Kdln ATOMIUM CEILING US Suspension Lamp Instruction Manual
- June 17, 2024
- kdln
Table of Contents
Kdln ATOMIUM CEILING US Suspension Lamp
Specifications
- Model: ATOMIUM CEILING US
- Number of Bulbs: 6
- Maximum Bulb Wattage: 40W per bulb
- Bulb Type: E12
- Voltage: 120V
Product Usage Instructions
1. Unboxing and Inspection:
Upon receiving the product, carefully unbox it and inspect all components for any damage or missing parts.
2. Assembly:
- Identify the ceiling mounting location.
- Mount the base plate securely to the ceiling using appropriate hardware.
- Attach the main body of the ATOMIUM CEILING US to the base plate following the provided instructions.
3. Installing Bulbs:
- Ensure the power source is turned off before proceeding.
- Insert up to six E12 bulbs into their respective sockets on the fixture.
- Do not exceed the maximum wattage limit of 40W per bulb.
4. Power Connection:
Connect the fixture to a 120V power source following standard electrical procedures. Ensure proper wiring with phase and neutral connections.
5. Final Checks:
Before turning on the power, double-check all connections and ensure the fixture is securely mounted to the ceiling.
FAQ
Q: What should I do if a bulb burns out?
A: Turn off the power source, allow the bulb to cool, then carefully replace it with a new one of the same wattage and type (E12, 40W max).
Q: Can I use LED bulbs with this fixture?
A: Yes, you can use LED bulbs with an E12 base and wattage not exceeding 40W per bulb as a replacement for incandescent bulbs.
Installation Instruction
To inspect the electrical connections, remove the canopy enclosure by unscrewing the strain-relief located below it. Pour inspecter les connexions électriques, retirez l’enceinte de la canopée en dévissant la décharge de traction située en dessous.
WARNING
The safety is guaranteed by the appropriate use of the following instructions, so you must keep them. Always disconnect the main voltage before working on the appliance. Never use abrasive products or aggressive detergents for cleaning the lamp. If the external cable of this appliance is damaged, it must be replaced by the manufacturer, its after sales service or other equivalent qualified person only in order to avoid any danger. Kundalini will not provide a replacement until the nature of defect has been determined.
Viale L. da Vinci, 277
- 20090 Trezzano sul Naviglio, Milano
- T. +39 0236538950
- [email protected]