FENIX LD30R High Performance Outdoor Flashlight Instruction Manual
- June 15, 2024
- FENIX
Table of Contents
- LD30R High Performance Outdoor Flashlight
- FENIX LD30R FLASHLIGHT
- OPERATING INSTRUCTIONS
- TECHNICAL PARAMETERS
- BATTERY SPECIFICATIONS
- BATTERY REPLACEMENT
- CHARGING
- BATTERY LEVEL INDICATION
- INTELLIGENT OVERHEAT PROTECTION
- LOW-VOLTAGE WARNING
- USAGE AND MAINTENANCE
- INCLUDED
- FENIXLIGHT LIMITED
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LD30R High Performance Outdoor Flashlight
LD3OR HIGH-PERFORMANCE OUTDOOR FLASHLIGHT
| 1700 LUMENS MAX OUTPUT
---|---
| 267 METERS MAX BEAM DISTANCE
WARNING
- DO place this flashlight out of the reach of children!
- Do NOT shine the flashlight directly into the eyes of anyonet
- D0 NOT place light head near flammable objects, high temperatures can cause objects to overheat and become flammable/ignitet
- Do NOT use the flashlight in inappropriate ways such as holding the unit in your mouth, doing so could cause serious personal injury or death if the flashlight or intemal battery fails!
- This flashlight will accumulate a significant amount of heat while operating, osulting in a high temperature of the flashlight shell. Pay close attention to avoid bums.
- Remove the battery from the flashlight to prevent accidental activation when the flashlight is placed in a closed-in and flammable environment such as pockets and backpacks!
- The LED of this flashlight is not replaceable; so the whole flashlight will need to be replaced when the LED reaches the end of its lifespan.
FENIX LD30R FLASHLIGHT
- 1700 lumens maximum output and 267 meters beam distance.
- Uses one Luminus SST40 LED with a lifespan of 50,000 hours.
- Multiple output levels assist lighting needs required in various scenarios.
- The tactical tail switch controls the momentary and constant on/off functions.
- The neck-mounted side switch controls brightness selection, SOS mode, and Strobe mode.
- The SOS mode and Strobe mode can enhance user’s safety in various outdoor activites.
- Battery level indication LED and low-voltage warning.
- Universal USB Type-C charging port.
- Included is one ARB-L 18-3400 battary.
- Two-way body clip for versalile attachment.
- The Fenix LOSOR ts compatible with the Fenix AOD-S V2.0 diffuser tip, which could be used in outdoor camping.
- Intelligent overheat protection circuitry fo protect against high surface temperatures.
- All-metal CNC machined light body.
- Premium type HAIII hard-anodized anti-abrasive finish.
- P68 rated protection.
- Size: 5.11″ « 1.04″ x 0.89°/129.7 x 26.5 x 22.6 mm.
- iWeight: 4.66 02/132 g (including battery).
OPERATING INSTRUCTIONS
On/off
Tap the tail switch to momentarily tum on the flashlight, release it and the
light will go out.
Fully press the tail switch to turn on or tum off the flashlight.
Mode switching
With the light switched on, press and hold the side switch for 0.5 seconds to
enter the Flash Mode, press and hold the side switch for 0.5 seconds once
again to return to the General Mode.
TECHNICAL PARAMETERS
ANSI/PLATO FL1 | GENERAL MODE | FLASH MODE |
---|---|---|
TURBO | HIGH | MED |
SOS
OUTPUT| 1700 lumens| 600 lumens| 150 lundiens| 50 lumens| 1 lumen| 1700
lumens| 50 lumens
RUNTIME| 2 hours
10 minutes*| 2 hours
50 minutes| 14 hors 40 min| 37 hours
25 minutes| 750 hours| /| /
DISTANCE| 267 meters| 161 meters| 80 meters| 45 meters| 8 meters| /| /
INTENSITY| 18037 candela| 6500 candela| 1605 caihdela| 510 candela| 16
candela| /| /
IMPACT RESISTANCE| 1 meter
SUBMERSIBLE| IP68
Note: The above specifications are the test results produced by Fenix through
its laboratory testing t= the Fenix ARB-L18-3400 battery under the temperature
of 2143°C and humidity of 50% – 80%.
The true performance of this product may vary according to different working
environments and thelactual battery used.
*The Turbo output is measured in total of runtime including output at reduced levels due to the builtjin temperature protection mechanism.
Output Selection
General Mode:
With the light switched on, single click the side switch to cycle through
Moonlight>Low —Med—High—Turbo.
Flash Mode:
With the light switched on, press and hold the side switch for 0.5 seconds to
enter Strobe, single click the side switch to cycle through Strobe-SOS.
Intelligent Memory Circuit
The flashlight automatically memorizes the last selected output of General
Mode.
When turned on again the previously used output of General Mode will be
recalled.
BATTERY SPECIFICATIONS
Type| Dimension| Nominal Voltage| Usability|
---|---|---|---|---
Fenix ARB-L18 Series| 18650| 3.6 V| Recommended|
Non-rechargeable Battery (Lithium)| CR123A| 3.0 V| Usable|
Rechargeable Battery (Li-ion)| 18650| 3.6 V/3.7 V| Caution| !
Rechargeable Battery (Li-ion)| 16340| 3.6 V/3.7 V| Banned| X
Rechargeable Battery (LiFePO4)| 18650| 3.2 V| Banned| X
Warning: Do not mix batteries of different brands, sizes, capacities or types. Doing so may cause damage to the flashlight or to the batteries being used. *18650/16340 rechargeable Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only using quality batteries with circuit protection will reduce the potential for combustion or explosion. Cell damage or short circuiting caused by using these types of battery is considered user induced damage and is not covered by any Fenix warranty or liability.
BATTERY REPLACEMENT
Unscrew the light body and insert the battery with the anode side (+) towards the light head, then screw the light body back on.
CHARGING
- With the flashlight switched off, open the anti-dust cover to reveal the charging port, then connect the USB Type-C end of the charging cable to the flashlight.
- The indicator will display red while charging, and will turn to green when fully charged.
- Once charging is completed, be sure to close the anti-dust cover.
- With the flashlight switched off, the normal charging time of the Fenix ARB-L18-3400 battery is about 3 hours from depleted to fully charged with a 5 V/2 A charging adapter. Only Moonlight output and Low output can be operated while charging.
- Recharge a stored light every four months to maintain optimum performance of the battery.
BATTERY LEVEL INDICATION
Each time the light is turned on, the battery level indicator in the middle of
the switch
will automatically display the battery status for 3 seconds.
Green light on: saturated 100% – 85%
Green light flashes: sufficient 85% – 50%
Red light on: poor 50% – 25%
Red light flashes: critical 25% – 1%
Note: This feature only works with a Fenix ARB-L18 Series rechargeable
battery.
INTELLIGENT OVERHEAT PROTECTION
The flashlight will accumulate a lot of heat when used at high output levels for extended periods. The light will automatically step down a few lumens to reduce the temperature to a safe level when this situation occurs.
LOW-VOLTAGE WARNING
When the voltage level drops below 3.0 V, the flashlight is programmed to
downshift to a lower brightness level until Moonlight output is reached. When
this happens in Moonlight output, the battery level indicator blinks red to
remind you to replace or recharge the battery. To ensure normal use, the
flashlight will not turn off automatically and will work till the battery
level runs out.
Note: This feature only works with a Fenix ARB-L18 Series rechargeable
battery.
USAGE AND MAINTENANCE
- Disassembling the sealed head can cause damage to the light and will void the warranty.
- Fenix recommends using an excellent quality battery.
- If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
- Remove the battery to prevent accidental activation during storage or transportation.
- Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
- Periodic cleaning of the battery contacts improves the lamp’s performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
A: Poor battery level.
Solution: Replace or recharge the battery (Ensure the battery is inserted
according to the manufacturer’s specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing
alcohol.
If the above methods don’t work, please contact your authorized distributor.
INCLUDED
Fenix LD30R flashlight, ARB-L18-3400 battery, USB Type-C charging cable, Lanyard, Holster, Spare O-ring, User manual, Warranty card
LIGHTING FOR EXTREMES
|
---|---
https://www.facebook.com/fenixproducts/|
http://weixin.qq.com/r/EUSfh5zE7MGTrdjk9xED
“Follow” us for more information about Fenix.
FENIXLIGHT LIMITED
Tel: +86-755-29631163/83/93
Fax: +86-755-29631181
E-mail: info@fenixlight.com
Web: www.fenixlight.com
Address: 2F/3F, West of Building A, Xinghong Technology Park, 111 Shuiku Road,
Fenghuanggang Community, Xixiang Street, Bao’an District, Shenzhen City,
Guangdong Province, China
61.149.221.088-A0-20230814
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>