 18″|
66| .050″| 3/8″| 30159|
3848109| 3711368
E70| 20″| 70| .050″|
3/8″| 27850| 4921777| 4921784
E81| 24″| 81| .050″| 3/8″| —| —| —
DCS‑2500T‑12C1| R45| 12″| 45| .043″|
3/8″ LP| —| 4900188| —
DCS‑5000‑18C2| S62| 18″| 62| .050″|
3/8″| 39272| 4921765|
4921786
POLE SAW | PODADORA DE ALTURA
PPF‑210, PPF‑211, PPF‑280, PPT‑230, PPT‑231, PPT‑260, PPT‑261, PPT‑265,
PPT‑265S, PPT‑265H, PPT‑266H, PPT‑266S, PPT‑280, PT‑2100|
S39| 10″| 39| .050″|
3/8″ LP| —|
109534
| —
S44| 12″| 44| .050″|
3/8″ LP| —|
4900190
| —
PPF‑225*
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
‡ CHOOSE THE REPLACEMENT PARTS IN THIS LINE ONLY IF THE ORIGINAL GUIDE BAR ON YOUR SAW BEEN REPLACED WITH AN OREGON REPLACEMENT GUIDE BAR AT THIS LENGTH.
|
|
10″ ‡
|
39
|
.050″
|
3/8″ LP
|
—
|
109534
|
—
|
10″ ‡
|
39
|
.050″
|
3/8″ LP
|
—
|
4921766
|
—
R39
|
10″ ‡
|
39
|
.043″
|
3/8″ LP
|
—
|
—
|
—
PPT‑2620*
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
‡ CHOOSE THE REPLACEMENT PARTS IN THIS LINE ONLY IF THE ORIGINAL GUIDE BAR ON YOUR SAW BEEN REPLACED WITH AN OREGON REPLACEMENT GUIDE BAR AT THIS LENGTH.
| S44| 12″ ‡| 44| .055″| 3/8″ LP| —|
4900190
| —
S45| 12″ ‡| 44|
.055″| 3/8″ LP| —|
4921754
| —
R44| 12″ ‡|
44| .055″| 3/8″ LP| —|
3654366
| —
R45| 12″ ‡| 44|
.055″| 3/8″ LP| —|
4900188
| —
EFCO ™ – EMAK ™| SAW CHAIN CADENA| BAR
LENGTH| DRIVE LINKS| GAUGE CALIBRE| PITCH|
BAR/CHAIN COMBO| SAW CHAIN PART N0.
| BAR/CHAIN COMBO PART N0.
---|---|---|---|---|---|---|---|---
MT3500
| S53| 14″| 53| .050″|
3/8″ LP| —| 2546085| —
S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
132S, MT3600, MT3700, MT3750, MT4000, MT4100SP
| S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
147†, 152†, MT5200†
† THE GAUGE (WIDTH) OF THE GUILD BAR RAILS ON THESE MODELS VARY FROM THE FACTORY. TO INSURE YOUR REPLACEMENT SAW CHAIN FEEDS CORRECTLY DOWN THE RAIL OF YOUR BAR, SELECT A CHAIN WITH A MATCHING GAUGE.
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
J66| 16″| 66| .058″|
.325″| —| 3711414| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
156, 165
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| E60| 16″| 60| .050″| 3/8″| —| —| —
E68| 18″| 68| .050″|
3/8″| 510124| 4921780| —
E72| 20″| 72| .050″|
3/8″| 584271| 4921773| 4921787
E84| 24″| 84| .050″|
3/8″| —| 4900185| —
P60| 16″| 60| .058″| 3/8″| —| —| —
J66| 16″| 66| .058″|
.325″| —| 3711414| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
J78| 20″| 78| .058″|
.325″| —| 3711374| —
181†, MT6500†, MT7200†, MT8200†
† THE GAUGE (WIDTH) OF THE GUILD BAR RAILS ON THESE MODELS VARY FROM THE FACTORY. TO INSURE YOUR REPLACEMENT SAW CHAIN FEEDS CORRECTLY DOWN THE RAIL OF YOUR BAR, SELECT A CHAIN WITH A MATCHING GAUGE.
| E72| 20″| 72| .050″| 3/8″| —|
4921773
| —
E84| 24″| 84| .050″|
3/8″| —|
4900185
| —
MT4400
INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.
| M66| 16″| 66| .050″|
.325″| —| 4921774| —
M72| 18″| 72| .050″|
.325″| —| 4921775| —
EGO| SAW CHAIN CADENA| BAR LENGTH| DRIVE
LINKS| GAUGE| PITCH| BAR/CHAIN COMBO| SAW
CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
MPS1000 SERIES, PSA1000, PPSX2504, PS1000 SERIES|
R40| 10″| 40| .043″|
3/8″ LP| —|
4900187
| —
CSX3000 SERIES| R45|
12″| 45| .043″| 3/8″ LP| —| 4900188| —
CS1400 SERIES| R52|
14″| 52| .043″| 3/8″ LP| —| 4900189| —
CS1600 SERIES| R56|
16″| 56| .043″| 3/8″ LP| —| 4921755| —
CS1800 SERIES| S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
GREENWORKS ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
POLE SAW
GLPS80210| A58| 10″| 58| .050″| 1/4″| —| —| —
1400102 24V LI‑ION,
20192 6.5A, 20302 40V G‑MAX,
20352 24V LI‑ION, 20612 20V LI‑ION,
20672 40V G‑MAX, PSPH40B00
|
|
8″
|
33
|
.050″
|
3/8″ LP
|
—
|
4921772
|
—
20062 7A 2‑IN‑1, 20362 24V LI‑ION, 2000102 24V LI‑ION, 20V LI‑ION, PSCS06B00|
|
10″
|
40
|
.050″
|
3/8″ LP
|
—
|
4921766
|
—
20202 40V G‑MAX, 20262 40V G‑MAX, 20292 40V G‑MAX, 20082 40V, 20297 40V G‑MAX|
|
12″
|
45
|
.050″
|
3/8″ LP
|
27792
|
4921754
|
—
20012 9A ELECTRIC
20222 9A ELECTRIC
| S52| 14″| 52| .050″| 3/8″ LP| 27856|
4921760
|
4921783
20022 12A, 20232 12A, CS60L00,
CS60L210, 2002802, CS60L212
| S56| 16″| 56| .050″| 3/8″ LP| 27857|
4921764
|
4921785
GCS80420, GCS80421, 200002 80V| S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
20032 13A, 20332 14.5| S63| 18″| 63|
.050″| 3/8″ LP| —| 3654368| —
20152 DIGIPRO 40V,
20312 DIGIPRO G‑MAX 40V,
20322 DIGIPRO G‑MAX 40V
|
|
16″
|
56
|
.043″
|
3/8″ LP
|
|
4921755
|
3848115
HITACHI| SAW CHAIN CADENA| BAR LENGTH| DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO| SAW CHAIN PART N0.
| BAR/CHAIN COMBO PART N0.
CS36DLP4| S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
CS33ET14, CS33EB16| S52| 14″| 52| .050″|
3/8″ LP| 27856| 4921760|
4921783
S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
CS40EA18 INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.|
M72| 18″| 72| 050″|
.325″|
—
| 4921775|
—
CS51EAP INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.|
H78| 20″| 78| .050″|
.325″| 37977| 4921763| 96403
M66| 16″| 66| .050″|
.325″| —| 4921774| —
M72| 18″| 72| .050″|
.325″| —| 4921775|
HOMELITE ™
|
SAW CHAIN CADENA
DE LA SIERRA
|
BAR LENGTH
LONGITUD DE LA BARRA
|
DRIVE LINKS
ESLABÓN MOTRIZ
|
GAUGE CALIBRE
|
PITCH PASO
|
BAR/CHAIN COMBO
PAQUETE DE COMBINACIÓN DE CADENA/BARRA
|
SAW CHAIN PART N0.
CADENA DE LA SIERRA
NÚMERO DE PIEZA
|
BAR/CHAIN COMBO PART N0.
PAQUETE DE COMBINACIÓN DE CADENA/BARRA NÚMERO DE PIEZA
---|---|---|---|---|---|---|---|---
20, 20AV, 23, 23AV, 3300, 3314,
3316, 3318, 3350, 3550, 3800, 3850, PS33, RANGER, UT0901A, UT10510, UT10514, UT10516, UT10517, UT10530, UT10530A, UT10540, UT10542, UT10544, UT10546, UT10548, UT10549, UT10560, UT10562, UT10564, UT10566, UT10568, UT10569, UT10580, UT10582, UT10584, UT10586, UT10588, UT10589, UT10640, UT10660, UT10680, UT10901, UT10926, UT10947A, UT10947D, UT43100, UT43102, UT43103, UT43104, UT43120, UT43122, ZR10540, ZR10560, ZR10580
|
|
14″
|
52
|
.050″
|
3/8″ LP
|
|
4921760
|
4921783
|
16″
|
56
|
.050″
|
3/8″ LP
|
|
4921764
|
4921785
|
18″
|
62
|
.050″
|
3/8″ LP
|
|
4921765
|
4921786
EL12, EL14, EL16
| S45| 12″| 45| .050″|
3/8″ LP| —| 4921754| —
S50| 14″| 50| .050″|
3/8″ LP| —| 4921758| —
S56|
16″| 56| .050″| 3/8″ LP| —| 4921764| —
180, 190, 192, 200, 200 ELECTRIC, 245 (BEFORE XE339), BANDIT, CLASSIC 192,
LITTLE RED, LX30, SUPER 2, SUPER 2CC, VI SUPER 2, XEL‑14, XEL, XL, XL 2 (AFTER
SERIAL # 5042001), XL‑10, XL‑14, XL‑16, XL2CC|
S48| 12″| 48| .050″|
3/8″ LP| —| 2546084| —
S53| 14″| 53| .050″|
3/8″ LP| 27859| 2546085|
2836359
S59| 16″| 59| .050″|
3/8″ LP| 30141| 2546086|
3711367
S64| 18″| 64| .050″|
3/8″ LP| —| 3711361| —
245 (AFTER XE339), 252, 300
| H67| 16″| 67| .050″|
.325″| —| 3711410| —
H73| 18″| 73| .050″|
.325″| —| 3711370| —
130, 150, 150AO, 250, 300, 340, BIG RED, EZ 250, EZ SERIES, MINI SL, SUPER
EZAO, V‑15 MINI, S6, XL 76, XL 100 SERIES| E59| 16″| 59| .050″|
3/8″| 29571| —|
3711366
E70| 20″| 70| .050″|
3/8″| —| 4921777| —
25, 27, 4100, 4150, 4500, 4550, SUPER
240, TIMBERMAN, UT10518, UT10519, UT10520, UT10522, UT10550, UT10552, UT10526, UT10927A, UT10942A, UT10946A, ZR10518, ZR10520, ZR10522
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| 36892| 4921768| —
H78| 20″| 78| .050″|
.325″| 37977|
4921763
|
96403
POLE SAW | PODADORA DE ALTURA
UT15520A EXACTFIT| R40|
10″| 40| .043″| 3/8″ LP| —| 4900187| —
HUSQVARNA ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
34, 35, 37, 335, 325P4, 325P5X,
326P4, 326P5X, 334T, 316E, 1400,
1600, EL 316, T435, T540
| S45| 12″| 45| .050″|
3/8″ LP| —| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| —| 4921760| —
S56|
16″| 56| .050″| 3/8″ LP| —| 4921764| —
65, 66, 70, 77, 181, 185, 260, 266, 268,
272, 281, 285, 288, 288XP, 298*, 365, 371,
372, 372XP, 372XPG, 372XPW, 380, 385XP,
390XP, 390XPG, 390XPW, 394, 395*,
395XPW*, 465 RANCHER, 480, 562XP,
565, 570, 572XP, 572XPG, 575XP, 575XPG,
575XPW, 576XP AUTO TUNE, 576XPW,
1100, 2100, 2101, 3120, 970515740*
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| E60| 16″| 60| .050″| 3/8″| —| —| —
E68| 18″| 68| .050″|
3/8″| —|
4921780
| —
E72| 20″| 72| .050″|
3/8″| —|
4921773
| —
D72| 20″| 72| .050″|
3/8″| 584410|
3711393
| —
E84| 24″| 84| .050″|
3/8″| —|
4900185
| —
P60| 16″| 60| .058″| 3/8″| —| —| —
336, 338XPT, 339XPT*
INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| S45| 12″| 45| .050″|
3/8″ LP| —| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP| —| 4921764| —
J66| 16″| 66| .058″|
.325″| —| 3711414| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
M66| 16″| 66| .050″|
.325″| 584410| 4921774| —
M72| 18″| 72| .050″|
.325″| 584408| 4921775| —
55 RANCHER, 254, 254XP, 257,
261, 262, 262XP, 357XP, 359*,
362, 362XP, 455 RANCHER, 460 RANCHER, 555, 560XP, 560XPG*
INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| E60| 16″| 60| .050″| 3/8″| —| —| —
E68| 18″| 68| .050″|
3/8″| 510124| 4921780| —
E72| 20″| 72| .050″|
3/8″| 584271| 4921773| 4921787
E84| 24″| 84| .050″|
3/8″| —| 4900185| —
P60| 16″| 60| .058″| 3/8″| —| —| —
J66| 16″| 66| .058″|
.325″| —| 3711414| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
J78| 20″| 78| .058″|
.325″| —| 3711374| —
H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| —| 4921763| —
M66| 16″| 66| .050″|
.325″| 584410| 4921774| —
M72| 18″| 72| .050″|
.325″| 584408| 4921775| —
M78| 20″| 78|
.050″| .325″| —| 3654373| —
M80| 20″| 80| .050″|
.325″| —| 4921776| —
120I, 120 MARK II| S52| 14″| 52| .050″|
3/8″ LP| —| 4921760| —
436LI, 536LI XP, T536LI XP
| R40| 10″| 40| .043″|
3/8″ LP| —| 4900187| —
R45| 12″| 45| .043″|
3/8″ LP| —| 4900188| —
R52| 14″| 52| .043″|
3/8″ LP| —| 4900189| —
536LIP4, 536LIPT5| S40|
10″| 40| .050″| 3/8″ LP| —| 4921766| —
136, 137, 141, 142, 235,
235E, 240, 240E*
INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| R56| 16″| 56| .043″|
3/8″ LP| 623000| 4921755|
3848115
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP| 27857| 4921764| 4921785
S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
J66| 16″| 66| .058″|
.325″| —| 3711414| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
J78| 20″| 78| .058″|
.325″| —| 3711374| —
H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| —| 4921763| —
M66| 16″| 66| .050″|
.325″| —| 4921774| —
M72| 18″| 72| .050″|
.325″| —| 4921775| —
M78| 20″| 78|
.050″| .325″| —| 3654373| —
M80| 20″| 80| .050″|
.325″| —| 4921776| —
234†, 238†, 242†, 246†, 340†, 340E†,
345†, 345E†, 346†, 346XP†, 350†,
350E†, 351†, 353†, 435†, 435E†, 440†,
440E†, 445†, 445E†, 450†, 543XP†,
543XPG†, 545†, 545 MARK II†, 550XP†,
550XP MARK II†, 550XPG†, 550XPG MARK II†, 970515326, 970515428, 970515024, 970515640, 967690602*
INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
† THE GAUGE (WIDTH) OF THE GUILD BAR RAILS ON THESE MODELS VARY FROM THE FACTORY. TO INSURE YOUR REPLACEMENT SAW CHAIN FEEDS CORRECTLY DOWN THE RAIL OF YOUR BAR, SELECT A CHAIN WITH A MATCHING GAUGE.
| J66| 16″| 66| .058″| .325″| —|
3711414
| —
J72| 18″| 72| .058″|
.325″| —|
3711413
| —
J78| 20″| 78| .058″|
.325″| —|
3711374
| —
M66| 16″| 66| .050″|
.325″| 584410|
4921774
| —
M72| 18″| 72| .050″|
.325″| 584408|
4921775
| —
M78| 20″| 78|
.050″| .325″| —|
3654373
| —
|
20″
|
80
|
.050″
|
.325″
|
—
|
4921776
|
—
JOHN DEERE| SAW CHAIN CADENA| BAR LENGTH
| DRIVE LINKS
| GAUGE| PITCH| BAR/CHAIN COMBO| SAW CHAIN
PART N0.| BAR/CHAIN COMBO PART N0.
---|---|---|---|---|---|---|---|---
25EV, 28, 28V, 30, 30V, 35EV, 40V, CS36, CS36LE, CS40, CS40LE, CS40V, J3816
‡ CHOOSE THE REPLACEMENT PARTS IN THIS LINE ONLY IF THE ORIGINAL GUIDE BAR ON YOUR SAW BEEN REPLACED WITH AN OREGON REPLACEMENT GUIDE BAR AT THIS LENGTH.
‡ ELIGE LAS PIEZAS DE REPUESTO DE ESTA LÍNEA SOLO SI LA BARRA GUÍA ORIGINAL DE TU SIERRA FUE SUSTITUIDA POR UNA BARRA GUÍA DE REPUESTO OREGON DE ESTA LONGITUD.
| S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56| 16″
‡| 56| .050″| 3/8″ LP| 27857| 4921764| 4921785
S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
50AV, 50V, 51SV, 55SV, 55V,
60V, 65, 66SV, 70V, 80EV
| E60| 16″| 60| .050″| 3/8″|
27851| —| 2836361
E66| 18″|
66| .050″| 3/8″| 30159| 3848109|
3711368
E70| 20″| 70| .050″|
3/8″| 27850| 4921777|
4921784
E81| 24″| 81| .050″| 3/8″| —| —| —
45EV, 46EV, 300CS, 450V
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| 36892| 4921768| —
H78| 20″| 78| .050″|
.325″| 37977| 4921763| 96403
POLE SAW | PODADORA DE ALTURA
PS2383, PS2683, PSA10| R40|
10″| 40| .043″| 3/8″ LP| —| 4900187| —
JONSERED ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
CS16I| R56| 16″| 56| .043″|
3/8″ LP| —| 4921755| —
CS2139T, CS2236T| S45|
12″| 45| .050″| 3/8″ LP| —| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| —| 4921760| —
S56|
16″| 56| .050″| 3/8″ LP| —| 4921764| —
CS2137, CS2138| S45|
12″| 45| .050″| 3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP|
27857| 4921764| 4921785
S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
60, 61, 62, 66, 70, 75, 77, 80, 81,
90, 110, 111, 601, 621, 751, 801,
820, 830, 910, 920, 939, 1020
| E60| 16″| 60| .050″| 3/8″|
27853| —| 3711364
E70| 20″| 70| .050″|
3/8″| 27852| 4921777|
2836360
P60| 16″| 60| .058″| 3/8″| —| —| —
520SP, 535, 2163, CS2163, CS2255, CS2258, CS2260*
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| E60| 16″| 60| .050″| 3/8″| 510124| —| —
E68| 18″| 68| .050″|
3/8″| 584271| 4921780| 4921787
E72| 20″| 72| .050″|
3/8″| —| 4921773| —
J64| 15″| 64|
.058″| .325″| —| 3654363| —
J66| 16″| 66| .058″|
.325″| —| 3711414| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
J78| 20″| 78| .058″|
.325″| —| 3711374| —
45, 49, 50, 51, 52, 410, 420, 425,
435, 450, 451, 455, 510, 521, 535
| J64| 15″| 64|
.058″| .325″| —| 3654363| —
J66| 16″| 66| .058″|
.325″| —| 3711414| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
J78| 20″| 78| .058″|
.325″| —| 3711374| —
CS2238, CS2234S
INDICATES NARROW KERF.
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP|
27857| 4921764| 4921785
S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
M66| 16″| 66| .050″|
.325″| —| 4921774| —
M72| 18″| 72| .050″|
.325″| —| 4921775| —
2054, 2055, CS2156, CS2159
INDICATES NARROW KERF.
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| E60| 16″| 60| .050″| 3/8″| —| —| —
E68| 18″| 68| .050″|
3/8″| —| 4921780| —
E72| 20″| 72| .050″|
3/8″| 510124
|
4921773
| —
4921787
J64| 15″| 64|
.058″| .325″| —| 3654363| —
J66| 16″| 66| .058″|
.325″| —| 3711414| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
M66| 16″| 66| .050″|
.325″| 584410| 4921774| —
M72| 18″| 72| .050″|
.325″| 584408| 4921775| —
2050†, 2149 TURBO†, CS2145†, CS2149†, CS2150†, CS2152†, CS2153†, CS2240†,
CS2245†, CS2250†, CS2250S†, CS2252†, CS2253†
INDICATES NARROW KERF.
† THE GAUGE (WIDTH) OF THE GUILD BAR RAILS ON THESE MODELS VARY FROM THE FACTORY. TO INSURE YOUR REPLACEMENT SAW CHAIN FEEDS CORRECTLY DOWN THE RAIL OF YOUR BAR, SELECT A CHAIN WITH A MATCHING GAUGE.
| J64| 15″| 64|
.058″| .325″| —| 3654363| —
J66| 16″| 66| .058″|
.325″| —| 3711414| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
J78| 20″| 78| .058″|
.325″| —| 3711374| —
M66| 16″| 66| .050″|
.325″| 584410| 4921774| —
M72| 18″| 72| .050″|
.325″| 584408| 4921775| —
M78| 20″ ‡|
78| .050″| .325″| —| 3654373| —
M80| 20″ ‡| 80|
.050″| .325″| —| 4921776| —
K O B A L T ™| SAW CHAIN CADENA|
BAR LENGTH| DRIVE LINKS| GAUGE CALIBRE| PITCH
PASO| BAR/CHAIN COMBO|
SAW CHAIN PART N0.
|
BAR/CHAIN COMBO PART N0.
---|---|---|---|---|---|---|---|---
KCS 1224A‑03| R45| 12″| 45| .043″|
3/8″ LP| 27792| 4900188| —
KCS 120‑06 40 VOLT, 506890 40 VOLT, KCS 120‑07 40 VOLT|
S45| 12″| 45| .050″|
3/8″ LP| 27792|
4921754
| —
KCS 4040‑06, KCS 1040A‑03| R52|
14″| 52| .043″| 3/8″ LP| —| 4900189| —
A011038| 571037L| 18″| 62|
.050″| 3/8″ LP| —| 901186| —
POLE SAW | PODADORA DE ALTURA
KPS 80‑06 40V, KPS 80‑07 40V, KPS 80‑08 40V, 506891 40V|
S33| 8″| 33| .050″|
3/8″ LP| —|
4921772
| —
KPS 1040A‑03| R40| 10″| 40| .043″|
3/8″ LP| —| 4900187| —
KPS 1024A‑03| R34| 8″| 34|
.043″| 3/8″ LP| —| 4921756| —
MA K I T A ™| SAW CHAIN CADENA
| BAR LENGTH| DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO| SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
XCU05, XCU06
| R33| 8″| 33|
.043″| 3/8″ LP| —| 3654371| —
R40| 10″| 40| .043″|
3/8″ LP| —| 4900187| —
DCS34, DCS340, DCS341, DCS400, DCS401, DCS330S, DCS3416, DCS390S,
EA4300F40B, UC3050, UC3051A, UC3530A, UC3550A, UC3551A, UC4000, UC4030A, UC4050A, UC4051A, UC4550A, UC4551A
| S52| 14″| 52| .050″| 3/8″ LP| 27856|
4921760
|
4921783
S56| 16″| 56| .050″| 3/8″ LP| 27857|
4921764
|
4921785
5012B, 5014NB, 5016NB
‡ CHOOSE THE REPLACEMENT PARTS IN THIS LINE ONLY IF THE ORIGINAL GUIDE BAR ON YOUR SAW BEEN REPLACED WITH AN OREGON REPLACEMENT GUIDE BAR AT THIS LENGTH.
| S45| 12″ ‡| 45|
.050″| 3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP| 27857| 4921764| 4921785
XCU03†, XCU04†, EA3200S†, EA3201S†, EA3500S†, EA3501S†
† THE GAUGE (WIDTH) OF THE GUILD BAR RAILS ON THESE MODELS VARY FROM THE FACTORY. TO INSURE YOUR REPLACEMENT SAW CHAIN FEEDS CORRECTLY DOWN THE RAIL OF YOUR BAR, SELECT A CHAIN WITH A MATCHING GAUGE.
‡ CHOOSE THE REPLACEMENT PARTS IN THIS LINE ONLY IF THE ORIGINAL GUIDE BAR ON YOUR SAW BEEN REPLACED WITH AN OREGON REPLACEMENT GUIDE BAR AT THIS LENGTH.
| R45| 12″| 45| .043″|
3/8″ LP| —| 4900188| —
R52| 14″| 52| .043″|
3/8″ LP| —| 4900189| —
R56| 16″| 56| .043″|
3/8″ LP| 623000| 4921755|
3848115
S45| 12″ ‡| 45|
.050″| 3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP| 27857| 4921764| 4921785
XCU04CM*
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
|
|
16″
|
56
|
.050″
|
3/8″ LP
|
|
4921764
|
4921785
|
16″
|
56
|
.043″
|
3/8″ LP
|
|
4921755
|
3848115
DCS6000I, DCS6800I| E72| 20″| 72| .050″| 3/8″| 510124
|
4921773
| —
4921787
DCS460, DCS510, DCS5121, DCS520I, DCS5200I, DCS540, EA5000P53G, EA5600F, EA6100P53E, EA6100P53G, EA6101P53G
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| E72| 20″| 42| .050″| 3/8″| 510124
|
4921773
| —
4921787
H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —|
4921768
| —
H78| 20″| 78| .050″|
.325″| 577330|
4921763
|
756153
DCS430, DCS431| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| 577330| 4921763| 756153
DCS6400†, DCS6401†, DCS6420†, DCS6421†, DCS7300†, DCS7301†, DCS7900†, DCS7901†
† THE GAUGE (WIDTH) OF THE GUILD BAR RAILS ON THESE MODELS VARY FROM THE FACTORY. TO INSURE YOUR REPLACEMENT SAW CHAIN FEEDS CORRECTLY DOWN THE RAIL OF YOUR BAR, SELECT A CHAIN WITH A MATCHING GAUGE.
| E60| 16″| 60| .050″| 3/8″| —| —| —
E68| 18″| 68| .050″|
3/8″| —| 4921780| —
E72| 20″| 72| .050″|
3/8″| —| 4921773| —
E84| 24″| 84| .050″|
3/8″| —| 4900185| —
MCCULLOCH ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE CALIBRE| PITCH PASO|
BAR/CHAIN COMBO| SAW CHAIN PART N0.| BAR/CHAIN
COMBO PART N0.
EAGER BEAVER: 2.0/2.1 SERIES; ELECTRIC: MCC1514; ELECTRAMAC: 2010, 2014,
2016, 2116, 2310, 12AS, 14A/S, 35A/S,
10E, 12E, 14E, 12AE, 14AE, EM14E, EM16E; MAC: 110, 115, 120, 130, 140, 380, 400,
430, 435, 440, 445, 160S, 3200, 3205,
3210, 3214, 3216, 3505, 3514, 3516, 3518,
3816, 3818AV; MACCAT SUPER: 165, 175,
310, 320, 330, 340, 355, 365, 375, 510,
515, 6AV, 18AV, MS1415, MS1420, MS1430, MS1432, MS1435, MS1453, MS1455, MS1635, MS1838, PM155; MINI MAC; PM425; SILVER EAGLE: 2010, 2316, 2012S, 2014S, 2016S, 2116AVS, 2318AVS; SUPER: 2316, 2318AV; TITAN: 35, 38, 40; WILDCAT/MACCAT
|
|
12″
|
44
|
.050″
|
3/8″ LP
|
—
|
4900190
|
—
|
14″
|
49
|
.050″
|
3/8″ LP
|
|
91362
|
3711371
|
16″
|
54
|
.050″
|
3/8″ LP
|
100457
|
91361
|
—
S60
|
18″
|
60
|
.050″
|
3/8″ LP
|
|
—
|
2836363
EAGER BEAVER: 12ES, 14ES, 16ES, 250‑14, 300S‑16; ELECTRAMAC: 10ES, 12ES, 14ES,
16ES, 200‑12, 250‑12, 250‑14, 300S‑16,
450S‑16; ELECTRIC: MCC3516F, MCC4516F, MCC4516FK; SILVER EAGLE: 250‑14, 300S‑16, MS1425, MS1630, MS1640
| S39| 10″| 39| .050″|
3/8″ LP| —| 109534| —
S45| 12″| 45| .050″|
3/8″ LP| —| 4921754| —
S50| 14″| 50| .050″|
3/8″ LP| —| 4921758| —
S55|
16″| 55| .050″| 3/8″ LP| —| 4921759| —
MACCAT SUPER: MS1850, MS2046, MS2049, MS2050; MAC: 1846, 4600,
4700, 4900 SERIES, 5000, 5500, 1849AV,
2046AV, 2049AV; PROMAC: 1845AV,
40, 46; SILVER EAGLE: 2818, 3020
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| 577330| 4921763| 756153
MC4218AV, MC3516, MCC1435A, MCC1840B, MP406, MS354A, MS4016P, MS4018P,
MXC1840D, MXC1840DK, EAGER BEAVER: 356, 358, EBC1840DK; MACCAT: 438|
S52| 14″| 52|
.050″| 3/8″ LP| 27856| 4921760|
4921783
S56|
16″| 56| .050″| 3/8″ LP| 27857| 4921764| 4921785
S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
MACCAT SUPER: 1434NAVVP, 1436NAV, 1636NAVCC, MS1639NAVCC, MS1839, EB428, MS1842AVCC
| S49| 14″| 49| .050″|
3/8″ LP| 509534| 91362|
3711387
S54| 16″| 54| .050″| 3/8″ LP|
509535| 91361| 3711388
S60| 18″| 60| .050″| 3/8″ LP|
509536| —| 3711389
10‑10A, CP55, CP70, CP70L; DOUBLE EAGLE: 50, 80; EAGER BEAVER: 3.4, 3.7; MAC:
1‑10, 2‑10, 3‑10, 4‑10, 5‑10,
6‑10, 7‑10, 10‑10; PRO: 10‑10A; PRO MAC: 55, 555, 570, 5700, 60, 605, 610,
650, 655, 700, 800, 805, 850; SILVER
EAGLE: 3420, 3720; SUPER PRO: 60, 70,
80, 81; TITAN: 50, 57; TIMBER BEAR
| E60| 16″| 60| .050″| 3/8″|
27851| —| 2836361
E66| 18″|
66| .050″| 3/8″| 30159|
3848109| 3711368
E70| 20″| 70| .050″|
3/8″| 27850| 4921777| 4921784
E81| 24″| 81| .050″| 3/8″| —| —| —
MI L W A UK EE ™
| SAW CHAIN CADENA| BAR LENGTH
| DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
---|---|---|---|---|---|---|---|---
2527‑20| R28F| 6″| 28| .043″| 3/8″ LP| —| —| —
2727‑20| R56| 16″| 56| .043″|
3/8″ LP| 623000| 4921755|
3848115
2826‑20C| N51| 12″|
51DL| .043″| .325 LP| —| 4900186| —
2826‑20T| N59| 14″| 59DL| .043″| .325 LP| —| —| —
3004‑20| R33| 8″| 33|
.043″| 3/8″ LP| —| 3654371| —
POLE SAW | PODADORA DE ALTURA
2825‑20PS| R40| 10″| 40| .043″|
3/8″ LP| —| 4900187| —
OLEO-MAC ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
240, 241, 244
| S50| 14″| 50| .050″|
3/8″ LP| —| 4921758| —
S55|
16″| 55| .050″| 3/8″ LP| —| 4921759| —
250, 250A, 251, 252, 254, 260,
261, 264, 272, 280, 284, 355,
460, 461, 480, 481, 482
| E60| 16″| 60| .050″| 3/8″| —| —| —
E66| 18″|
66| .050″| 3/8″| —| 3848109| —
E70| 20″| 70| .050″|
3/8″| —| 4921777| —
E81| 24″| 81| .050″| 3/8″| —| —| —
OREGON ®| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
SELF‑SHARPENING CORDLESS CHAINSAW | MOTOSIERRA SIN CABLE AUTOAFILABLE
CS250, CS250‑S6, CS250‑E6, CS250‑A6
+ INDICATES REPLACEMENT GUIDE BAR ONLY. THIS ITEM IS NOT A BAR/CHAIN COMBO PACK.
+ INDICA SOLO LA BARRA GUÍA DE REPUESTO. ESTE ARTÍCULO NO ES UN PAQUETE COMBINADO DE BARRA Y CADENA.
|
560507
|
14″
|
52
|
.050″
|
3/8″ LP
|
1452A041 +
|
—
|
—
CS300‑E6, CS300‑A6
+ INDICATES REPLACEMENT GUIDE BAR ONLY. THIS ITEM IS NOT A BAR/CHAIN COMBO PACK.
+ INDICA SOLO LA BARRA GUÍA DE REPUESTO. ESTE ARTÍCULO NO ES UN PAQUETE COMBINADO DE BARRA Y CADENA.
|
560510
|
16″
|
56
|
.050″
|
3/8″ LP
|
1656A041 +
|
—
|
—
SELF‑SHARPENING ELECTRIC CHAINSAW | MOTOSIERRA ELÉCTRICA AUTOAFILABLE
CS1500
+ INDICATES REPLACEMENT GUIDE BAR ONLY. THIS ITEM IS NOT A BAR/CHAIN COMBO PACK.
+ INDICA SOLO LA BARRA GUÍA DE REPUESTO. ESTE ARTÍCULO NO ES UN PAQUETE COMBINADO DE BARRA Y CADENA.
|
571037
|
18″
|
62
|
.050″
|
3/8″ LP
|
1862A041 +
|
—
|
—
ELECTRIC CHAINSAW | MOTOSIERRA ELÉCTRICA
CS1200 , CS1400| S56| 16″| 56| .050″|
3/8″ LP| 27857| 4921764|
4921785
CORDLESS POLE SAW | SIERRA DE ALTURA SIN CABLE
PS250, PS250‑E6, PS250‑A6| R34| 8″| 34|
.043″| 3/8″ LP| —| 4921756| —
ELECTRIC POLE SAW | SIERRA DE ALTURA ELÉCTRICA
PS750| S33| 8″| 33| .050″|
3/8″ LP| —| 4921772| —
PARTNER| SAW CHAIN CADENA| BAR LENGTH| DRIVE
LINKS| GAUGE CALIBRE| PITCH PASO| BAR/CHAIN
COMBO| SAW CHAIN PART N0.| BAR/CHAIN COMBO
PART N0.
330, 350, 1601, 1602, 1610, 1611,
1612, 1613, 1614, 1616, MINI P, MINI PII, MINI PIII, SPARTAN
| S45| 12″| 45| .050″|
3/8″ LP| —| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| —| 4921760| —
S56|
16″| 56| .050″| 3/8″ LP| —| 4921764| —
365
| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP| —| 4921764| —
P360, P400, P450, P500, P5000
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| 577330| 4921763| 756153
550, 650, 1655, 2055, 7000, F50, F55, P50, P51, P55, P65, P70, P85, P100, R11,
R12, R14, R16, R17, R18, R19, R20, R21, R22, R23, R30, R35, R40, R416, R420,
R421, R435, R440, S50, S55, S65| E60| 16″| 60| .050″| 3/8″| —| —| —
E68| 18″| 68| .050″|
3/8″| —| 4921780| —
E72| 20″| 72| .050″|
3/8″| —| 4921773| —
PIONEER| SAW CHAIN CADENA| BAR LENGTH| DRIVE
LINKS| GAUGE| PITCH| BAR/CHAIN COMBO| SAW
CHAIN PART N0.|
BAR/CHAIN COMBO PART N0.
P‑10, P‑12
| S45| 12″| 45| .050″|
3/8″ LP| —| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| —| 4921760| —
S56|
16″| 56| .050″| 3/8″ LP| —| 4921764| —
1074, P‑21, P‑26, P‑28
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| —| 4921763| —
970, 1072, 1073, P‑11, P‑20,
P‑25, P‑285, 515
| E60| 16″| 60| .050″| 3/8″| —| —| —
E68| 18″| 68| .050″|
3/8″| —| 4921780| —
E72| 20″| 72| .050″|
3/8″| —| 4921773| —
E84| 24″| 84| .050″|
3/8″| —| 4900185| —
POULAN ™ / POULAN PRO ™| SAW CHAIN
CADENA| BAR LENGTH
| DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO| SAW CHAIN PART N0.
|
BAR/CHAIN COMBO PART N0.
---|---|---|---|---|---|---|---|---
PRCS16I| R56| 16″| 56| .043″|
3/8″ LP| —| 4921755| —
180, 190, 200, 205, 210, 220, 221, 222,
225, 235, 236, 240, 250, 255*, 260,
262, 400E, 1220, 1420, 1425, 1630, 1625,
1634, 1775, 1800, 1838, 1900, 1950, 1975,
2000, 2025, 2050, 2055, 2075, 2100,
2150, 2150 ‑ PREDATOR, 2155, 2160, 2175,
2200, 2250, 2300, 2350, 2375, 2400,
2450, 2500, 2550, 2555, 2600, 3314,
3314WS, 3314WSA, 3316, 3416, 3516,
3516AVX, 3816, 3816AV, 3818, 4018,
4218A, 4218AVX, 4218AV, BLACKHAWK, E14E, E16E, ES 350, ES 400, MICRO 25XX, XXV SERIES, P3516PR, PATRIOT 1900, PPB3416, PPB4218, PR3816, PR4016, PR4218, S23, S25, SUPER MICRO, 25 XX, XXV SERIES, WILDTHING, WOODSHARK
| S40| 10″| 40| .050″| 3/8″ LP| —|
4921766
| —
S45| 12″| 45| .050″|
3/8″ LP| 27792|
4921754
| —
S52|
14″| 52| .050″| 3/8″ LP| 27856|
4921760
|
4921783
S56| 16″| 56| .050″| 3/8″ LP| 27857|
4921764
|
4921785
|
18″
|
62
|
.050″
|
3/8″ LP
|
|
4921765
|
4921786
PL914| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
PL1416| S56| 16″| 56| .050″|
3/8″ LP| 27857| 4921764|
4921785
PLN1510| S39| 10″| 39|
.050″| 3/8″ LP| —| 109534| —
PLN1514| S49| 14″| 49|
.050″| 3/8″ LP| —| 91362| —
PLN3516F| S55| 16″| 55| .050″|
3/8″ LP| —| 4921759| —
285, 295, 305, 310, 315, 335, 336,
2700, 2750, 2775, 2800, 2900, 3000,
3050, 3100, 3300, 306SA, 4620,
4620AV, 4620AVX, PREDATOR
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| 36892| 4921768| —
H78| 20″| 78| .050″|
.325″| 37977| 4921763| 96403
203, 245, 306, 360, 361, 375, 395, 400,
450, 3400, 3700, 3800, 3900, 4000, 4200,
4400, 4900, 5200, 5400, 5500, 6700
| E60| 16″| 60| .050″| 3/8″|
27851| —| 2836361
E66| 18″|
66| .050″| 3/8″| 30159| 3848109|
3711368
E70| 20″| 70| .050″|
3/8″| 27850| 4921777|
4921784
E81| 24″| 81| .050″| 3/8″| —| —| —
6900, 7700, 8500
| E60| 16″| 60| .050″| 3/8″| —| —| —
E66| 18″|
66| .050″| 3/8″| —| 3848109| —
E70| 20″| 70| .050″|
3/8″| —| 4921777| —
E81| 24″| 81| .050″| 3/8″| —| —| —
415, 425, 445, 475, 505
| E60| 16″| 60| .050″| 3/8″| —| —| —
E66| 18″|
66| .050″| 3/8″| —| 3848109| —
E72| 20″| 72| .050″|
3/8″| —| 4921773| —
E81| 24″| 81| .050″| 3/8″| —| —| —
PP4818AVX| E66| 18″|
66| .050″| 3/8″| 30159| 3848109|
3711368
PP5020AV, PR5020
‡ CHOOSE THE REPLACEMENT PARTS IN THIS LINE ONLY IF THE ORIGINAL GUIDE BAR ON YOUR SAW BEEN REPLACED WITH AN OREGON REPLACEMENT GUIDE BAR AT THIS LENGTH.
| E70| 20″| 70| .050″| 3/8″| —|
4921777
| —
E72| 20″ ‡| 72|
.050″| 3/8″| 584271|
4921773
|
4921787
ES300, ES350| R56| 16″| 56| .043″|
3/8″ LP| —| 4921755| —
POLE SAW | PODADORA DE ALTURA
446T, PRO 445, PRO 446, PP258TP, PP258TPC, PP338PT, PP5000P|
R34| 8″| 34|
.043″| 3/8″ LP| —|
4921756
| —
PPB40PS| S33| 8″| 33| .050″|
3/8″ LP| —| 4921772| —
POWERHORSE ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH PASO| BAR/CHAIN
COMBO| SAW CHAIN PART N0.| BAR/CHAIN COMBO
PART N0.
190500, 190501, 190555| S52| 14″| 52| .050″|
3/8″ LP| 27856| 4921760|
4921783
S56|
16″| 56| .050″| 3/8″ LP|
27857| 4921764| 4921785
190556, 190558| S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
190502†, 190503†, 190557†, 190559†
† THE GAUGE (WIDTH) OF THE GUILD BAR RAILS ON THESE MODELS VARY FROM THE FACTORY. TO INSURE YOUR REPLACEMENT SAW CHAIN FEEDS CORRECTLY DOWN THE RAIL OF YOUR BAR, SELECT A CHAIN WITH A MATCHING GAUGE.
| H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| —| 4921763| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
J78| 20″| 78| .058″|
.325″| —| 3711374| —
REDMAX ™| SAW CHAIN CADENA| BAR LENGTH
| DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO| SAW CHAIN PART N0.
| BAR/CHAIN COMBO PART N0.
---|---|---|---|---|---|---|---|---
G250, G300AVS, G300TS, G2500, G2500TS, G3100TS, G3200EZ, G3300EZ, G3800, G3800AVS, GZ380, GZ400, GZ3500T, GZ4000
| S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP| 27857| 4921764| 4921785
S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
G621AVS
| E60| 16″| 60| .050″| 3/8″| —| —| —
E66| 18″|
66| .050″| 3/8″| —| 3848109| —
E70| 20″| 70| .050″|
3/8″| —| 4921777| —
GZ7000, GZ7100, G9000
| E68| 18″| 68| .050″|
3/8″| —| 4921780| —
E72| 20″| 72| .050″|
3/8″| —| 4921773| —
E84| 24″| 84| .050″|
3/8″| —| 4900185| —
PSZ2465S| S44| 12″| 44| .050″|
3/8″ LP| —| 4900190| —
G390, G450AVS, G455AVS, G530, G5000, G5000AVS, GZ550
INDICATES NARROW KERF.
| J56| 13″| 56| .058″| .325″| —| —| —
J64| 15″| 64|
.058″| .325″| —| 3654363| —
J66| 16″| 66| .058″|
.325″| —| 3711414| —
J72| 18″| 72| .058″|
.325″| —| 3711413| —
J78| 20″| 78| .058″|
.325″| —| 3711374| —
H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| —| 4921763| —
M66| 16″| 66| .050″|
.325″| 584410| 4921774| —
M72| 18″| 72| .050″|
.325″| 584408| 4921775| —
M78| 20″| 78|
.050″| .325″| —| 3654373| —
GZ4500
INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.
| M66| 16″| 66| .050″|
.325″| —| 4921774| —
M72| 18″| 72| .050″|
.325″| —| 4921775| —
POLE SAW | PODADORA DE ALTURA
PSZ2401, PSZ2450S, PSZ2460S| R44| 12″| 44|
.043″| 3/8″ LP| —| 3654366| —
PRO GZ25N, PSZ2500S| R44| 12″| 44|
.043″| 3/8″ LP| —| 3654366| —
REMINGTON ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
ES1512US, RM1215| S45|
12″| 45| .050″| 3/8″ LP| —| 4921754| —
M15012US| S48| 12″|
48| .050″| 3/8″ LP| —| 2546084| —
M15014AS, M15014US| S52| 14″| 52| .050″|
3/8″ LP| —| 4921760| —
100089‑06A, ES1514US, RM1415A, RM1415U, RM1425|
S50| 14″| 50| .050″|
3/8″ LP| —|
4921758
| —
RM4214| S53| 14″| 53| .050″|
3/8″ LP| —| 2546085| —
107624‑01, 107624‑02, 107625‑01,
107625‑02, 111174‑01, CLD3516AWB, CLD4016W, LD3516AWB, LD4016AW, RM1632A, RM1635W, RM1640W, RM1645
|
|
16″
|
56
|
.050″
|
3/8″ LP
|
—
|
4921764
|
—
M30016AS, M30016AS‑1, M30016US, M35016AS, M35016AW, RM1630A, RM1630U, RM1630W|
|
16″
|
58
|
.050″
|
3/8″ LP
|
—
|
3711359
|
—
RM4216| S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
111174‑01, CLD4018AW, CLD4018AWC, LD4018AW, LD4018WC, RM1840W, RM4218|
S62| 18″| 62| .050″|
3/8″ LP| —|
4921765
| —
RM4618, RM5118| H72| 18″| 72| .050″|
.325″| —| 4921768| —
RM4620, RM5520| H78| 20″| 78| .050″|
.325″| —| 4921763| —
RM0818B| R34| 8″| 34|
.043″| 3/8″ LP| —| 4921756| —
POLE SAW | PODADORA DE ALTURA
106821A WIZARD, 106890‑01,
106890‑02, PS1510A, RM1015SP, RM1025P, RM1025SPS, RM1035P
|
|
10″
|
40
|
.050″
|
3/8″ LP
|
—
|
4921766
|
—
RM4050, RM4050B| S33| 8″| 33| .050″|
3/8″ LP| —| 4921772| —
11409‑01 BRANCH WIZARD, RM0612P|
R28| 6″| 28| .043″|
3/8″ LP| —| —| —
104317, RM0815P, RM0818BPS| R34| 8″| 34|
.043″| 3/8″ LP| —| 4921756| —
RM2599| R34| 8″| 34|
.043″| 3/8″ LP| —| 4921756| —
RYOBI ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
RY5020, RY10518, RY10519, RY10520, RY10521|
H72| 18″| 72| .050″|
.325″| 36892| 4921768| —
H78| 20″| 78| .050″|
.325″| 37977| 4921763| 96403
RY3714, RY40530, RY40503| S52| 14″| 52| .050″|
3/8″ LP| 27856| 4921760|
4921783
RY3716| S56| 16″| 56| .050″|
3/8″ LP| 27857| 4921764|
4921785
RY3818, RY10532, ZRRY10532| S62| 18″| 62| .050″|
3/8″ LP| —| 4921765| —
P4360, RY43160, P4361| R33| 8″| 33|
.043″| 3/8″ LP| —| 3654371| —
P540, P540A, P540B, P542, P543, P545, P547, RY52003, RY52003A,
TP30 CS1800 18 VOLT CORDLESS
|
|
10″
|
40
|
.043″
|
3/8″ LP
|
—
|
4900187
|
—
RY40500, RY40510B| R45|
12″| 45| .043″| 3/8″ LP| —| 4900188| —
RY40502, RY40511| R52|
14″| 52| .043″| 3/8″ LP| —| 4900189| —
RY405100| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
POLE SAW | PODADORA DE ALTURA
PP720R, P542
| R34| 8″| 34|
.043″| 3/8″ LP| —| 4921756| —
R40| 10″| 40| .043″|
3/8″ LP| —| 4900187| —
SENIX
|
SAW CHAIN CADENA
DE LA SIERRA
|
BAR LENGTH
LONGITUD DE LA BARRA
|
DRIVE LINKS
ESLABÓN MOTRIZ
|
GAUGE CALIBRE
|
PITCH PASO
|
BAR/CHAIN COMBO
PAQUETE DE COMBINACIÓN DE CADENA/BARRA
|
SAW CHAIN PART N0.
CADENA DE LA SIERRA
NÚMERO DE PIEZA
|
BAR/CHAIN COMBO PART N0.
PAQUETE DE COMBINACIÓN DE CADENA/BARRA NÚMERO DE PIEZA
|
---|---|---|---|---|---|---|---|---|---
CS4QL‑L1| S62| 18″| 62| .050″|
3/8″ LP| —| 4921765| —|
SHINDAIWA ™
|
SAW CHAIN CADENA
DE LA SIERRA
|
BAR LENGTH
LONGITUD DE LA BARRA
|
DRIVE LINKS
ESLABÓN MOTRIZ
|
GAUGE CALIBRE
|
PITCH PASO
|
BAR/CHAIN COMBO
PAQUETE DE COMBINACIÓN DE CADENA/BARRA
|
SAW CHAIN PART N0.
CADENA DE LA SIERRA
NÚMERO DE PIEZA
|
BAR/CHAIN COMBO PART N0.
PAQUETE DE COMBINACIÓN DE CADENA/BARRA NÚMERO DE PIEZA
|
90, 100, 110, 120, 140, 150, 326T
| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —|
S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —|
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783|
S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —|
350, 352S, 357
| S53| 14″| 53| .050″|
3/8″ LP| —| 2546085| —|
S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —|
488, 500, 502S
| H66| 16″| 66| .050″| .325″| —| —| —|
H72| 18″| 72| .050″|
.325″| 36892| 4921768| —|
H78| 20″| 78| .050″|
.325″| 37977| 4921763| 96403|
305S| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783|
340S| S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —|
358TS
| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783|
S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —|
402S| S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786|
550, 575, 577, 680, 695,| E60| 16″| 60| .050″| 3/8″| —| —| —|
757, 757C, 757W*|
E66| 18″|
66| .050″| 3/8″| —| 3848109| —|
- PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR|
OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND|
E72| 20″| 72| .050″| 3/8″| —| 4921773| —|
GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH|
AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE|
WITH EACH OTHER.| - ANTES DE SELECCIONAR LAS PIEZAS DE REPUESTO PARA ESTOS MODELOS,|
E84| 24″| 84| .050″| 3/8″| —| | —|
CONSULTA EL MANUAL DEL PROPIETARIO Y ELIGE LAS PIEZAS QUE COINCIDAN| |
CON LAS ESPECIFICACIONES DE PASO Y CALIBRE DE FÁBRICA DE TU SIERRA. SE OFRECEN BARRAS Y CADENAS DE DIFERENTE PASO Y CALIBRE PARA LA SIERRA, PERO NO SON COMPATIBLES ENTRE SÍ.| 4900185|
491S
| H72| 18″| 72| .050″|
.325″| —| 4921768| —|
H78| 20″| 78| .050″|
.325″| —| 4921763| —|
591| E70| 20″| 70| .050″|
3/8″| 27850| 4921777| 4921784|
600SX
| E70| 20″| 70| .050″|
3/8″| 27850| 4921777| 4921784|
E81| 24″| 81| .050″| 3/8″| —| —| —|
SKIL ™
|
SAW CHAIN CADENA
DE LA SIERRA
|
BAR LENGTH
LONGITUD DE LA BARRA
|
DRIVE LINKS
ESLABÓN MOTRIZ
|
GAUGE CALIBRE
|
PITCH PASO
|
BAR/CHAIN COMBO
PAQUETE DE COMBINACIÓN DE CADENA/BARRA
|
SAW CHAIN PART N0.
CADENA DE LA SIERRA
NÚMERO DE PIEZA
|
BAR/CHAIN COMBO PART N0.
PAQUETE DE COMBINACIÓN DE CADENA/BARRA NÚMERO DE PIEZA
|
| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —|
1600, 1601, 1602, 1610, 1611, 1612,| S45| 12″| 45| .050″|
3/8″ LP| —| 4921754| —|
1613, 1614, 1616, 1700, 1705, 1712| S52| 14″| 52| .050″|
3/8″ LP| —| 4921760| —|
| S56|
16″| 56| .050″| 3/8″ LP| —| 4921764| —|
1620, 1622, 1624, 1634, 1635, 1636
| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —|
S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —|
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783|
S56|
16″| 56| .050″| 3/8″ LP| 27857| 4921764| 4921785|
S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786|
605, 606
| S52|
14″| 52| .050″| 3/8″ LP| —| 4921760| —|
S58| 16″| 58| .050″|
3/8″ LP| —| 3711359| —|
CS4555‑10| R52| 14″| 52| .043″|
3/8″ LP| —| 4900189| —|
1641
| E60| 16″| 60| .050″| 3/8″|
27851| —| 2836361|
E66| 18″|
66| .050″| 3/8″| 30159|
3848109| 3711368|
E70| 20″| 70| .050″|
3/8″| 27850| 4921777| 4921784|
E81| 24″| 81| .050″| 3/8″| —| —| —|
SOLO ™
|
SAW CHAIN CADENA
DE LA SIERRA
|
BAR LENGTH
LONGITUD DE LA BARRA
|
DRIVE LINKS
ESLABÓN MOTRIZ
|
GAUGE CALIBRE
|
PITCH PASO
|
BAR/CHAIN COMBO
PAQUETE DE COMBINACIÓN DE CADENA/BARRA
|
SAW CHAIN PART N0.
CADENA DE LA SIERRA
NÚMERO DE PIEZA
|
BAR/CHAIN COMBO PART N0.
PAQUETE DE COMBINACIÓN DE CADENA/BARRA NÚMERO DE PIEZA
|
600, 605, 606, 630, 633,| S45|
12″| 45| .050″| 3/8″ LP| —| 4921754| —|
635, 636, 637, 640, 643|
S52|
14″| 52| .050″| 3/8″ LP| —| 4921760| —|
- PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR|
OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND|
GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH|
AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE|
S56| 16″| 56| .050″| 3/8″ LP| —| 4921764| —|
WITH EACH OTHER.| - ANTES DE SELECCIONAR LAS PIEZAS DE REPUESTO PARA ESTOS MODELOS,|
CONSULTA EL MANUAL DEL PROPIETARIO Y ELIGE LAS PIEZAS QUE COINCIDAN|
CON LAS ESPECIFICACIONES DE PASO Y CALIBRE DE FÁBRICA DE TU SIERRA. SE| S62| 18″| 62| .050″| 3/8″ LP| —| 4921765| —|
OFRECEN BARRAS Y CADENAS DE DIFERENTE PASO Y CALIBRE PARA LA SIERRA,|
PERO NO SON COMPATIBLES ENTRE SÍ.|
603, 662, 665, 667, 675*,
| E60| 16″| 60| .050″| 3/8″| —| —| —|
E68| 18″| 68| .050″|
3/8″| —| 4921780| —|
680, 681, 690, 694, 760*|
- PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR|
E72| 20″| 72| .050″| 3/8″| —| 4921773| —|
OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND|
GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH|
AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE|
WITH EACH OTHER.|
E84| 24″| 84| .050″| 3/8″| —| 4900185| —| - ANTES DE SELECCIONAR LAS PIEZAS DE REPUESTO PARA ESTOS MODELOS,|
CONSULTA EL MANUAL DEL PROPIETARIO Y ELIGE LAS PIEZAS QUE COINCIDAN|
CON LAS ESPECIFICACIONES DE PASO Y CALIBRE DE FÁBRICA DE TU SIERRA. SE|
OFRECEN BARRAS Y CADENAS DE DIFERENTE PASO Y CALIBRE PARA LA SIERRA,|
P60| 16″| 60| .058″| 3/8″| —| —| —|
PERO NO SON COMPATIBLES ENTRE SÍ.|
| H66| 16″| 66| .050″| .325″| —| —| —|
651, 651SP, 652| H72| 18″| 72| .050″| .325″| —| 4921768| —|
INDICATES NARROW KERF.| H78| 20″| 78| .050″| .325″| —| 4921763| —|
INDICA UN CORTE ESTRECHO.|
|
| J66| 16″| 66| .058″| .325″| —| 3711414| —|
OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND|
GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH|
AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE|
J72| 18″| 72| .058″| .325″| —| 3711413| —|
WITH EACH OTHER.|
|
|
|
J78| 20″| 78| .058″| .325″| —| 3711374| —|
|
|
| M72| 18″| 72| .050″| .325″| 584408| 4921775| —|
633, 636| R56| 16″| 56| .043″| 3/8″ LP| —| 4921755| —|
STIH L ™| SAW CHAIN CADENA| BAR LENGTH| DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO| SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
---|---|---|---|---|---|---|---|---
021, 025, 025C, MS230, MS230C‑BE, MS241C‑M, MS250, MS250C, MS250C‑BE, MS251, MS251C, MS251C‑BE*
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| S44| 12″| 44| .050″|
3/8″ LP| —| 4900190| —
S50| 14″| 50| .050″|
3/8″ LP| 105667| 4921758| 790029
S55|
16″| 55| .050″| 3/8″ LP|
105668| 4921759| 790028
L62 , V62|
16″| 62| .063| .325″| —| 3654364, —| —
L68 , V68|
18″| 68| .063| .325″| —| 3654365, —| —
038, 038 SUPER, 042, 044, 044 MAGNUM,
046, 046 MAGNUM, 048, 056, MS440, MS441, MS460, MS460 MAGNUM, MS461, 066, MS660, MS661, 064*
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| E60| 16″| 60| .050″| 3/8″| —| —| —
E66| 18″|
66| .050″| 3/8″| —|
3848109
| —
E72| 20″| 72| .050″|
3/8″| —|
4921773
| —
E84| 24″| 84| .050″|
3/8″| —|
4900185
| —
MS270, MS270C, MS271, MS280, MS280C, MS280C‑BQ, WOOD BOSS™|
L67 ,
V67| 16″|
67| .063| .325″| 105669| 4921757,
3848114| 3711378
L74 ,
V74| 18″|
74| .063| .325″| 105670|
4921762, 3848113| 3848107
L81 ,
V81| 20″|
81| .063| .325″| 105671| 2546087, 3848112| 3711380
024, 026, 026P, 028, 028 SUPER*,
029, 034, 034 SUPER, 036, 036QS*,
039, FARM BOSS™, MS260, MS260 PRO, MS261, MS261C‑M, MS261CM‑Q, MS261C‑Q, MS290, MS291, MS291C‑BEQ, MS360, MS390, MS391
* PRIOR TO SELECTING REPLACEMENT PARTS FOR THESE MODELS, CONSULT YOUR OWNERS MANUAL AND CHOOSE THE PARTS THAT MATCH THE FACTORY PITCH AND GAUGE SPECIFICATIONS OF YOUR SAW. BARS AND CHAINS OF DIFFERENT PITCH AND/OR GAUGE ARE OFFERED FOR YOUR SAW BUT ARE NOT CROSS‑COMPATIBLE WITH EACH OTHER.
| L67 ,
V67| 16″|
67| .063| .325″| 105669| 4921757,
3848114| 3711378
L74 ,
V74| 18″|
74| .063| .325″| 105670|
4921762, 3848113| 3848107
L81 ,
V81| 20″|
81| .063| .325″| 105671| 2546087, 3848112| 3711380
E60| 16″| 60| .050″| 3/8″| —| —| —
E66| 18″|
66| .050″| 3/8″| —| 3848109| —
E72| 20″| 72| .050″|
3/8″| —| 4921773| —
E84| 24″| 84| .050″|
3/8″| —| 4900185| —
E20, E220, MSE220, MS310, MS311, MS361, MS361C‑B, MS361C‑Q, MS362, MS362C|
E60| 16″| 60| .050″| 3/8″| —| —| —
E66| 18″|
66| .050″| 3/8″| —| 3848109| —
E72| 20″| 72| .050″|
3/8″| —| 4921773| —
E84| 24″| 84| .050″|
3/8″| —| 4900185| —
POLE SAW | PODADORA DE ALTURA
HT70†, HT73†, HT75†, HT100†, HT101†, HT130†, HT131†, HT250†
† THE GAUGE (WIDTH) OF THE GUILD BAR RAILS ON THESE MODELS VARY FROM THE FACTORY. TO INSURE YOUR REPLACEMENT SAW CHAIN FEEDS CORRECTLY DOWN THE RAIL OF YOUR BAR, SELECT A CHAIN WITH A MATCHING GAUGE.
| S44| 12″| 44| .050″|
3/8″ LP| —| 4900190| —
S50| 14″| 50| .050″|
3/8″ LP| 105667| 4921758| 790029
S55|
16″| 55| .050″| 3/8″ LP|
105668| 4921759| 790028
R44| 12″| 44|
.043″| 3/8″ LP| 540389| 3654366| —
R50| 14″| 50| .043″|
3/8″ LP| —| 4921779| —
R55| 16″| 55| .043″|
3/8″ LP| —| 4921778| —
009, 009L, 010, 011, 012, 015, 020, 023,
311Y, E10, E14, MS181C, MS200, MS200T, MS201C, MS201 C‑E, MS201T, MS210, MS210C, MS210 C‑BE, MS211, MS211 C‑BE, MSE170 C‑BQ, MSE200, MSE210 C‑BQ
| S44| 12″| 44| .050″|
3/8″ LP| —| 4900190| —
S50| 14″| 50| .050″|
3/8″ LP| 105667| 4921758| 790029
S55|
16″| 55| .050″| 3/8″ LP|
105668| 4921759| 790028
017†, 018†, 019 T†, E140†, MS170†, MS171†, MS180C‑B†, MS180C‑BE†, MS180C†,
MS191T†, MS192†, MS192C‑E†, MS192T C‑E†, MS192T†, MS193†, MSE140 C‑BQ†,
MSE140†, MSE140C†, MSE180 C‑BE†
† THE GAUGE (WIDTH) OF THE GUILD BAR RAILS ON THESE MODELS VARY FROM THE FACTORY. TO INSURE YOUR REPLACEMENT SAW CHAIN FEEDS CORRECTLY DOWN THE RAIL OF YOUR BAR, SELECT A CHAIN WITH A MATCHING GAUGE.
| S44| 12″| 44| .050″|
3/8″ LP| —| 4900190| —
S50| 14″| 50| .050″|
3/8″ LP| 105667| 4921758| 790029
S55|
16″| 55| .050″| 3/8″ LP|
105668| 4921759| 790028
R44| 12″| 44|
.043″| 3/8″ LP| 540389| 3654366| —
R50| 14″| 50| .043″|
3/8″ LP| —| 4921779| —
R55| 16″| 55| .043″|
3/8″ LP| —| 4921778| —
SUN JOE ™| SAW CHAIN| BAR LENGTH| DRIVE
LINKS
| GAUGE CALIBRE| PITCH| BAR/CHAIN COMBO| SAW CHAIN PART N0.
| BAR/CHAIN COMBO PART N0.
SWJ800E, SWJ802E, ION8PS, SWJ806E| S33| 8″| 33| .050″|
3/8″ LP| —| 4921772| —
SWJ803E| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —
20VION‑CS10| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —
SWJ698E| S45| 12″| 45| .050″|
3/8″ LP| —| 4921754| —
SWJ699E| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
ION16CS| S56| 16″| 56| .050″|
3/8″ LP| 27857| 4921764|
4921785
SWJ700E| S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
SWJ701E| S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
T A NA K A ™| SAW CHAIN CADENA| BAR
LENGTH| DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN
COMBO| SAW CHAIN PART N0.| BAR/CHAIN COMBO
PART N0.
---|---|---|---|---|---|---|---|---
TCS33EDTP12, TCS33EDTP14
| S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
TCS3301PFS, TCS33EB, TCS3351PFS, TCS3401
| S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
S62| 18″| 62| .050″|
3/8″ LP| —| 4921765| —
ECV4501, ECS‑4000, ECS‑4000B
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| 37977| 4921763| 96403
TCS51EAP
| M66| 16″| 66| .050″|
.325″| —| 4921774| —
M72| 18″| 72| .050″|
.325″| —| 4921775| —
H78| 20″| 78| .050″|
.325″| 37977| 4921763| 96403
TCS40EA
INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.
| M66| 16″| 66| .050″|
.325″| —| 4921774| —
M72| 18″| 72| .050″|
.325″| —| 4921775| —
ECV560
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| 577330| 4921763| 756153
T ORO ™
| SAW CHAIN CADENA| BAR LENGTH| DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO| SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
51100, 51140
| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —
S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP| —| 4921764| —
51850| R56| 16″| 56| .043″|
3/8″ LP| —| 4921755| —
TROY- BI L T ™
| SAW CHAIN CADENA| BAR LENGTH| DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO| SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
TB4016, TB4216, TB4218
| S54| 16″| 54| .050″| 3/8″ LP|
509535| 91361| 3711388
S60| 18″| 60| .050″| 3/8″ LP|
509536| —| 3711389
TB4018
| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP|
27857| 4921764| 4921785
S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
TB3516 ELECTRIC, TB4516 ELECTRIC| S55| 16″| 55| .050″|
3/8″ LP| —| 4921759| —
TB4620, TB4920, TB5018, TB5020, TB5518
INDICATES NARROW KERF. INDICA UN CORTE ESTRECHO.
| H66| 16″| 66| .050″| .325″| —| —| —
H72| 18″| 72| .050″|
.325″| —| 4921768| —
H78| 20″| 78| .050″|
.325″| —| 4921763| —
M66| 16″| 66| .050″|
.325″| 584410| 4921774| —
M72| 18″| 72| .050″|
.325″| 584408| 4921775| —
M78| 20″| 78|
.050″| .325″| —| 3654373| —
POLE SAW | PODADORA DE ALTURA
TBPS| S34| 8″| 34| .050″| 3/8″ LP| —| —| —
TBPS‑8 DL| R34| 8″| 34|
.043″| 3/8″ LP| —| 4921756| —
WEN / WAGNER ™
| SAW CHAIN CADENA| BAR LENGTH| DRIVE LINKS|
GAUGE| PITCH| BAR/CHAIN COMBO| SAW CHAIN PART
N0.| BAR/CHAIN COMBO PART N0.
---|---|---|---|---|---|---|---|---
4019| S33| 8″| 33| .050″|
3/8″ LP| —| 4921772| —
1100 (TYPE 1), 1200 (TYPE 1),
1400 (TYPE 1)
| S49| 12″| 48| .050″|
3/8″ LP| —| 91362| —
S54| 14″| 54| .050″| 3/8″ LP| —| 91361| —
3814, 4014
| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S56|
16″| 56| .050″| 3/8″ LP|
27857| 4921764| 4921785
1100, 1200, 1400, 2000, 2400, 2600,
2700, 5000, 5008, 5010, 5014, 5016, BUMBLE BEE, HORNET, WASP
| S49| 12″| 49| .050″|
3/8″ LP| —| 91362| —
S53| 14″| 53| .050″|
3/8″ LP| —| 2546085| —
S58| 16″| 58| .050″|
3/8″ LP| —| 3711359| —
6014, 6016, LUMBERJACK
| S49| 14″| 49| .050″|
3/8″ LP| —| 91362| —
S55|
16″| 55| .050″| 3/8″ LP| —| 4921759| —
3816, 3818, 4016
| S54| 16″| 54| .050″| 3/8″ LP|
509535| 91361| 3711388
S60| 18″| 60| .050″| 3/8″ LP|
509536| —| 3711389
WESTERN AUTO ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.
|
BAR/CHAIN COMBO PART N0.
1800, 2000, 525 DA, AV14, AV16, CAT
17, WIZ:010, WIZ:012, WIZ:014, WIZ:110, WIZ:112, WIZ:212, WIZ:214, WIZ:316
| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —
S45| 12″| 45| .050″|
3/8″ LP| 27792| 4921754| —
S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
3400, 430, B013, WIZARD AV18
| E60| 16″| 60| .050″| 3/8″|
27851| —| 2836361
E66| 18″|
66| .050″| 3/8″| 30159| 3848109| —
E70| 20″| 70| .050″|
3/8″| 27850| 4921777|
4921784
WORX ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE| PITCH| BAR/CHAIN COMBO|
SAW CHAIN PART N0.| BAR/CHAIN COMBO PART N0.
WG300, WG303, WG303.1, WG304, WG304.1|
S53| 14″| 53| .050″|
3/8″ LP| —| 2546085| —
S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
S63| 18″| 63|
.050″| 3/8″ LP| —| 3654368| —
WG309| S40| 10″| 40| .050″|
3/8″ LP| —| 4921766| —
WG310| S34| 8″| 34| .050″| 3/8″ LP| —| —| —
WG305, WG305.1| S52| 14″| 52| .050″|
3/8″ LP| 27856| 4921760|
4921783
WG307 JAWSAW, WG308 JAWSAW POLE SAW, WG320 JAWSAW, WG321 JAWSAW| A42|
6″| 42| .050″| 1/4″| —| —| —
YARDWORKS ™| SAW CHAIN CADENA| BAR LENGTH|
DRIVE LINKS| GAUGE CALIBRE| PITCH PASO|
BAR/CHAIN COMBO| SAW CHAIN PART N0.| BAR/CHAIN
COMBO PART N0.
7.5A ELECTRIC CHAINSAW AND POLE SAW| S40| 10″| 40| .050″|
3/8″ LP| —|
4921766
| —
9A ELECTRIC, 10A ELECTRIC,
11A ELECTRIC
| S52|
14″| 52| .050″| 3/8″ LP| 27856| 4921760| 4921783
S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
12A ELECTRIC| S57| 16″| 57| .050″|
3/8″ LP| —| 4921767| —
13A ELECTRIC| S62| 18″| 62| .050″|
3/8″ LP| 39272| 4921765|
4921786
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>