DOWINX LS-66LED RGB Gaming Chair with LED Lights Instruction Manual
- June 17, 2024
- DOWINX
Table of Contents
DOWINX LS-66LED RGB Gaming Chair with LED Lights
Product Usage Instructions
Specifications
- Product Name: LS-66LED Series
- Recommended Number of Installers: 2
Safety Precautions
The safety precautions provided are crucial to prevent harm or damage to users or others. Please carefully observe and adhere to the following instructions:
- Prevention of Harm: Ignoring the instructions and using the product incorrectly can result in serious injury.
- Cause of Suffocation: Do not cover your head with the plastic bag used for packaging.
- Cause of Explosion: Do not disassemble or lubricate the gas cylinder. Avoid exposing the gas cylinder to fire or incineration.
- Cause of Fall: Avoid standing on the chair, using it as a stepping stone, or placing it in an unstable position. Do not sit on armrests, lean on the backrest, or sit on only part of the seat. Do not use the chair on slippery floors.
- Cause of Poisoning: Incineration may produce toxic gases.
- Cause of Injury or Damage: Assemble the product on a stable, flat surface. Be cautious with casters and reclining parts to prevent hand injuries. Pay attention to your surroundings when turning the chair.
- Cause of Discoloration and Deformation: Avoid outdoor use or exposure to moisture to prevent malfunction, rust, or discoloration. Keep away from direct sunlight, heat sources, significant humidity, or dryness.
Maintenance Instructions:
- Care of Upholstery:
- Gently scrub the surface with a soft brush or use a vacuum cleaner to remove dust.
- For cleaning, dab with a soft cloth dampened with diluted neutral detergent and wipe off with a damp towel.
- Care of Metal and Resin Parts:
- Wipe with a soft dry cloth. For dirt, use diluted neutral detergent, wipe with a wrung cloth, and finish with a dry cloth to remove residue.
Recommended number of installers: 2
Safety Precautions
The precautions written here are to prevent harm or damage to you or others.
All of these are important contents for safe use, so be sure to observe them.
WARNING
- Ignoring this instruction and using the product incorrectly may result in serious injury.
ATTENTION
- Ignoring this instruction and using the product incorrectly may result in injury or property damage.
WARNING
CAUSE OF SUFFOCATION
- Do not cover your head with the plastic bag used for packaging.
CAUSE OF EXPLOSION
- Do not disassemble or lubricate the gas cylinder.
- Do not put the gas cylinder into fire.
- Do not incinerate.
CAUSE OF FALL
- Do not stand on the chair, use it as a stepping stone, or place it in an unstable position.
- Do not sit on the armrests or lean on the backrest, or sit on only part of the seat.
- Do not use the chair on slippery floors.
CAUSE OF POISONING
- Incineration may produce toxic gases.
ATTENTION
CAUSE OF INJURY OR DAMAGE
- Be sure to assemble on a stable, flat surface.
- Be careful not to get your hands or fingers caught in the casters or reclining parts.
- When turning the chair, pay attention to your surroundings
- Do not use it for anything other than its intended purpose.
CAUSE OF DISCOLORATION AND DEFORMATION
- This product is for indoor or indoor use.
- Outdoor use or getting wet may cause malfunction, rust or discoloration.
- Avoid using the product in a place exposed to direct sunlight or heat such as a stove, or in a place with significant humidity or dryness.
- In addition to the above, please be sure to avoid other dangerous behaviors.
Care of Upholstery:
- Gently scrub the surface with a soft brush, or use a vacuum cleaner to remove dust from seams and crevices.
- If it gets dirty, just dab it with a soft cloth dampened with a small amount of diluted neutral detergent. Then, wipe off the cleaner with a towel dampened with a little water.
Care of Metal and Resin Parts:
- Wipe with a soft dry cloth. If it gets dirty, wipe it with a diluted neutral detergent, then wipe it with a wrung cloth, and then wipe it with a dry cloth to completely remove the detergent and water.
After-sale Policy
【Manufacturer warranty】
365 days of quality assurance
- Within 365 days from the date of order, if there is a failure or breakdown under the conditions of use in accordance with the instruction manual, we will replace the parts for free, or replace the product at our discretion.
- The following cases are not covered by the warranty even within the warranty period (paid maintenance).
- Damage caused by transportation, movement, drop and other reasons after delivery.
- Malfunctions caused by failure to observe the precautions or specified conditions stated in the instruction manual, labels, packaging, etc., or malfunctions caused by incorrect use exceeding the limits.
- Product damage repaired by anyone other than the our company or the designated supplier.
- Damage caused by natural disasters such as earthquakes, fires, lightning strikes, wind disasters, floods, salt damage, or other external factors.
- If the warranty card or order number is presented, the warranty period cannot be confirmed.
- Leather (fabric) wear, synthetic leather hydrolysis or hardening, genuine leather discoloration or cracking, sun fading, etc.
- Abrasions, scratches, stains, discoloration, etc. caused by daily use.
- Wear on casters, etc.
- In the case of other defects caused by the negligence of the customer.
30-day Return and Money Back Guarantee
(Non-Amazon orders follow the rules of the corresponding platform)
- Refunds will be processed automatically upon return of the product to Amazon’s designated location within 30 days of the date of your order, as long as you follow Amazon’s return policy instructions.
- Please refer to the above link for the return method and return conditions.
- Original manufacturer packaging is required for returns. Please do not discard the original boxes.
【Other notes】
- The warranty information on this page promises to repair the product free of ctharge within the warranty period and conditions specified in the instruction manual.
- The warranty information provided on this page does not limit your legal rights, so if you have any questions about repairs after the warranty period , please contact us by email.
- 365-day quality assurance is a service that provides support (guarantee) for 365 days from the date of your order. After ordering a new replacement product, the warranty period will not be extended again.
- When lending or transferring our products to a third party, be sure to attach the order number and instruction manual together. In addition, we are not responsible for any trouble caused by the act of lending or transferring.
- After-sales service rights such as return and replace are applicable only to the customer who purchased the product.
- After-sales service rights are not transferred even if the product is lent or transferred to a third party.
- When replacing parts or products, we may use alternatives with a different appearance.
- If the warranty has expired, we will provide after-sales service, but the customer will bear the freight and other costs.
- The warranty information on this page is valid only in NA.
- Except for special circumstances, the warranty provided on this page is valid only for the personal use of the product.
- If you would like to replace the product under warranty, you must return the original product to us. After confirmation by our customer support, you need to return the product within a certain period of time. Please note that if you change the time of return without contacting us in advance, you may not be covered by the warranty.
- We do not provide repair services.
- We do not sell assembled products.
About Your Personal Information
The Company and its affiliated companies (hereinafter referred to as “the Company”) will handle personal information (hereinafter referred to as “personal information”) such as the customer’s name and address provided by the customer as follows.
- We will use your personal information to respond to inquiries about our products, repair and confirm them, develop new products, etc., and keep a record of the contents of your consultation for these purposes. there is.
- Personal information will not be disclosed or provided to third parties outside the company, except when the company entrusts a cooperative company to carry out maintenance, it is necessary to perform business or exercise the authority stipulated by laws and regulations, or there are other legitimate purposes
- When the person requests disclosure of personal information, we will disclose it to the person without delay. If you wish to be notified of the purpose of use of personal information, correct, add, delete, stop using, or stop providing to third parties, please ontact us at our email address.
Point of Assembly
How to tighten screws
Do not tighten the screws from the beginning
- Tighten all the screws only in halfway at the beginning of the assembly, otherwise the screws might not be aligned with the screw holes and cause further distortion of the chair.
- Temporarily tighten all screws to 80%
- Finally, tighten all the screws firmly.
How to tighten the diagonal screws
- Install the first screw into any hole and then install the second screw diagonally.
- Install the remaining screws.
Please lay the carpet
To protect the floor, place a rug under the unit as shown in the illustration.
- Thick cloth
- Packing cardboard, etc.
Parts Checking
- In the event of missing parts or initial failure, please contact our customer support.
- Armrest surface screws pre-installed.
Assembly
Installation of Base
Insert the Base-2 to Base-1 as shown.
- Base-1: part like a pentagram, Base -2: slender rod
- First, loosely insert the Base-2 into the correct position. Please do not fully insert the Base-2 yet to avoid pinching your fingers. Then press the base -1 from above and securely install the base -2.
Installation of Casters and Gas Cylinder
Turn the base over and insert the casters firmly.
Insert the gas cylinder and cover into the base as shown.
- To prevent the wheels from coming off, it is a bit difficult to insert.
- The cylinder coated with lubricating oil. Be careful not to get your hands, clothed, or floor dirty.
Assembled Armrest
- First, please remove the screws that are temporarily tightened.
- Screw the armrest surface to the armrest post (two screws)
Installation of tilt mechanism and armrest
Firstly, remove the all screws attached to the bottom. Attach the tilt mechanism and armrests to the cushion, then tighten each of the removed screws to their original positions.
- Point the front mark on the base to the guide rail.
- Note the distinction between the left and right armrest.
Installation of Cushion
- Assemble the upper and lower parts of the chair as shown.
- If lack of energy, or install it by yourself, please place the upper side of the chair on the ground, insert the gas cylinder into the tilt mechanism, and pick up the chair.
Installation of Backrest
Adjustable headrest and Installation of Lumbar Pillow
- The headrest can be adjusted up and down within a certain range according to your height.
- Fix the lumbar pillow as shown.
- The lumbar pillow belt is passed through the gap between the backrest and fixed.
Power cord connection
- LED power cord can be connected to power bank or USB port.
- The bottom of the cushion can fix the power bank.
- Input parameters for normal use: voltage 5V, current 2A.
Note
- This concludes the assembly. Please confirm whether there is shaking, deformation, etc.
- Then tighten all screws.
Function Description
height adjustment
Armrest adjustment function
reclining function
Customer Service
Customer service✉: Dowinx@vip.126.com
We will get back to you as soon as possible.
Please be sure to provide us with the necessary information above.
We will properly handle the personal information we receive, please check the policy for details.
If you have any questions about our products or our policies, please feel free to contact us.
© 2023 Dowinx Components, Inc. All rights reserved.
Dowinx and the language logo are registered trademarks in the United States
and/or other countries.
The appearance patent of LS-66LED has been registered in the United States,
Europe and Japan.
Product may vary slightly from those pictured.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>